View Full Version : CA SR Partouuuutt
RacerX1
05-29-2010, 09:12 PM
I am selling everything except the dash & seats, I have S13 seats and a cracked dash that I will sell instead.
I would like to sell the motor & trans as a whole, but will sell parts according to interest.
I am willing to take partial or full trades for coilovers, 5speed swap parts, and quick release steering wheels if you have any.
S15 [GT2560R] turbo, seals going out -$250
Earls SS turbo lines -SOLD
Megan Exhaust Manifold -$80
Megan Elbow & Downpipe -SOLD
Nismo Motor Mounts -Sold with motor [installed]
FMIC -SOLD
Aluminum Radiator/fans -SOLD
HKS SSQV BOV -SOLD
ARP Headstuds - Sold with motor [installed]
OEM headgasket -Sold with motor [installed]
Autometer Boost Gauge -$30
Welded Diff -$100
Exedy Stage 2 Clutch -Sold with motor [installed]
Walboro 255 -Sold
Z32 fuel filter -$5
Brand new gaskets outside of the longblock
Brand new hoses all the way around
Im asking $1700 for the motor/trans without the turbo stuff, Ill give you the driveshaft & differential that came out of the SAME car in Japan as well. I have a gasket set that has all the gaskets that werent used on the engine and a new-ish mishimoto starter too. I dont have anywhere to keep the motor so if you want it then I can pull it & give it to you on the same day.
If you need anything not listed just let me know & Id be happy to oblige :)
http://i41.photobucket.com/albums/e283/sweetguyy7/For%20Sale/016.jpg
http://i41.photobucket.com/albums/e283/sweetguyy7/For%20Sale/015.jpg
http://i41.photobucket.com/albums/e283/sweetguyy7/For%20Sale/008.jpg
http://i41.photobucket.com/albums/e283/sweetguyy7/For%20Sale/007.jpg
http://i41.photobucket.com/albums/e283/sweetguyy7/For%20Sale/013.jpg
http://i41.photobucket.com/albums/e283/sweetguyy7/For%20Sale/014.jpg
RacerX1
05-30-2010, 11:16 AM
Bump........
Popscribble
05-30-2010, 11:38 AM
How much for the front mount set up
hollerjeet
05-30-2010, 01:40 PM
how much power are you making with your set up, if you dont mind me asking?
jarend
05-30-2010, 10:42 PM
Pm me a price on the alum rad and fans to 92122. Thanks
traxx07
05-30-2010, 10:44 PM
Post some prices!
How much for the turbo?
Team DET
05-30-2010, 10:49 PM
HKS SSQV how much shipped to 92410
twin240s
05-31-2010, 04:00 AM
how much for the radiator? downpipe?turbo? bov? fmic with piping? pm me or send me an email at
[email protected] thanks very interested!!!!
penco
05-31-2010, 05:27 AM
Are you willing to sell the main power steering screw that holds the line down to the pump? I can send you a pic of the part if you need it.
Aepharoh
05-31-2010, 10:34 AM
how much for the fans and what kind are they. text me the price 714 272 6666
RacerX1
05-31-2010, 11:20 AM
Sorry guys Ive been workin like a banshee, I will respond to all PMs & questions by the end of tonight.
vegasS12
05-31-2010, 12:06 PM
what brand are the pulleys
novita1021
05-31-2010, 04:53 PM
interested in the boost gauge and maybe the other one lol..how much for both?
!Zar!
05-31-2010, 05:40 PM
You're using stock injectors with that setup?
If not, which ones do you have, and how much are they?
RacerX1
05-31-2010, 07:13 PM
how much power are you making with your set up, if you dont mind me asking?
Not sure on the exact numbers but the turbo is rated up to 330hp with injectors/tune/Z32 maf, if I had to guess Id say 250ish?
RacerX1
05-31-2010, 07:32 PM
interested in the boost gauge and maybe the other one lol..how much for both?
The AFR gauge needs a new sensor, which are $70 from FR Sport. $120 for both.
You're using stock injectors with that setup?
If not, which ones do you have, and how much are they?
Stock injectors my friend.
what brand are the pulleys
Megan iirc, not the baller GReddy ones
Are you willing to sell the main power steering screw that holds the line down to the pump? I can send you a pic of the part if you need it.
Sorry no Id like to keep that together, I think I know which your talking about and I picked one up from a junkyard.
Those who asked for shipping quotes bare with me, never had to ship anything before so Im playing with the system & how much everything weighs etc. but Im getting it done asap.
