Master Chief
06-16-2010, 11:42 AM
Hi.
For sale is a FORGE, piston type (T2), waste gate Actuator, and accessories.
This is the best type of actuator available, and far superior to the diafragm type actuator.
Mind you, not all FORGE actuators are the Piston type.
This is the answer, for all of you - internal WG users - NO MORE BOOST DROP AT HIGH RPM.
This actuator is fully costumisable for your application and boost level desires.
- You can change the rod, for a difrent shaped rod or lenth.
- You can change the spring inside, to optimize for higher boost levels, while keeping the full movment of the WG (unlike shortening the WG rod).
- You can adjust the rod's lenght.
- You can use it as a single or dual port Actuator.
I had this actuator COSTUM ordered from FORGE, at the time, for my GT3071-WG, bottom mount turbo, when i had problems keep a costant boost thru the red line, when i was above 21 PSI.
This was on the car for about 100, before i upgraded the whole engine setup.
Everything is like new condition, and most of the parts included, were taken out of thier nylon packages, just for the photos.
Included, is everything i got from forge :
1 X Piston type Actuator assay., fitted with RED ~ 17.5-20PSI spring, and ROD for GT30 series turbo.
1 X Blue ~ 14-18PSI spring.
1 X Rod for difrent application - Heat bend to desired shape.
2 X Rod ends, for difrent applications.
4 X Forge stickers.
1 X Rod boothqdust seal, for use on DUAL port application, or just for dust guard.
1 X Set of Rod booth retainers.
1 X Port nipple, for use with dual port applications.
1 X Set of heat resistant self loocking fastners.
Everyting will come in the original box.
(not all parts in photo)
http://img94.imageshack.us/img94/7619/image169z.jpg
This whole setup retails at FORGE at about 220$.
I would like 130$ , for the whole thing, shipped to you !
SOLD SOLD SOLD !!!
Thanks,
Dany.
For sale is a FORGE, piston type (T2), waste gate Actuator, and accessories.
This is the best type of actuator available, and far superior to the diafragm type actuator.
Mind you, not all FORGE actuators are the Piston type.
This is the answer, for all of you - internal WG users - NO MORE BOOST DROP AT HIGH RPM.
This actuator is fully costumisable for your application and boost level desires.
- You can change the rod, for a difrent shaped rod or lenth.
- You can change the spring inside, to optimize for higher boost levels, while keeping the full movment of the WG (unlike shortening the WG rod).
- You can adjust the rod's lenght.
- You can use it as a single or dual port Actuator.
I had this actuator COSTUM ordered from FORGE, at the time, for my GT3071-WG, bottom mount turbo, when i had problems keep a costant boost thru the red line, when i was above 21 PSI.
This was on the car for about 100, before i upgraded the whole engine setup.
Everything is like new condition, and most of the parts included, were taken out of thier nylon packages, just for the photos.
Included, is everything i got from forge :
1 X Piston type Actuator assay., fitted with RED ~ 17.5-20PSI spring, and ROD for GT30 series turbo.
1 X Blue ~ 14-18PSI spring.
1 X Rod for difrent application - Heat bend to desired shape.
2 X Rod ends, for difrent applications.
4 X Forge stickers.
1 X Rod boothqdust seal, for use on DUAL port application, or just for dust guard.
1 X Set of Rod booth retainers.
1 X Port nipple, for use with dual port applications.
1 X Set of heat resistant self loocking fastners.
Everyting will come in the original box.
(not all parts in photo)
http://img94.imageshack.us/img94/7619/image169z.jpg
This whole setup retails at FORGE at about 220$.
I would like 130$ , for the whole thing, shipped to you !
SOLD SOLD SOLD !!!
Thanks,
Dany.