*testing waters* 97 240sx 2jz/gt35r...

[branch757]

Please delete

[kaneda3]

give us a price range, yo

[ross.cottrill]

what cluster is that?

[dorkjoey240]

bump for tx guy badass.

[flawlessflo3190]

so worth it....glws

[branch757]

so worth it....glws

thx, people dont understand how much it cost to swap a 2jz into a s13/s14

[doublestitch180]

Price is resonable. But do you any documents on any of the work?
Dyno tune specs, engine rebuild, trans work etc. Anything any buyer would wanna see.

But from the pics, your swaps pretty clean. Just minor bodywork/paint then she's set!
GLWS

[s14tan]

Haters gonna hate man. Good luck with the sale.

Bump For Tx!

[AWDJosh]

i have 9000. body is.....ughhh well look at the over fenders and the tail lights and thats not all + needs paint, interior clean, swap is clean but not expensive...you dont have the V160 which makes supra swaps pricey....shit a 2jz long block is 1600 with auto tranny a r154 cost around 200-400, and swap itself is not hard nor expensive like stated. rims are nice though.

i see this sold at your asking price if shell was clean and had paint and actually had a V160 getrag as that 6spd is 3k-4k by itself.

lmk i live in florida my 9k cash is good and ill come to you.

[short_shift04]

nice looking car you got there, GLWS bud!!

[itsguyguy]

i have 9000.

(insert obvious flaws about his car here to lowball half of what hes asking)

lmk i live in florida my 9k cash is good and ill come to you.


To AWDJosh; you suck at life, kill yourself.

Bump for a fellow TX owner, 2J's do cost quite hefty to put them in right. If only you had this last year, I would consider getting this from you.

Instead, I got a S14 and decided to ask a friend to build it for me, went the RB26 route with a large single, and what you are asking is more then reasonable, everything for my car is already totaled over $26700 and I am not even finished with her yet; PLEASE DO NOT SELL HER FOR LESS THAN 17K!!!

That 35R must pull like a dream on a 50/60 roll!
:naughty::naughty::naughty::naughty::naughty:


Sell that cluster to me!!!

[Hxc_Nismo]

what cluster is that?

its the R33 Skyline Nismo cluster they go for around $600-$800

[AWDJosh]

To AWDJosh; you suck at life, kill yourself.

Bump for a fellow TX owner, 2J's do cost quite hefty to put them in right. If only you had this last year, I would consider getting this from you.

Instead, I got a S14 and decided to ask a friend to build it for me, went the RB26 route with a large single, and what you are asking is more then reasonable, everything for my car is already totaled over $26700 and I am not even finished with her yet; PLEASE DO NOT SELL HER FOR LESS THAN 17K!!!

That 35R must pull like a dream on a 50/60 roll!
:naughty::naughty::naughty::naughty::naughty:


Sell that cluster to me!!!

stfu and come talk to me when you can actually build a car yourself dumbfuck. dont fucking question my fucking offer its a cash offer, how about you take your fucking 26700 dollar POS and drift it into a wall dumbfuck.

2jzgte longblocks arent expensive, neither is his transmission in the car...its not like a rb26dett where cost is a huge problem.

[oldgovernor]

stfu and come talk to me when you can actually build a car yourself dumbfuck. dont fucking question my fucking offer its a cash offer, how about you take your fucking 26700 dollar POS and drift it into a wall dumbfuck.

2jzgte longblocks arent expensive, neither is his transmission in the car...its not like a rb26dett where cost is a huge problem.

haha, I barely post on this forum but I just saw this and had to. I hope you get banned snip!

I love your logic, it's soo terribly flawed; I've seen RB26dett longblocks go for less than 2JZGTE longblocks and both have the option to go with a cheaper 5speed manual (2JZGE 5spd for 2JZGTE, RB25det 5spd for RB26dett). So you're left with the cost of swapping it into the car, which all other things being equal, the basic fact that swapping a NISSAN motor into a NISSAN is going to be cheaper than a TOYOTA motor into a NISSAN is going to sway the 2JZ-GTE swap into being more expensive.


