Lots of parts, mostly S13

[MrMcgarrett]

Got a bunch of parts sitting in my garage collecting dust lol
I also have like three coffee cans full of nuts, bolts, screws, clips etc. for S13/S14. Let me know which ones you need and I probably have them.

All parts are first come, first served!
Sorry, I won't hold anything.

370cc injectors-$60/$65 shipped
All four are in good condition.
http://i92.photobucket.com/albums/l5/MrMcgarrett/370injectors001.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/370injectors002.jpg

Chuki signals-$20/$25 shipped

http://i92.photobucket.com/albums/l5/MrMcgarrett/chukisignals-2.jpg

Hatch dome light cover-$10/$12 shipped
For sun roof models.
No cracks or chips.

http://i92.photobucket.com/albums/l5/MrMcgarrett/domelightcover-1.jpg

Mudflaps(F&R)-$SOLD
They are in good condition.
The fronts are a little bend, easy to straighten them out.

Mudflaps(R)-$20/$30 shipped
Rear pair also in good condition.

http://i92.photobucket.com/albums/l5/MrMcgarrett/mudflaps004.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/mudflaps005.jpg

Pignose lip-$20
It has cracks on the corners and some at the top in the middle.

http://i92.photobucket.com/albums/l5/MrMcgarrett/pignoselip001.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/pignoselip002.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/pignoselip003.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/pignoselip004.jpg

S13 clutch line-$15
S14 clutch line-$20
Both are in good condition.
Top-S13 Bottom-S14.

http://i92.photobucket.com/albums/l5/MrMcgarrett/clutchlines.jpg

S13 sidemarkers-$SOLD
All four are in great condition, no cracks.

SR ignitor-$SOLD

Zenki/Silvia clear signal lenses-$20/$25 shipped
They have a few small cracks.
One has some light over spray on it.

http://i92.photobucket.com/albums/l5/MrMcgarrett/zenkiturnsignals.jpg

HUD projectors-$15/$20 shipped each
Both are in good working condition.

http://i92.photobucket.com/albums/l5/MrMcgarrett/hudprojectors.jpg

Pop out DIN pocket-$15/$25 shipped
Inside needs some cleaning.

http://i92.photobucket.com/albums/l5/MrMcgarrett/dinpocket003.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/dinpocket004.jpg

15/16 BMC-$60/$70 shipped
Has all 3 fittings for a bolt on install.
http://i92.photobucket.com/albums/l5/MrMcgarrett/bm44bmc003-2.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/bm44bmc002-2.jpg

Z32 MAF-$80/$90 shipped
It is in good working condition.

http://i92.photobucket.com/albums/l5/MrMcgarrett/Z32maf024.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/Z32maf025.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/Z32maf026.jpg

Z32 rear uprights-$40/$55 shipped
All the bushing are in good condition.
You'll need to get some of the ball joint spacers(Nissan part #40173-33P00)

http://i92.photobucket.com/albums/l5/MrMcgarrett/Z32uprights001.jpg

06 350Z 6spd ECU-$100/$110 shipped
Has a slight dent in the cover but nothing inside is affected.

http://i92.photobucket.com/albums/l5/MrMcgarrett/350zecu-1.jpg

[wyang]

very interested in the
Pop out DIN pocket let me if you still have it...

[jserman]

very interested in the
Pop out DIN pocket let me if you still have it...

Me too... is that OEM???? will a drink fit in it???

[MrMcgarrett]

very interested in the
Pop out DIN pocket let me if you still have it...
I got a PM for it and I'm waiting on a reply.

Me too... is that OEM???? will a drink fit in it???
It is OEM Nissan but not from a 240 haha
Yes but it sits at an angle so I think only a small drink will fit.
I'll take a pic of it installed in my car.

EDIT: Here are a few pics of it installed:

http://i92.photobucket.com/albums/l5/MrMcgarrett/DINpocket006.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/DINpocket008.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/DINpocket009.jpg

You can see it hits the shifter in park.
I don't know if it will get in the way in a 5spd car.

[goqr25]

Do u have a phone number where i can reach u? Interested in sidemarkers

[sincity_sil80]

do you have the clips that the cargo cover suspends from for a fastback? the ones that clip into the hatch itself and the ones that clip into the speaker cover that hold the cargo cover. if so im interested. thx

[YdaSoL]

interested in the front chuki signal lights, side markers, and the hub projectors, are you selling both of them for one price? lmk how much for all?
pm me

[tre4s13]

lmk if those uprights are off a tt, using a q45 diff..... pm me

[swiftdrift]

Damn really want that lip but i'm beyond broke right now :/

bump for legit seller!

[nismoracingsx]

mudflaps for coupe or hatchback? Pm em, lmk, thanks

[MrMcgarrett]

do you have the clips that the cargo cover suspends from for a fastback? the ones that clip into the hatch itself and the ones that clip into the speaker cover that hold the cargo cover. if so im interested. thx
I don't have any of those.
They break every time you try to take them out.

interested in the front chuki signal lights, side markers, and the hub projectors, are you selling both of them for one price? lmk how much for all?
pm me
Sent you a PM.

lmk if those uprights are off a tt, using a q45 diff..... pm me
They are N/A uprights.

[Flash_RPS13]

lip still for sale??

[240sohc]

ill take all the sidemarkers of your hands, im local too.

[Geezy]

pay pal money sent for sidemarkers! mine mine mine!!

[driftnuts]

ill pay cash for the lip if you still have it and i can meet you half way!!!

[silvia1993]

I'll take the mud flaps and the lip if you still have them...if you do then Ill take them ASAP

[Flash_RPS13]

lip sold to me:w00t:

[inertia89240]

You still have those kouki turn signal lights avail?

[whats_a_sr20]

dude i know u come across alot of parts would u happen to have the piece of cartboard that goes in the trunk in between carpet and spare?

[mrsuave]

pop out din will be mine :)