PDA

View Full Version : KS Brn2Slid's Garage sale... Come on in!


brn2slid
06-10-2010, 05:02 PM
Parts are listed very randomly, I will try to clean it all up when I get time. Also, I will be coming across more parts as I find them, so keep up.
Thanks

All parts with * have less than 4k unless otherwise mentioned:
*Tein Super Drift coilovers - SOLD
*Tein Tension rods - 200
*Tein tie rods - 120
*Tein strut bar Front and Rear - SOLD
*Ksport rear camber - SOLD
*Ksport rear toe - 130
*Driveshaft shop 1pc steel driveshaft (7k) - SOLD
*Kaaz 2-way LSD in pumpkin with a box of Kaaz fluid - 700 for diff - 49.50 per can of fluid, will cut a deal if you buy it all from me
*Greddy profec b(7k) solenoid is funky - 150
*AEM wideband(7k) - SOLD
*Defi blue racer Oil PSI - 200
*Center vent 2 gauge pod - SOLD
*S13 Digital climate control already converted ready to plug and play, all sensors included - SOLD
*3" straight back exhaust to Apexi N1 gunmetal muffler(7k on piping, not sure on muffler but it muffles as any other N1) - 250

http://i5.photobucket.com/albums/y161/SkilviaRB26/IMG_5945.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/IMG_5955.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/IMG_5957.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/IMG_5958.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/IMG_5959.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/IMG_5964.jpg


Brand New parts:
Comp clutch flywheel - 270 to add, I found my old clutch setup with about 5k on it, ACT 1x pressure plate and unsprung 6-puck disc - 450 for the full set
EBC complete brake setup with russell SS lines - 500
SR S13 Koyo Rad - SOLD
FAL 345 shrouded fans - SOLD


Bought these a while back thinking i would use them but i dont think i am now..

the have some rash, good tires 250

Top and bottom are the rear, middle two are the fronts. As you can notice, the top one has a little bit of camber wear, no cords showing at all. The middle two are perfect tires with lots of life left, the bottom is just a monstrous tire with no camber wear and lots of life left
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/DSCF1922.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/DSCF1931.jpg
Rear #1, taped off, I was going to clean them up a bit
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/DSCF1930.jpg
Rear #2- clear chipping off, worst wheel of all, sand down clear and reshoot
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/DSCF1928.jpg
Front #1
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/DSCF1925.jpg
Front#2
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/DSCF1924.jpg


Brand new Apexi Neo, still in box - 300

Defi D-gauge
Boost - 150
EGT- missing sensor make offer
225 for both
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item097.jpg

Autometer pro-lite shift light - 30
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item021.jpg

Autometer RPM switch - 70
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item034.jpg

S13 EBC Brakes (rotors/pads/lines) - 500
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item062.jpg

Memphis coaxials 6.5 - 80
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item046.jpg

2 x Diamond 5.25 - 80
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item108.jpg




MSD Digital 6 - 200
MSD Blaster 2 coil - 20
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item088.jpg



A/C Autotechnic oil pressure - 40
A/C Autotechnic volt - 40
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item042.jpg

Eclipse 55090 – 300
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item110.jpg

Eclipse vm7211 – 200
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Item109.jpg

1 Breather tank with fittings - 20
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Picture027.jpg

Magnaflow 3" muffler w/hanger - 160
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Picture028.jpg
http://i5.photobucket.com/albums/y161/SkilviaRB26/For%20Sale/Picture029.jpg

as an addition, I also have, but no pictures of:

S14 Zenki headlights (yes, the "JDM" ones) one has been cut to attempt retrofit by previous owner
S14 95-96 USDM headlights
S14 Zenki circuit sports clear headlight lenses
TSX Projectors (no bulbs/ballasts)
For all of this -

Toyotahttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/#) HID's, not sure which... PM for details if interested

HKS SSQV BOV - 150

Z32 TT wheels - 250

Precision Power PC2150
2 x 150W @ 4 ohms
2 x 300W @ 2 ohms
1 x 600W @ 4 ohms bridge
Asking $old

Eclipsehttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://zilvia.net/f/#) SW7200 12" Dual 4 Ohms Titanium DVC Series Subwoofer
Peak: 1500 watts
RMS: 500 watts
Impedance: Dual 4 ohms
in box
Asking $old

Memphis 16-MC3004
4 x 75W @ 4 ohms
4 x 115W @ 2 ohms
2 x 230W @ 4 ohms bridge
Asking $180

