S13 RB20det build

[gonshik007]

I have been on zilvia for about a year but haven't really done much or really introduced myself.

Well here is my build that I have been working with for the past half a year!

Bought this car in january

Bought it none running with wiring and some other issues!

Got it running in about a couple days.

then for the longest time ever I have been trying to track down the sputtering issue to find out it was a cracked coil.

When I got the car it was covered in this nasty green stuff that I don't know what it was because it wasn't like paint, more like primer I guess. So underneath that nasty green was a very nice coat of beautiful black paint.

The body is not perfect but since I am going to be drifting this I am not to worried about the body just yet, that will come once all the engine and suspension stuff is out of the way!

Installed the safc II because I didn't have the rpm dohc cluster or an rmp guage and I also did not have the stock j60 maf so I thought I needed the safc. Sold the safc and planing to get either nistune or an eprom chip tune by Carl H.

Found some interior pieces at junk yards and forums got that installed.

And here are the pics of how I got her and what I have been doing with it!

Found a J60 Maf and installed that.
boost guage is installed
Seats are inn, Harness bar and seat-belt harnesses are in.

Installed the rear triangle strut bar.

Then installed the Wideband O2, the Diff, and Had some JIC Coilovers

YouTube - RB20 s13 first time drift Streetwise May 22nd. part 1 (http://www.youtube.com/watch?v=igGWqGxDpoU)

And then after a very long time I took it out which was last month to streatwise and gave it a little drifting action.

Didn't like my blown front shocks and that horrible understeer so I sold the jic coils and as of today waiting on my Megan Tracks, rear RUCA's and will be putting on some Sportmax 562's 17x9 in the back and some other unknown 17's in the front with an inch spacer.

As of now it is up on jack stands!

Should have pic's and the install of all this wonderful stuff this week.

Thats about it as of now.

[ultimateforce]

You lucked out on that paint clean up.

[gonshik007]

You lucked out on that paint clean up.

Actually it was a pain and it still needs to get repainted but for now its shiny and black and that's totally fine with me! haha


Yesterday installed front spacers and now waiting on my coilovers that I bought from a zilvia member killab18
BTW great, guy and seller, amazing communication

Pic's that he sent me before he sent them off to me! Hopefully it will be here Friday Saturday.
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/IMG_0146.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/IMG_0147.jpg

[Om1kron]

this will get locked bro. not a completed car, still in progress.

[gonshik007]

So zilvia doesn't allow build threads?

[drifting240]

lovin the accords in the back round lol

[SilDrifter69]

looks good.

[gonshik007]

haha lol ya two of them are my dads and the one in the garage is my buddies had to fix some stuff I think we were working on the brakes that day!

[gonshik007]

I should be putting on the suspension today or tomorrow!

[gonshik007]

Yesterday installed my coilovers and test fittet the rims!

Dropped the car off the jacks and its still JACKED UP literally way to high off the ground.

So I start lowering the front and well find out that the coil is seized up :( Coming home after work in hopes that I can get it loose!

Here are some pics of the way it is now!

[flybye]

You have made a lot of progress...it isn't looking too bad so far. Keep up the good work man.

[gonshik007]

You have made a lot of progress...it isn't looking too bad so far. Keep up the good work man.

Thanks man Hope to get it up and going today! and then back to body work :)

[gonshik007]

Allright Yesterday got the coil done! Very sad about the way I had to fix this issue but that was the only way possible to do anything like that :( but ehh it is fine and actually better then before (because the coil will never get sized up now :)

So I Put it all on yesterday and took it for a ride! and it really isn't all that stiff for daily driving when its on the soft setting (I have never driven anything but lowered stiff cars haha!) So this is what it looks like now! BTW if anyone has a freezed up coil let me know I will help you out!

http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/P1150133.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/P1150132.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/P1150131.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/P1150130.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/P1150129.jpg

The car was fully jacked up and was standing on jack stands so I felt pretty safe haha.

But I do need alignment pretty bad!

[gonshik007]

Went drifting and well it was over heating all day, and at the end of the day when I was allready comming home it started running lean under full boost which gets me to thing that all my fuel filters and fuel sock need to get replaced.

