SR Parts FS

[IketaniS13]

Here is the updated post with some more pics of the parts I had listed.
I have a garage full of SR parts that I am selling. Getting out of the game and starting a new project.
SR engine parts
2 SR Heads
1 SR Block
SR Cams 40
BNIB timing chain 70
BNIB guides 90
BNIB Rear Main Seal 15
SR #62 ECU - Sold
Front lower sway bar with energy suspension bushings 30
SR Intake Mani with injectors, IACV and throttle body
http://i90.photobucket.com/albums/k246/IketaniS13/P6120845.jpg
Exhaust mani 30
stock t25 turbo with all new gaskets - SOLD
stock oil lines for turbo - Sold
http://i90.photobucket.com/albums/k246/IketaniS13/P6120846.jpg
Side mount intercooler (A few bent fins, no leaks) 70
http://i90.photobucket.com/albums/k246/IketaniS13/P6120835.jpg
upgraded stock intercooler piping 50
http://i90.photobucket.com/albums/k246/IketaniS13/P6120832.jpg
supra recirculating valve 30
http://i90.photobucket.com/albums/k246/IketaniS13/P6120833.jpg
Apexi BOV 70
http://i90.photobucket.com/albums/k246/IketaniS13/P6120834.jpg
Cusco 2 piece front strut bar 75
Rear Strut bar (supposedly cusco also but no markings except jdm txt on side) 50
http://i90.photobucket.com/albums/k246/IketaniS13/P6120842.jpg
Tein tension Rods 170 (only installed and drove down my street one time, a little dust and dirt marks on them in the pic)
http://i90.photobucket.com/albums/k246/IketaniS13/P6120840.jpg
SR Downpipe and brand new gaskets (no name company, very well engineered nice welds) 70
http://i90.photobucket.com/albums/k246/IketaniS13/P6120838.jpg
http://i90.photobucket.com/albums/k246/IketaniS13/dpgasket.jpg
SR20det Redtop Engine harness wired for a USDM S13 chassis 180
http://i90.photobucket.com/albums/k246/IketaniS13/P6120831.jpg
Tomei 87 x 1.5mm HG Brand New (still in plastic) 150
http://i90.photobucket.com/albums/k246/IketaniS13/hg2.jpg


SR Tranny Shifts smooth, no grinding - $200 I would prefer local pickup on this item
http://i90.photobucket.com/albums/k246/IketaniS13/photo_2.jpg

Coil Packs -$140
http://i90.photobucket.com/albums/k246/IketaniS13/photo4_2.jpg

Brand New! Oil Pump with Front Main Seal - $190
http://i90.photobucket.com/albums/k246/IketaniS13/photo3_2.jpg

SR Ignitor Chip With bracket and boost emissions valve - 60
http://i90.photobucket.com/albums/k246/IketaniS13/photo3_3.jpg

Walboro 255lph Fuel pump with harness - sold
http://i90.photobucket.com/albums/k246/IketaniS13/photo4_3.jpg

Water pump (used for maybe 3000 miles with pulley) - $50
http://i90.photobucket.com/albums/k246/IketaniS13/photo3.jpg
http://i90.photobucket.com/albums/k246/IketaniS13/photo4.jpg

Knock Sensor - $50
http://i90.photobucket.com/albums/k246/IketaniS13/photo.jpg

SR Redtop CAS - $100
http://i90.photobucket.com/albums/k246/IketaniS13/photo2-1.jpg

SR Crank Pulley with bolt and washer - Sold
http://i90.photobucket.com/albums/k246/IketaniS13/photo5_3.jpg

SR Redtop Cam Gears - $20
http://i90.photobucket.com/albums/k246/IketaniS13/photo5.jpg

Oil Pressure Sensor with oil filter adapter - $20
http://i90.photobucket.com/albums/k246/IketaniS13/photo5_2.jpg

180SX JDM Blinkers (Pulled them off my front clip) SOLD
http://i90.photobucket.com/albums/k246/IketaniS13/photo2_3.jpg

180SX JDM Steering Wheel (Pulled off my front clip) $75
http://i90.photobucket.com/albums/k246/IketaniS13/photo_3.jpg

All parts are OBO. I have more parts to post, I just dont have the pics for them yet. Coming soon. Here's a list of the other stuff I have:



Thats all I can think of right now I will edit this post when I go over my full inventory. If anyone has any questions or wants more pics just PM me. I accept paypal.

[240shorta]

How much for the SR head?

[cramms]

How much you want individualy and together for

t25 (assuming it's in perfect working order)

Cusco 2 piece front strut bar

Rear Strut bar

Tein tension Rods

[240Zfunahollic]

got a hotpipe either with an hks flange on it or no flange? and not to bust your balls but those jdm front lights can be bought from the nismo shop for $23 each... so willing to go 30 shipped for the pair since they're used? The Nismo Shop : West Covina Nissan : Nissan JDM S13 Silvia Turn Signals (http://www.thenismoshop.com/ikorb.php?func=catalog&category_id=3301&product_id=407)

[IketaniS13]

not to bust your balls but those jdm front lights can be bought from the nismo shop for $23 each... so willing to go 30 shipped for the pair since they're used? The Nismo Shop : West Covina Nissan : Nissan JDM S13 Silvia Turn Signals (http://www.thenismoshop.com/ikorb.php?func=catalog&category_id=3301&product_id=407)

Thanks for the info and the link. I didn't check around on the price of that item and should of. I will take offers that are reasonable and fair for that item.

