1991 240sx SE

[240sxfamily]

Name:nick merrone
Location: Philly
contact: PM ME or 267 206 7462.
What: 1991 nissan 240sx SE
Mileage:120,xxx on body, 86 miles on the motor, yes only 86..
Title status:clean
Price:3500 or trade, i got an offer for 3200 so thats what ill go off of.

IM JUST TESTING WATERS, DONT NEED/WANT to sell. Just entertaining offers..

Quick story on the car, bought it, automatic blown KA, made a s14 KA look nice, changed all the gaskets, later on the head gasket and valve seals went, so i did a full top end rebuild, using all brand new OEM parts on the head, EVERYTHING was replaced. ARP head studs, cometic gasket etc etc. Car now runs good, I never get to drive it cause im 16, no license yet. so yeah...To me the car is worth more then 3k. because what i just put out..but yeah..If needed i can get receipts for most of the stuff...but if you want me to list the prices, it'll add up to over 3500..so yeah.


Current Mods:


Motor & Drive Train


Semi Built S14 KA
MSD blaster Coil
Gutted Intake manifold
New cap and rotor
New plugs and wires
Head was machined, decked, every piece in head was replaced
ARP Head Studs
Cometic Head gasket
Brand new water pump
Polished bolts throughout whole motor
Ebay Header(I have intentions on boosting it.
Ebay Downpipe
HKS Hi Power Exhaust
Mishimoto Radiator
Maxima Fans
5 speed swap
ACT Clutch
Rebuilt Starter
Megan Short throw shifter
A few more things im missing


Interior


S14 Seats
S14 Seat belts
S14 Rear seats
Mint Dash
Mint steering wheel
Broadway 300mm Mirror
Pioneer headunit
OEM nissan shift boot(rip offf, but so worth it)
5speed shift trim
Battery relocated to trunk, in box.


Exterior


Pignose Lip
Mudflaps


Suspension


ISIS BASIC HR+ Coilovers
Godspeed RUCA'S
Nismo Powerbrace
Energy suspension Tension rod bushings
Energy suspension Front endlinks
VLSD
Front Strut bar
Rear Strut bar
Hicas Rear Sway bar


Brakes


Brembo Slotted Rotors
Hawk Pads
Brand new BMC


Wheels


17x9 XXR 962 +35 offset in rear(grey)
17x7 Sportmax 962 +35 offset in front(grey)




http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs594.snc3/31318_1381056060214_1646311531_877151_3714210_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs534.ash1/31318_1381056340221_1646311531_877152_6847959_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs534.ash1/31318_1381055980212_1646311531_877150_981058_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs534.ash1/31318_1381055820208_1646311531_877149_7328948_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs574.snc3/31318_1381055580202_1646311531_877148_1991366_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs534.ash1/31318_1381055380197_1646311531_877147_7775236_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs574.snc3/31318_1381055260194_1646311531_877146_5355206_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs574.snc3/31318_1381054780182_1646311531_877144_6357064_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs594.snc3/31318_1381054700180_1646311531_877143_2308856_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs534.ash1/31318_1381054500175_1646311531_877142_1306617_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs594.snc3/31318_1381054300170_1646311531_877141_1519179_n.jp g
http://hphotos-snc3.fbcdn.net/hs574.snc3/31318_1381053940161_1646311531_877140_7315450_n.jp g
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs495.ash1/27046_1286849425107_1646311531_678136_6367677_n.jp g
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0811.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0777.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0778.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0764.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0779.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0815.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0338.jpg

starting to pull the old blown KA out..
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0392.jpg

Here is the s14 motor i did a small rebuild on, brand new gaskets everywhere, then later the head got all messed up which made me build the head:
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0335.jpg


here you can see the paint isn't as shitty as it appears.

http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0754-1.jpg
http://i59.photobucket.com/albums/g299/Nickmerrone/DSCN0759-1.jpg

[240sxfamily]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs637.snc3/31978_1395988513516_1646311531_914531_6650267_n.jp g

[maxxdsix]

clean car, are you on TST? if so il PM you about the car over there because idk how often im gonna check on here being i dont own a 240

[240sxfamily]

im on there, but its easier to contact me on 240sxfamily.com, my site.

But I'm really going to only sell it if i get an offer i want. Or a trade i want.

[240sxfamily]

got an offer for 3800 so far..I'm liking the offers.

Its garage kept if that matters..

[jbretz]

i guess ill give you a bump nick. if your interested ill buy your motor setup from you.

[240sxfamily]

i guess ill give you a bump nick. if your interested ill buy your motor setup from you.

no thanks bro if i was to pull the motor id keep it my self. cause I'd know who rebuilt it and what not, ya know? Everything was done by me.

anyways i got offers today for 3500, 3000, a 1996 beemer, a 2000 audi with too many miles and a sileighty..

keep the offers coming..

[240sxfamily]

bump car needs to go now, need room for the new whip.

[240sxfamily]

someones gonna snatch this up soon i hope.

[240sxfamily]

ALL FLAKES had 12 people look at it. Oh lemme go check my money. im so mad. someone buy this.

[RB24_S14]

Nice car. If I had the cash.. =/

[240sxfamily]

so do i!!!

If anyone can come to my door with 3k cash they can take it. thats the lowest im going though..

[racerx2k1]

got an offer for 3800 so far..I'm liking the offers.

Its garage kept if that matters..

bump car needs to go now, need room for the new whip.

someones gonna snatch this up soon i hope.

ALL FLAKES had 12 people look at it. Oh lemme go check my money. im so mad. someone buy this.

2 bump limit. You can start new thread in 3 days.