[gonshik007]

Alright! Got the cooling taken car of! and Now the power steering is working. and waiting on my intercooler! :)

[gonshik007]

Intercooler is finally on after some headache. so Ehhh

but finally its up and running!

http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/58416_433745057942_501502942_4940128_4668770_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/58231_433745227942_501502942_4940131_8037420_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/58217_433745232942_501502942_4940132_7237833_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/46929_433744997942_501502942_4940127_6668985_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/IMAG0015.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/IMAG0013.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/46151_429306277942_501502942_4842199_1117227_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/300zxRolling.jpg

[gonshik007]

Wow loved the way the car ran this past Saturday :) that was amazing experience and I learned a lot.

So next on the list for the car. Chipped - Tuned, E-brake.

http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1170073.jpg
http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1160987.jpg
http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1160984.jpg
http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1160973.jpg
http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1160971.jpg
http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1160970.jpg
http://i179.photobucket.com/albums/w297/mishka_007/Sep%2018%20SWD/P1160968.jpg

YouTube - RB20DET s13 SWD Sep 18 (http://www.youtube.com/watch?v=w-lsTwV-m4Y)

YouTube - RB20 Not to bad of a drift (http://www.youtube.com/watch?v=4OQsel4oT-k)

YouTube - Cone Steal Drift s13 Rb20 (http://www.youtube.com/watch?v=0xDeHDxeBEI)

[Lappede36]

plus one for another charlotte build looks good.

[eklips3]

not sure if its just your girlfriend who's russian in your video's or if you both are russian. but you gotta make a huge sticker on your car saying "from russia with love"..... lol

anyways good job on the build man, it came a long way by the looks of it.

[gonshik007]

not sure if its just your girlfriend who's russian in your video's or if you both are russian. but you gotta make a huge sticker on your car saying "from russia with love"..... lol

anyways good job on the build man, it came a long way by the looks of it.

Thanks Actually I am russian and that was my sister. haha and about the sticker I will think about it, maybe I will.


Thanks for the input guys.

[Datenshi]

What size and offset are those rims? The silver 5 spoke star ones, and also what size tires are you running front and back?

Edit: Front and back rim size too please. :D

[gonshik007]

In the front I have no Idea but I think its 17x7.5 and there is a 1" spacer and 225/45/17 and the rear are the sportmax 962 with 17x9 245/45/17

[MillS14]

Hey man, great build! I've been contemplating on picking up an RB20 for a while now myself. I'm interested in how you freed the seized coilover lol. A friend and I had the same problem on a set he picked up for dirt cheap, but he's yet to do anything with them yet cuz one is seized.

[sansanchi89]

nice build. great to see more russians.

[japordie]

cool, its nice to see someone start and finish a project. thats uncommon these days, good stuff and stay side ways.

[Bubba Chaos]

Nice seeing a build thread, they always seem to motivate me

[gonshik007]

Thank You guys for all the comments! As an update I have installed S14 rear brake calipers. Chipped the ecu and got a base tune from Carl H. And have been messing around with the consult cable a bit. Picking up some sportmaxxs 962's today hopefully I will get some pictures up.

[HPKMotorsports3]

Woohooo RB :ddog: lol... Nice job with your build Keep it up

[gonshik007]

Thanks

Getting some studs in tomorrow and will be able to run the xxr's safely Finally. Going home now to beat out the old studs :)

[gonshik007]

http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/66560_450168042942_501502942_5271779_6667496_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/65903_450168047942_501502942_5271780_717955_n.jpg
http://i179.photobucket.com/albums/w297/mishka_007/240sx%20Project/68330_450167957942_501502942_5271778_2406066_n.jpg

Got 962 all around with a 10mm spacer and extended lugs up front and loving it :)

[gonshik007]

yay picked up another 240 :)))))

http://i179.photobucket.com/albums/w297/mishka_007/New%20RB-v2/0422011602.jpg

Got it running with a new turbo yesterday. Need to fix the tune on it. seems to be running really rich.