Almost SoCal Sale

[st280]

Just cleaning out the garage, trying to get money together to get me a tune, and some suspension ish. I'm located in Bakersfield, CA. I can ship/meet up/whatever for the right prices. I'm going to be down in Los Angeles, for EDC June 25th-27th. I'll bring parts with me if you want.

Got 2 N60's ($50 shipped) [1 sold], 1 E60($30 shipped) MAFs:
The 3 n60's have both screens and pigtails, and are in good condition. The e60 is missing one screen, and pigtail.
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03535.jpg

Have an SR20det intake manifold, with throttlebody, IACV etc.($60)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03549.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03531.jpg

An adjustable wastegate actuator. I took it off of my FP 20g, and swapped it out with an HKS. Same bracket as T25/T28. ($50)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03534.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03533.jpg

SR20det redtop injectors, 2 missing pintle caps. All need o-rings. ($50)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03530.jpg

Brand new Greddy / Trust oil block adapter ($40)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03523.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03524.jpg

240sx stock headlights the ones with the bulbs built in ($20)

http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03522.jpg

Some random big ass NISSAN throttle body(off of either a q45 or j30?) ($60)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03521.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03518.jpg

Sr20det clutch disk. Worked fine when I had it in my car, but switched to a springed. ($30)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03519.jpg

Sr20det redtop valve cover. Has a broken bolt for one of the coilpacks. ($40)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03515.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03516.jpg

S13 sr20det non-abs manual driveshaft. Complete your 5 speed swap! Will not ship this bitch. ($30)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03513.jpg

Sr20det clutch fan, fan shroud(no cracks), radiator(s13) don't think it leaked when I had it in my car. ($70 for all 3) ($20 each)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03512.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03511.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03509.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03508.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03505.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03504.jpg

A kinda beat up imola steering wheel. ($25)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03507.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03506.jpg

S13 front calipers, and cross drilled/slotted rotors. Worked fine when taken off, I just upgraded to q45. ($50)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03503.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03502.jpg

Sr20det redtop T25, with exhaust manifold, outlet, and one of the lines. I used the other line for my 20g. Everything boosted fine, stayed at 10lbs nothing higher. ($140)
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03501.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03500.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03499.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03498.jpg

Tenzo racing seat, I had it in my car when I bought it. It's comfortable, but my head was kinda close to the ceiling for it. I'm 6 ft tall. I don't know a price for it, shoot me an offer.
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03528.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03525.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03527.jpg

Have a redtop sr20det, with freshly powdercoated gray valve cover(dirty). I had this in my car, I fuxed up an injector install (one of the o rings was too small). Flooded the engine with fuel, seeped past the rings. Now there is low compression in all 4 cylinders. When I did compression awhile back I think all 4 were around 115. I'm PRETTY sure it's just the rings that need to be replaced, I'm too lazy to try to fix it. Was cheaper for me to swap out a new SR then to try to fix this one at the time. Shoot me offers for it, if offers are too low, I'm just going to build it.
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03553.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03552.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03551.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC03550.jpg

N62 Maf, w/pigtail. Clean. ($90 shipped):
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04069.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04068.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04067.jpg

S13 seat, needs cleaning on bottom portion (sorry no pic), no tears. Shoot offer.:
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04076.jpg

S14 seat, clean. One tiny tear, see if you can see it haha. It's on bottom portion. Shoot offer:
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04075.jpg
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04074.jpg

BRIDE horn button ($10):
http://i777.photobucket.com/albums/yy52/voodoopeepz/for%20sale%2005-21-10/DSC04080.jpg


Any questions, offers, etc. You can PM me or reply on here, I'm on this thing all the time. I can do trades too, let me know what you have.

[silva.240]

i want to know if you have seat brackets for those?

i have corbeau cr1 seats with sparco sliders. - i need brackets for my s13.

let me know

[handinpants]

i gotta drive through there on my way back to la... how much psi does the actuator hold.... when does it begin to open? you used on your 20g, i am wondering when a 20g spools up at, i know your not selling one though

[rbsilvias13]

Willing to part out just the rotors?
Thanks.

[cln_S13]

Interested in clutch fan, do u have the entire assembly, would like some better pics if able. And what is the conditions of it. Call me at ur earliest convenience. 9098152311

[st280]

My bad didn't even get a chance to check this til now.

i want to know if you have seat brackets for those?

i have corbeau cr1 seats with sparco sliders. - i need brackets for my s13.

let me know

Yes I actually do. I'll have to find them. Shoot me a pm.

i gotta drive through there on my way back to la... how much psi does the actuator hold.... when does it begin to open? you used on your 20g, i am wondering when a 20g spools up at, i know your not selling one though

I actually have no idea on how much the actuator holds. The turbo is supposed to be good up to 40 psi. I had it set on 10lbs when I was running it, (definitely not the 20g's most efficient psi).

Willing to part out just the rotors?
Thanks.

Depends. For how much?

Interested in clutch fan, do u have the entire assembly, would like some better pics if able. And what is the conditions of it. Call me at ur earliest convenience. 9098152311

I'll give you a call tomorrow. I'm on my way out to Los Angeles.

[st280]

BUMP from the dead. Everything updated. And added parts.

Going to be at EDC this coming weekend. Will bring parts to Los Angeles!

[bruceguy]

u got pm. msglth

[s13coupe1988]

im interested in the clutch fan and the cluth disc, what brand is it? thanks

[st280]

im interested in the clutch fan and the cluth disc, what brand is it? thanks

F1 Stage 3 clutch. Hence the reason it's so cheap haha. Swapped it out thinking it was the reason my clutch was slipping. But was not. Haha.

[st280]

Last bump! Tomorrow's EDC! I can take anything down there. And all prices are negotiable just shoot me an offer!

[silva.240]

wow, i needed those brackets, didn't see the forum until edc was over. let me know if you still got those seat brackets

[s13coupe1988]

damm i really need that sr fan clutch did you bring it down with u?