Diamond Audio TDX 10 dual 2 ohm
Price: 350

Eclipse 32440 4/3/2 4ch amp
Price: 280

Eclipse CD7000
Asking $300

180sx Tail lights (L/R/Center garnish)

180sx/Silvia Vin plate

Twin Cam Turbo Charged under tail valence in black

180sx/Silvia cluster



Many more items to come, PM me for any info you may need regarding parts or purchasing info

d0pe240
06-10-2010, 07:06 PM
pics of 180sx tails please.

brn2slid
06-10-2010, 07:19 PM
Will do sir, with prices too... It's be tomorrow or Tuesday the latest

hey808
06-13-2010, 03:45 PM
Are those stainless brake lines for stock S13 fronts, or for Z32? If for stock S13 wanna sell just the lines? Email me at: [email protected]

Drift_This
06-13-2010, 05:22 PM
Damn I'd love to get that digital climate control if I had the money.

PS where did you get the center vent gauge pod?

WheelWhore
06-19-2010, 02:39 PM
I want the breather tank. pm me.

catthefish
06-19-2010, 05:33 PM
i want the climate control email me [email protected] see how we can figure shipping, let me know

brn2slid
06-22-2010, 10:23 AM
Are those stainless brake lines for stock S13 fronts, or for Z32? If for stock S13 wanna sell just the lines? Email me at: [email protected]

They are for stock 13 but selling as a package deal as of now

Damn I'd love to get that digital climate control if I had the money.

PS where did you get the center vent gauge pod?

Let me know when you get the spare cash, and ebay has a wide selection of the vent pods

I want the breather tank. pm me.

PM sent

i want the climate control email me [email protected] see how we can figure shipping, let me know

PM sent

For future reference, please pm me.

As for the pictures, I have been really busy lately and have not had time yet but I will get to them as soon as I can. Thank you for your patience.

deadghost
06-22-2010, 08:41 PM
Pm sent, im down to take the DCC.

240orNothin'
06-22-2010, 08:51 PM
Tie rods shipped to 32837 , how much would that be

brn2slid
06-23-2010, 12:17 PM
Tie rods shipped to 32837 , how much would that be

Smaller items such as this would be standard usps flat rate

brn2slid
08-11-2010, 01:09 PM
Bump! Been too busy to get all pictures, if there is a part you want, and have cash ready to give me, I'll make sure I get you a picture or two

KC_240sx
08-23-2010, 07:59 PM
still have the parts?

brn2slid
08-23-2010, 11:31 PM
still have the parts?
what are you going for? Shoot me a pm

brn2slid
09-12-2010, 10:09 AM
I have a couple more photos, if interested, please let me know I'll get them to you as soon as I can. Parts need to get gone! Shoot me a pm with any of your wants and needs! As long as it's on my list, of course

brn2slid
09-29-2010, 10:32 AM
I know you guys want this stuff, make them offers... Lock me up:hsdance:

brn2slid
10-06-2010, 03:42 PM
can take trades for 18" wheels 5x114.3 mid 30 offset or lower, imac/macbook, its a stretch, but, nrg short hub and lock for 97-8 240sx, 4 circuit sports exhaust hangers, greddy or HKS sr fuel rail, ID1000cc injectors, more to come as i think of it.

FYI, this goes for everything I have for sale, in all my threads.

240knockout
10-07-2010, 12:29 PM
pics of tension rods

brn2slid
12-09-2010, 05:55 PM
pics of tension rods

Sorry for the delay, I'll get pictures hopefully Tuesday next week

racerx2k1
12-10-2010, 10:24 AM
Bump! Been too busy to get all pictures, if there is a part you want, and have cash ready to give me, I'll make sure I get you a picture or two

I have a couple more photos, if interested, please let me know I'll get them to you as soon as I can. Parts need to get gone! Shoot me a pm with any of your wants and needs! As long as it's on my list, of course

I know you guys want this stuff, make them offers... Lock me up:hsdance:

can take trades for 18" wheels 5x114.3 mid 30 offset or lower, imac/macbook, its a stretch, but, nrg short hub and lock for 97-8 240sx, 4 circuit sports exhaust hangers, greddy or HKS sr fuel rail, ID1000cc injectors, more to come as i think of it.

FYI, this goes for everything I have for sale, in all my threads.

2 bump limit. You can start new thread in 3 days.