KA24E Parts: Light Flywheel - UR Pulley - HS Headers

[old_s13]

I am selling my KA lightened flywheel, HotShot headers, and UR racing pulley. I already sold the intake, that is the last of the parts left on my KA.. if anyone wants them, PM me.

Price and details of parts for sale, for SOHC KA24E (89-90) motor:

The flywheel is OEM NISSAN and was lightened by Top End Performance, a reputable engine builder out here in SoCal. I am selling the flywheel, 240Z clutch, pressure plate, and throw-out bearing. Its all in excellent condition as they have less than 4 months of use! For sale, $300.

The header is a 4-2-1 design made by HotShot. It has been re-welded to a 1-piece design vs the original 2-piece. The header has about 1 year of use, its still in very good condition. I am selling it for $250.

The UR pulley is black in color and in excellent condition. Other than a slight reduction in alternator charge and AC performance (only at idle), the pulley gave me no problems. I still have the belts and the P/N's for the belts, should you want them they are yours. I only used (and continue to use) OEM NISSAN belts, so take them if you want them. For sale, $110.

Thanks!

[old_s13]

Picture of UR pulley vs stock:
http://clearcorners.com/240sx/Mechanical06.jpg

Picture of HS header on car (a bit of hand grease on it, sorry!)
http://www.clearcorners.com/swap06.jpg

No picture of flywheel, but take my word for it.. with only 4 months of use, its in EXCELLENT condition.

- Mike

[old_s13]

FYI, any other parts you guys happen to want, let me know. The KA24E you see pictured is for sale, complete with ECU and rebuilt head. I also have yet another spare KA24E in my storage, that is also for sale.. very very cheap.

If you guys happen to want cheap KA's to tinker with, TAKE THEM. I am in Los Angeles. I also have a 5-speed KA transmission that is for sale.

Also, several people asked about the valve covers and ECCS intake manifold. The red ones you see online are for sale, the ECCS writing was shaved and removed. I also have blue valve cover and intake manifold, it looks like this:
http://clearcorners.com/240sx/Mechanical02.jpg
http://clearcorners.com/240sx/Mechanical03.jpg
http://clearcorners.com/240sx/Mechanical04.jpg


ps: The KA you see pictured has a brand-new water pump and alternator, I have receipts for them with lifetime warranty - take the receipts and enjoy lifetime warranty. AC compressor worked fine too. Head was rebuilt about 50k ago, full valve job plus I changed the hydrolic lifters.. all very much worthwhile and useable if you weer like me and like a strong and reliable SOHC motor.

- Mike

[old_s13]

Also have a set of Magnecor KV85 8.5mm silicon spark plug cables for the KA24E 89-90 motor. I have had several sets of spark plug wires and these are, hands down, the best quality wires for this motor.

http://clearcorners.com/magnecor1.jpg
http://clearcorners.com/magnecor2.jpg

$30/set

[old_s13]

Here are some more pictures of the HotShot header:

http://clearcorners.com/hs1.jpg
http://clearcorners.com/hs2.jpg
http://clearcorners.com/hs3.jpg
http://clearcorners.com/hs4.jpg
http://clearcorners.com/hs5.jpg

[technochronic]

if you still have the hs header, i can have an MO out on friday. let me know.
Ken McKenzie

[dmaestro]

Hey I'll take your Magnecor 8.5 wires for the sohc. I sent you a email, dunno if you got it. Do you take paypal? Send me an email [email protected]

thanks

[old_s13]

Thank you to everyone who has shown interest in all of these parts. I have responded to several e-mails these last few days, please be sure to get in contact with me if I *havent* responded.

Just to let everyone know, I am selling all of these parts as soon as possible. If there is something you see and something you want to buy, the first person to PAY is the first person who will receive it. The new motor is here and I *must* get rid of all these older components to make room in my storage. Should anyone be interested, please dont hesitate to e-mail or call.

With all of the e-mails I have traded, I leave my full contact information.. please do the same. I would rather talk to someone in person than trade e-mails.

Thanks again everyone. Feel free to e-mail if you have any questions,

- Mike

[old_s13]

Bid away...

HotShot Header:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2425744447

Lightened Flywheel/Clutch Combo:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2425745440

ps: SOHC KA motors are still available, $100/pair! First person to take them gets them both.

Mike / 323-653-5046

[Nismo240SX]

what about that intake, are you parting out with that? i know this is an old post, but still.

[wpayne]

Originally posted by old_s13
I already sold the intake, that is the last of the parts left on my KA.. if anyone wants them, PM me.

[Nismo240SX]

haha, stupid me :doh:

[240sxspeedracer1]

damn, I missed out on this shit!!

[RedlineRacer]

You still have the UR pulley. It will work for a DE right?