To OP:
nice car, glws, haters gonna hate

[babillaracing]

Glws and that price is about right

garrett 35 r $1300
aem $1700
koyo rad $350
2jzgte swap $1800
rebuild 2jzgte depends on what you put on $500-$4000
r154 tranny $400 - $600 (if you find them for $200 on working order I buy two ,hell I even give you $100 xtra for bring them to me)
rebuild kit for tranny $300-$700
gramlight 57s pro $2000-$2500
600cc injectors $350
Nismo r33 gtr gauge cluster $200-$400
hks dli $300-$350
walbro fuel pump $100
tein flex coilovers $1500
Shell $1500-$2500
wastegate $300-$600
blowoff $150-$250
intercooler $200-$1500
intercooler piping $75-$300
e-fans $100- $350
wiring harness $300-$550
shifter extension $350
driveshaft $250-$350
speedo and tach dakota boxes $150-$200
us spec water pump $150-$200
1jzgte flywheel $200-$400
7m or 1j clutch kit $300-$1500
slave clutch $50
braided clutch line $50
mounts ,you can go with ruckus mounts ,tech 2 or customs $200-$1500
misc shit $500-$1000
and this is from top of my head and if you don't think I know what I am talking about check my link http://zilvia.net/f/s-chassis/291527-my-s14-2jzgte-build.html
and all that is without including labor. I am pretty sure people can do a cheap swap but I guarantee that won't last too long.

[branch757]

I just wanna say thanks to everyone who has positive comments about my car. im not trying to over price my car. i paid a ton more, and im taking a huge hit selling it. im trying to buy a house and i need cash asap to pay closing and all the other hidden fees and things associated with buying a home. 18k is pretty firm. but im open for offers.

thanks again to all

[jamg]

To AWDJosh; you suck at life, kill yourself.

Bump for a fellow TX owner, 2J's do cost quite hefty to put them in right. If only you had this last year, I would consider getting this from you.

Instead, I got a S14 and decided to ask a friend to build it for me, went the RB26 route with a large single, and what you are asking is more then reasonable, everything for my car is already totaled over $26700 and I am not even finished with her yet; PLEASE DO NOT SELL HER FOR LESS THAN 17K!!!

That 35R must pull like a dream on a 50/60 roll!
:naughty::naughty::naughty::naughty::naughty:


Sell that cluster to me!!!
LOL so you spent $26,700 on a nissan 240sx. So let me guess, you think your car is worth $30,000?

why don't you kill yourself.

[AWDJosh]

LOL so you spent $26,700 on a nissan 240sx. So let me guess, you think your car is worth $30,000?

why don't you kill yourself.

this ^^^

but anyways im sorry for fucking part of your thread up...i made a cash offer...plain and simple. OHHHHFUCCKKKIINNNGGGWEELLLLLL if other people think its kind of low, you WILL NEVER GET WHAT YOU HAVE IN IT BACK OUT...thats what sucks about modding.

and lol at that summary of prices of parts....your a fucking joke, you must be like overnighting parts from japan like paul walker huh..

heres a guy selling a cleannnnn ass swapped 2jz swap with clean ass shell for almost half your price....

http://zilvia.net/f/cars-sale/322612-95-240sx-w-2jzgte-swap.html

once again im sorry.

=]

[babillaracing]

this ^^^

but anyways im sorry for fucking part of your thread up...i made a cash offer...plain and simple. OHHHHFUCCKKKIINNNGGGWEELLLLLL if other people think its kind of low, you WILL NEVER GET WHAT YOU HAVE IN IT BACK OUT...thats what sucks about modding.

and lol at that summary of prices of parts....your a fucking joke, you must be like overnighting parts from japan like paul walker huh..

heres a guy selling a cleannnnn ass swapped 2jz swap with clean ass shell for almost half your price....

http://zilvia.net/f/cars-sale/322612-95-240sx-w-2jzgte-swap.html

once again im sorry.

=]

I just got a new name for you " Hopes and Dreams "
where you get your parts from a parts fleamarket (Lol),knock off parts or worst stolen.
And the link you post is for a stock 2jzgte (non single one) .I guess you work with bicycles at your moms garage
hopefully you found a fool that is selling a single turbo ,standalone ,240 2jz swap for $9000 keep dreaming fool
and the offer still stand find me a good working r154 for $200 I give you $300 for it

[Syncade]

Youre all being a bit childish ruining this mans thread...

OP its understandable for your asking price.

AWDJosh its understandable you think it is overpriced. He probably paid to have the car built, so he naturally will add in those wrench costs. I dont think you should be bashed for your offer.

Lets be honest though, when modding cars, you get about 50% - 60% of what you put into PARTS. Wrench time means nothing in price.

The fact of the matter is, most (not all) 240 owners do their own work, so both sides of this argument are simply an opinion.

[Dazzla]

Bump for a SICK car.

