Power Window Motor

[drift_newbie]

Driver's side power window motor for 89+ 240sx (used). I bought this thinking that mine was bad, but it ended up being the electronic box that goes between the motor and the switch that was bad, so I have no need for this.

It works fine, as I plugged it into my car's wiring to double check it. Asking 25+ shipping. E-mail me at [email protected] if interested.

Thanks,

-Ben

[dvdevo]

hey my powerwindow for driver's side dont work, when i push the button, the box thats near the mid left of the door clicks..do you think i need a new motor or the controller thing that you replaced? thanks.

[TheSparo]

well mine did the exact same thing, instead of buying the window motor etc, i checked the volatage to see if it was the controller box, sure enough it was, so check the voltage and see if its just the box...

[Twinchy]

i have the same problem with my driver side window. I even replaced my power window motor bfor another used one it was working fine that day until the next day my window just did the something, it kept making that clicking noise in the door. Did i get a messed powwer window motor or is it something else. Because i really need to roll my window down this heat is killing me. Please help me out guys
Richard

[Twinchy]

i did everything you told me to do the window started to work fine but now its not working again. I think its the little black box on the left of the door. Is this a electronic box or the power window motor. pleaase me out again
Richard

[drift_newbie]

Are you sure you cinched down the harness plug to the box tight? If so, I'm not sure what else could be happening. My car was doing the exact same thing, and since I did this, I have had no problems. Maybe you have a loose wire where it plugs into the connector?

Sorry, not much else I know to check.

-Ben

[Twinchy]

i found out what the problem was. I changed the little black box. Now myv window works fine, but thanx again for your help.
Richard

[LaO_AzN_DrGn]

hey i have a question. my 91 240sx coupe did not come with power window, lock, or mirror. so im installing it from a donor 93 240sx coupe. i've installed the passenger side panel and the motor works just fine. then i installed the driver side panel and it too made the clicky noise. i trouble shot it down to the motor because i ran power directly to the motor and nothing happen... i was wondering if it was the little black box or not. or it needs both the little black box and the motor to actually work. if you know anything holla back. thanks.

[sumoboi7]

does the motor come with the regulator