Silver_s13_Redtop
05-31-2010, 11:17 PM
price for sr w/ trans and harness?
mau5trap
05-31-2010, 11:56 PM
pm'd reply
RacerX1
06-01-2010, 10:03 AM
Im pretty sure I responded to everyone, if not then holler at me & Ill get back to you.
sr20killer
06-01-2010, 04:07 PM
still got the welded diff?
how much and where are you located?
kushlivin
06-01-2010, 11:28 PM
price on downpipe?
rollout240
06-02-2010, 12:25 AM
how much for the fmic setup?
RacerX1
06-02-2010, 01:08 PM
price on downpipe?
$60
how much for the fmic setup?
pending sale on the fmic
jevus
06-02-2010, 01:31 PM
how much for s15 turbo
keada714
06-02-2010, 02:35 PM
how much for the front fender liners?
RacerX1
06-02-2010, 08:19 PM
how much for s15 turbo
$250, seals are going bad
how much for the front fender liners?
Dont have any :)
94vert
06-05-2010, 01:25 AM
price on ic piping?
PoorMans180SX
06-05-2010, 12:43 PM
PM'ed you.
murffy
06-05-2010, 02:01 PM
how much for turbo manifold?
RNGWLD
06-05-2010, 02:41 PM
How much for the motor mounts???? shipped to FL
RacerX1
06-09-2010, 02:41 PM
price on ic piping?
Pending sale...again.
PM'ed you.
PM returned
how much for turbo manifold?
Pending sale, but Im asking $80
How much for the motor mounts???? shipped to FL
Sorry I dont have anywhere to store the engine except in the car so for now the mounts stay with it, Ill let you know if that changes.
Zero_SX
06-10-2010, 04:24 PM
turbo lines picked up???
CorvettKilla
06-10-2010, 05:57 PM
Hey I have that power steer banjo bolt if you need it.
RacerX1
06-10-2010, 06:13 PM
turbo lines picked up???
$60 picked up
Vatche
06-11-2010, 02:11 AM
just some helpful advice, if you havent shipped anything before keep in mind that USPS(United States Post Office) has flat rate boxes.
the boxes are free. its priority mail which is guaranteed 2-3 business days delivery and its flat rate. so you can ship from 4.95-13.95 depending on the box you use. go to the post office and grab some boxes so you can figure out what fits in what.
sickS13 SR
06-11-2010, 02:31 PM
how much for the hot pipe only and Aluminum Radiator/fans
get back to me be for i spend my money haha.
tf_90s13
06-12-2010, 11:29 AM
do u have the ecu, im looking for a red label 62?
sr_24
06-13-2010, 09:21 AM
How much for the Pulleys????
email me at
[email protected]
sickS13 SR
06-13-2010, 10:57 AM
Bump............
andy_lopez
06-13-2010, 12:52 PM
how much for the whole motor?
Allmtoreg
06-13-2010, 01:07 PM
pm sent on mani and elbow
RacerX1
06-15-2010, 10:57 PM
just some helpful advice, if you havent shipped anything before keep in mind that USPS(United States Post Office) has flat rate boxes.
the boxes are free. its priority mail which is guaranteed 2-3 business days delivery and its flat rate. so you can ship from 4.95-13.95 depending on the box you use. go to the post office and grab some boxes so you can figure out what fits in what.
Thanks buddy, just figured that all out, did you go to the ZOMG BBQ?
how much for the hot pipe only and Aluminum Radiator/fans
get back to me be for i spend my money haha.
Hot pipe sold, fans/rad pending sale but Im asking $130 for both
do u have the ecu, im looking for a red label 62?
I do, $75 sound good?
How much for the Pulleys????
email me at
[email protected]
$50, wont let me email you for some reason
how much for the whole motor?
$2100 w/o turbo side stuff, I will include harness/ecu and all the stuff included in the first post-updated it today
pm sent on mani and elbow
responded
Sorry for the lagging, Im workin 3 jobs & start school on monday so shit has been real hectic. I am doin my best to respond to everyone as fast as possible so please be understanding! I updated the first post with some prices etc, if you dont like the price & want to make an offer then PM me & we can probably work something out
94spitfire91
07-31-2010, 12:36 PM
pm'ed you! answer when you get the chance thanks
RacerX1
07-31-2010, 06:07 PM
Ive been getting some PM's about some stuff, figured I could bump it up one more time.
racerx2k1
07-31-2010, 08:33 PM
Bump........
Sorry guys Ive been workin like a banshee, I will respond to all PMs & questions by the end of tonight.
Im pretty sure I responded to everyone, if not then holler at me & Ill get back to you.
PM'ed you.
Ive been getting some PM's about some stuff, figured I could bump it up one more time.
2 bump limit. You can start new thread in 3 days.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.