Need some help wiring Cruise Control with aftermarket steering wheel - S14

[roel03]

I am trying to make my cruise control work with my Nardi wheel, but need some help. The cable and everything was never removed just the wiring behind the stock steering wheel. I still have the original buttons and the red,red,yellow,blue pigtail that is attached to it. What do I wire these to? I have a brown male plug and a yellow male plug behind the column that are not connected and was guessing these are involved.

Any help?

[miravete]

yellow plug is for the steering wheel air bag.

brown one dunno lol

if you didnt cut any wires the wiring should be inside the steering wheel.

thats were the connector to the cruise buttons is at :)

[roel03]

I have the pigtail off the buttons but dont know where to wire those. Thats what I am asking help finding.

[miravete]

the buttons are the female plug. the male plug is attached to the steering wheel. so if you have the steering wheel it should be there. then that plug connects to the wiring thats left. :)

[miravete]

or just check out the fsm and itll tell you where each cable is at :D

[roel03]

I dont have anything past the button female plug. So I need the wiring left on the steering wheel.