s13 ka parts on a s14 ka

[240sx1234]

Probably going to get crap comments about this thread,but if your going to reply at least give some helpful info.

I have a buddy who has a s13 that he turned into a track car.He swapped his ka for the sr, and now has the ka just sitting in a storage room. He has greddy headers, koyo radiator, the throttle body has been bored out..so im wondering if that will fit too. He also has some camshafts and a jim wolfe ecu. Will this stuff work in my s14 ka or am i out of luck?

[iROYAL]

Well I know one thing, the radiator won't work. I think everything else will, and I'm not too sure about the ecu.

Edit: The difference between the radiators is the upper mount brackets and the coolant return line is on the opposite end. So if you can rig up something for it then it will work.

[sliptones629]

some not all. TB, Radiator and ECU wont work. need lower intake for the tb to work

[bb4_96]

Why won't the throttle body work? I'm pretty sure they are the same? The ECU should work if you are using a dual cam KA ecu on another dual cam KA but once again I could be mistaken.

[sliptones629]

The lower plenums are different from s13 to s14.

[GunmetalSR]

actually everything u listed will work
the rad wont be a direct fit at all but the hoses work fine and wat not...i hav an s13 metal rad on my s14
the jim wolf ecu will work u jus need a jumper harness and i know emance makes one
the throttle body bolts up fine and the tps conects fine but i dont know if the tps will work properly...mine was out when i put it on so i cant say if it will work but i used my s14 tps and of course the cams will work fine