S14 diff into s13 swap

[Schassis707]

I have almost everything ready to go as far as my s14 diff swap.. Pretty much my ring and pinion is shot and I have a s14 diff ready to be swapped in. I have a new gasket and I already know everything as to do it just need help as far as the bushings. I know for the swap I need to put some sort of spacer between the driveshaft and diff(correct me if I'm wrong).. What do I use?

[GSXRJJordan]

Nope, no spacer between the driveshaft and the diff. Were you going to use the S14 front bushings?

[Schassis707]

Idk.. Lol I dont have the stock s14 ones just wondering what people use that isn't expensive and how they did their swap. Would the s14 ones to the subframe work with washers on them?

[GSXRJJordan]

Idk.. Lol I dont have the stock s14 ones just wondering what people use that isn't expensive and how they did their swap. Would the s14 ones to the subframe work with washers on them?

The S14 diff with its bushings in front points the nose of the diff slightly down. Ideally you'd have spacers to use the stock S13 bolts through the S14 diff with no bushings, but just swapping back covers and bolting it up (with the S14 bushings) works.