PDA

View Full Version : SR20det T3 Bolt On Upgrade turbo


SRKperformance
07-22-2003, 12:34 PM
I have come into possesion of a kkk german turbo off of a proshes 944, its brand spankin new and the housings have been ported and the bearings and oil seals have been teflon and fosfate coated. Ill sell it for 500 bucks + a little for shipping. once again this thing is brand new. The front ar is 60 and the rear is 48 t3 housings on both sides but the flange on the base of the turbine housing is a t2 so it will bolt to the stock sr20det manifold. However it requires an external type wastegate so the stock manifold must be modified to accompany this. should make about 320 whp at 18 psi of boost. Very similar to a big28 except both sides are t3 housings.

[email protected]