PDA

View Full Version : ka24de tranny bolt patter, DOH


Johny5
07-24-2003, 11:48 AM
Okay, when I took the bolts off the tranny I put them in order. Worst came to worst, didn't have a jack for the tranny, used people to push it up and in, it sucked. One of my friends kicked the bolts out of order. I know the two top ones were long. And the two bottom ones holding the plate on were the short ones with the nuts. What were the starter ones? there's one high up on the starter and two low and dunno how the hell they go. If you can help me get this today then you are my personal jesus.

240racer
07-24-2003, 10:35 PM
You should be able to tell how long the bolts need to be by how deep the hole is, deeper hole longer bolt. It's really not that hard. You already have 4 narrowed down. You are dealing with like 6 bolts that are not all that close in sizes.