REVOisGO
06-29-2010, 11:57 AM
I am going a different route with my 240, and it kills me to let this go after all the work i put into it, but it has to be done.
up for sale is my rb25 motor, with a bunch of parts and lots of hard work. heres some pics and parts list:
http://img.photobucket.com/albums/v461/nick_neitzel/24920_332713973095_500943095_362133.jpg
http://img.photobucket.com/albums/v461/nick_neitzel/24920_332738248095_500943095_362142.jpg
http://img.photobucket.com/albums/v461/nick_neitzel/motorshot.jpg?t=1277834510
- Series 1 Rb25det wired up for s13
- Transmission shifts into all gears smoothly, 2 flushes have been done since ive had it.
- Ogura Racing Clutch Single (brand new JDM!!!!!)
- Chrome Freddy Intake manifold w/new fittings and proper taps
- rb20 wastegate actuator (for 10psi)
- Great condition turbo with no shaft play/smoke
- q45 throttle body and custom throttle cable bracket
- JDMsport big intercooler
- HKS SSQV BOV
- McKinney Ceramic Downpipe for s13
- Custom Steel intercooler piping w/ Bov flange and IACV (leak tested)
- Custom intake piping for proper air filter placement
- Extreme PSI couplers
- custom solid mounts/tranny mount fabbed from JGY mount kit
- JGY Steel driveshaft
- T-bolt clamps
- Custom zebra print valve covers
- Special order NGK spark plugs properly gapped
The motor runs like a champ. This video shows off a lot. Its got a shot of the motor at 2:52, a shot of the intercooler/piping/filter placement at 3:01, and the motor performing throughout. i took first place at this event as well, so the motor definitely delivers:
11255660
you can see more videos of the motor in action on our team website at www.getmoneydrift.com
Now onto the details of the swap itself:
All of the custom work was done by me. The JGY mount kit fit terribly, so the mounts were redone, raising the drivers side of the motor a tad, and making the front mounts solid. a new tranny mount was made to get proper fitment of the motor. There is still only a few millimeters of clearance between the dump pipe and steering shaft which is typical for rb25 swaps, but the motor does not torque so you will not hit the steering shaft, unlike urethane mounts.
Clutch was ordered from japan brand new, was properly broken in, and only saw 4 events before i got shipped off to iraq. Its absolutely incredible, the best clutch I have ever driven and is a rare part as well. Holds tight and is extremely responsive.
The intercooler piping was another custom job, and the overall length of the piping is incredibly short. Throttle response is awesome, and the power is always on. The HKS SSQV Blow Off Valve works awesome, and no compressor surge. Everything has been boost leak tested, and it all checks out.
This motor was in a DRIFT car. That means I had no A/C, speedometer was not wired up along with reverse lights, etc. I left all of the plugs there so it is possible to wire all of these up if you want to, but i did not.
Known problem: only one. the o ring on the injector on cylinder 6 is starting to go out, and leaks a bit of fuel. i saw this at the last event i was at towards the end of the day, and it isnt much. it still ran fine. you will need to replace that o-ring, which will cost you all of $1. THATS IT. i never had any other problems with this motor and i doubt you will either. compression test turned out great when i did it when i first got the motor as well.
Any other questions just ask. DOES NOT COME WITH A RADIATOR.
PRICE: $4000 obo. you come get it. area code 62254
up for sale is my rb25 motor, with a bunch of parts and lots of hard work. heres some pics and parts list:
http://img.photobucket.com/albums/v461/nick_neitzel/24920_332713973095_500943095_362133.jpg
http://img.photobucket.com/albums/v461/nick_neitzel/24920_332738248095_500943095_362142.jpg
http://img.photobucket.com/albums/v461/nick_neitzel/motorshot.jpg?t=1277834510
- Series 1 Rb25det wired up for s13
- Transmission shifts into all gears smoothly, 2 flushes have been done since ive had it.
- Ogura Racing Clutch Single (brand new JDM!!!!!)
- Chrome Freddy Intake manifold w/new fittings and proper taps
- rb20 wastegate actuator (for 10psi)
- Great condition turbo with no shaft play/smoke
- q45 throttle body and custom throttle cable bracket
- JDMsport big intercooler
- HKS SSQV BOV
- McKinney Ceramic Downpipe for s13
- Custom Steel intercooler piping w/ Bov flange and IACV (leak tested)
- Custom intake piping for proper air filter placement
- Extreme PSI couplers
- custom solid mounts/tranny mount fabbed from JGY mount kit
- JGY Steel driveshaft
- T-bolt clamps
- Custom zebra print valve covers
- Special order NGK spark plugs properly gapped
The motor runs like a champ. This video shows off a lot. Its got a shot of the motor at 2:52, a shot of the intercooler/piping/filter placement at 3:01, and the motor performing throughout. i took first place at this event as well, so the motor definitely delivers:
11255660
you can see more videos of the motor in action on our team website at www.getmoneydrift.com
Now onto the details of the swap itself:
All of the custom work was done by me. The JGY mount kit fit terribly, so the mounts were redone, raising the drivers side of the motor a tad, and making the front mounts solid. a new tranny mount was made to get proper fitment of the motor. There is still only a few millimeters of clearance between the dump pipe and steering shaft which is typical for rb25 swaps, but the motor does not torque so you will not hit the steering shaft, unlike urethane mounts.
Clutch was ordered from japan brand new, was properly broken in, and only saw 4 events before i got shipped off to iraq. Its absolutely incredible, the best clutch I have ever driven and is a rare part as well. Holds tight and is extremely responsive.
The intercooler piping was another custom job, and the overall length of the piping is incredibly short. Throttle response is awesome, and the power is always on. The HKS SSQV Blow Off Valve works awesome, and no compressor surge. Everything has been boost leak tested, and it all checks out.
This motor was in a DRIFT car. That means I had no A/C, speedometer was not wired up along with reverse lights, etc. I left all of the plugs there so it is possible to wire all of these up if you want to, but i did not.
Known problem: only one. the o ring on the injector on cylinder 6 is starting to go out, and leaks a bit of fuel. i saw this at the last event i was at towards the end of the day, and it isnt much. it still ran fine. you will need to replace that o-ring, which will cost you all of $1. THATS IT. i never had any other problems with this motor and i doubt you will either. compression test turned out great when i did it when i first got the motor as well.
Any other questions just ask. DOES NOT COME WITH A RADIATOR.
PRICE: $4000 obo. you come get it. area code 62254