Good luck OP

[Bwayan]

GLWS very nice swap.

[i8avet]

I've never understood the whole internet cuss contest. If you cant afford the product dont bother adding $.02... Because this is something u want but in reality you cant afford why hate? Thread started great. Sweet car, nice mod, then idiots show up. Sorry to you for the thread hater but there out there. glws

[BooStedS13SleePeR]

This is tight I'm buildin my 2j s13 as we speak and I already have like 6500 into the motor and internals. That's not the ecu,turbo,manifold,guages,cam gears,oil and water pump... so add up abouttt another 4 or 5k and that's like 11 or 12k ill have in my motor. So for all u people that don't understand how much rb26 and 2jz shit cost please don't speak cuz ur makin urself look like an idiot. Nooo offense to our diehard 240 guys but sr's,ka's and smaller rb's aren't even close to the price level it costs to build bigg jap motors. Opinions are like assholes everybodys got one lol. Glws on this these build are hard to sell period and that's all there is to it but fuck are they quick haha.now everyone can have fun again

[BooStedS13SleePeR]

Ohh and one more thing I'm not mentioning any names but if you knew anything u would know there absolutly is no reason to put a 4 thousand dollar tranny and a 200 mph one at that into a s body car its a waste of money and insane. stock 154's hold 700 horse fine and will do around a 160.

[itsguyguy]

LOL so you spent $26,700 on a nissan 240sx. So let me guess, you think your car is worth $30,000?

why don't you kill yourself.


If I were to price my car, I would say $18-22K if I had to sell it, mainly I won't because I don't think I will have to in the future because of a stable income from my career job.

Yes, I did spend $26,700 give or take, I don't have time to build cars, I just have time to drive and enjoy them. However much my friend charges me for labor is alright; he is an honest guy who is very knowledgeable about 240's, therefore:

go kill yourself.





BUMP this to the top, good luck with sale homie.

[harangatang]

Badass ass car!! I bet the torque is fun :D Whoever buys the car is going to have a real monstarrr.

And for Mr. 9k cash offer, if you think 18k is too much, don't post in the thread.... Pretty simple. It's a single'd 2j. And an original 97' kouki. Plus all the other misc BS. Come on..


GLWS!

[s14sport]

http://i161.photobucket.com/albums/t224/branch757/DSC00300.jpg

paint these rims flat black and this car will end up looking SICK!!!!!

[branch757]

yeah the tq is crazy fun...

http://i161.photobucket.com/albums/t224/branch757/jbranch.jpg

[itsguyguy]

stfu and come talk to me when you can actually build a car yourself dumbfuck. dont fucking question my fucking offer its a cash offer, how about you take your fucking 26700 dollar POS and drift it into a wall dumbfuck.

2jzgte longblocks arent expensive, neither is his transmission in the car...its not like a rb26dett where cost is a huge problem.


No time to build, only time enough to enjoy.
Funds isn't a problem for me anymore, so you can keep lowballing whoever you need to if you cannot afford to "build" one yourself.

Once again, you fail at life, kill yourself.


http://img.photobucket.com/albums/v499/itsguyguy/Shot-1.jpg

http://img.photobucket.com/albums/v499/itsguyguy/T6765.jpg

http://img.photobucket.com/albums/v499/itsguyguy/T67652-1.jpg

http://img.photobucket.com/albums/v499/itsguyguy/123456.jpg?t=1265792779

http://img.photobucket.com/albums/v499/itsguyguy/123454.jpg?t=1265792777

http://img.photobucket.com/albums/v499/itsguyguy/Sticky-1.jpg

http://img.photobucket.com/albums/v499/itsguyguy/240s-1.jpg

I'm sure everyone will agree with you that all of my parts are "POS".

Drifting isn't my style, I like to roll from 50-60.

http://img.photobucket.com/albums/v499/itsguyguy/oldandnew2.jpg

NOTE: Pictures were taken in February, both cars have obviously progressed since then, S14 is small issues away from the break in start.

[harangatang]

Nice parts. Seriously. Probs on the percision turbo. But make a build thread or something. Stop posting in this mans fs thread, it's clogged enough..

[s14tan]

It went from a for sale thread to a d*ck measuring contest lol.


Like I said Before OP. Good luck with the sale man.

Keep his thread on track.

[itsguyguy]

Bump this to the top; love those rims man!

[JuJubes]

Clean ass car GLWS! :fapfap:

[s13sr2oh]

sick car man love the wheels, glws