PMs sent

[240Zfunahollic]

Like I said. Willing to take 30 shipped?

[IketaniS13]

Turn signals sold.

Tonight I wil go through my full inventory and take the additional pics of the items that are listed.

[Xclusive_racer]

front chain cover and oil pump assembly. question one is was this ever mounted on the car? question 2 is so your getting out of the game huh? but your starting a new project? doesn't make sense?...just to let you know jgy sells them for cheaper so don't match prices with places because there is always cheaper. glws

[IketaniS13]

front chain cover and oil pump assembly. question one is was this ever mounted on the car? question 2 is so your getting out of the game huh? but your starting a new project? doesn't make sense?...just to let you know jgy sells them for cheaper so don't match prices with places because there is always cheaper. glws

1. Still in the the plastic bag from when I purchased it.
2. Starting a new project with a truck.

The purpose of matching the price with Enjuku is because that is who I purchased the item from. I also specified that all items are OBO. If you look hard enough you can find anything for cheaper. The price is a guide not an exact price match as you say. If so I would of said firm. Make me an offer if your interested.

[Xclusive_racer]

hey not trying to attack you i was just trying to help out...ill let you sale your stuff and if it doesn't sell in a week ill shoot you an offer

[ayororo]

How much for a good cond. SR Head?

[IketaniS13]

Bump. Still have alot of parts left

[kakashi07]

How much for both strut bars?

[niSm095]

pm'd on the apex bov

[aeros]

what is the condition on the t25?

[jc_rps13]

please pm me prices on the:
t25 turbo with lines
sr downpipe
tomei headgasket

Thanks! oh yea Im almost local too

[IketaniS13]

Out of town over the weekend. PMs sent to all

[paraplegic]

Price on head please. don't want to put s14 notchback daily out to rebuild the head.. would rather rebuild an extra one.

[Napalm]

Would love to get those downpipe gaskets from ya, price shipped to 34436? <Paypal --pm me what you think

[Fullboost99]

how much for the SR# 62 ECU? Shipped to 28269

[thoma16]

Any chance you have the throwout bearing assembly? Mine cracked

[IketaniS13]

Any chance you have the throwout bearing assembly? Mine cracked

Actually, I do have the assembly. you need the fork, clip and bearing correct?

[Blackerninja]

Even though like 4 people asked, do you still have the T25? I'm over in tampa so shipping wouldn't be that bad.

[Bushido]

interested in the sway bar and strut bars, get at me with a price! i'll pick it up if need be.

[DJPimpFlex]

Wanna PM me a price on the Tomei HG?

[Benster]

got any oem rods laying around pm. or you can email me at [email protected]

[GoNissanGo]

USDA uh? Lol USDM that's cars but beef is what's for dinner glws

[casten01]

PM me ur number! i'll get ur HG from u! I live in JAX!!!

[IketaniS13]

USDA uh? Lol USDM that's cars but beef is what's for dinner glws
Lol I just saw that :duh:

[MtxWrl]

pm sent bump.

[kbui]

just pmd you

[iTUNE504]

turbo setup how much and will you ship

[IketaniS13]

Turbo sold

[hdz123]

hey why dont you reply to my pm's? i paid you for the lines and havent heard back from you

[Blackerninja]

Yeah this guy is really bad with communication.

[hdz123]

is this guy a phony or what? if so i need to get my money back. sucks i really need the things he was supposed to sell me :\

[mr.s1392]

how much for the harness and ecu together??..a buddy of mine needs one asap. and shipped to 27265.

[IketaniS13]

Pmed everyone. Sorry for any miscommunication. I was on vacation. Next time I leave for 4 days (2 business days and 2 weekend days) I will run it by everyone on the forum. Four days on vacation is hardly grounds for complaints. Parts are shipping this week.

[slideslidegnarslide]

interested in a grab box idk if you have pistons valves rods bare heads blah blah what ever pm me we can figure something out

[IketaniS13]

Oil lines and turbo outlet and inlet sold.

[outlaw9958]

How much for the tension rods?

[IketaniS13]

pm's sent. updated post

[Jbma327]

you should post prices on the items, would help your sale and make it easier for buyers

[IketaniS13]

Updated the rest of the post with prices. Thanks for the input.

[racerx2k1]

Turn signals sold.

Tonight I wil go through my full inventory and take the additional pics of the items that are listed.

Bump. Still have alot of parts left

Out of town over the weekend. PMs sent to all

Turbo sold

Pmed everyone. Sorry for any miscommunication. I was on vacation. Next time I leave for 4 days (2 business days and 2 weekend days) I will run it by everyone on the forum. Four days on vacation is hardly grounds for complaints. Parts are shipping this week.

Oil lines and turbo outlet and inlet sold.

pm's sent. updated post

Updated the rest of the post with prices. Thanks for the input.

2 bump limit. You can start new thread in 3 days.