big part out, top of the line

[joecar]

low mileage sr I put 20k on it in the past 5 years
$1400
uncut wire harness
ignitor chip and ecu
compression is
cylinder (1) 150 (2) 150 (3) 151 (4) 150
no turbo or injectors
motor
tranny
hks clutch with new disk and throw out bearing
metal head gasket
no turbo or injectors

top mount turbo kit less than 2 miles on setup, just 3 pulls on a dyno
turbonetics t3/t4
740cc tomei injector and fpr in fuel rail
cast top mount manifold dump tube and downpipe
38mm tial wategate with 8.7 psi spring
enthalpy rom tune for this setup
downpipe and dump tube are heat wrapped
$1450 shipped( individual prices below)


Mid mount intercooler custom end tanks made by Jeff from 240sxmotoring

$275 shipped

Koyo sr Radiator with perma cool electic fan

$250 shipped

brand new re-maufactured z32 30mm calipers with hawk pads and stainless lines

$325 shipped

bride Zeta 2 NEW knock off with seat rail
$250 prefer pick up

bride brix *real* reclineable passenger seat
its worn but good enough as a passenger seat with rail
$150 prefer pick up

t3/t4 turbonetics turbo .50 /.48 stage 2 exhaust wheel turbo with only 3 dyno pulls on it. I will include the lines as well.

$550 shipped

top mount manifold wastegate dump tube and downpipe
$300 shipped

Tial 38mm waste gate with 8.7 psi spring
$160 shipped

cusco motor mounts
$130 shipped

Nismo Tranny mount
$35 shipped

Five Lug front and rear
$325 shipped

sexy style front bumper and side skirts(small crack on side skirts front bumber is mint)
$350 prefer pick up

3" straight pipe exhaust with test pipe
$100 prefer pick up

Dang drifter moose knuckles
$170 shipped

real 180sx front markers/blinkers
$80 shipped

clear corner marker lights from frsport, i forgot the brand
$30 shipped

KTS coilovers with a spare front set of stance front springs
$550 shipped

Apexi EL boost gauge with dash mount pod
$85shipped

Omori mechanical oil temp gauge pretty much new, only had on car for 1 week
$78 shipped

aem uego wideband new only used on the dyno
$164 shipped

oil cooler kit with filter relocation
$236 shipped

Tomei 740cc injectors with tomei fpr in sr rail
$426 shipped

Z32 maf
$80 for just the MAF and pigtail shipped

I will sell the shell on stock suspension and 4 lug with title and spl parts outer tie rod ends with z32 inners, modern speed labs rucas, toe rods, and traction rods and walbro fuel pump. Fresh tubs up front , 6 point welded cage,and no rust thats what ive been fixing all winter. 30mm rear overfenders.

for $2,000

I can take off some of the suspension arms to help lower the price if someone wants it that way.


I will have more pics up tomorrow


http://i214.photobucket.com/albums/cc171/JoeTalmont/001-56.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/006-25.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/turbonetics3.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/turboneticstwo.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/015-2.jpg

[x240xdrifter]

interested in the injectors, pm me with more info plz

[udon!]

pics of the reclineable bride?

[OperationSr20]

I am assuming the wheels in the picture are 18"s, how much more drop could you get out of the KTS's? Would wanna get a nice drop and tuck on a 17"

[joecar]

heres a pic of the car when it had 17's years ago, I could have dropped it lower. But since then I put stance spring on the front coils because the front kts spring are really tall. The pic of the car with the white gullflames have the stance springs on the front and its a 17/18 staggered setup.

http://zilvia.net/f/vbpgimage.php?do=full&p=641&d=1147542728

[reds13se]

hey pm me details on the sr

[nathanong87]

really cool car! i'd love to see pix of the brix too

[joecar]

heres some of the parts I took off today.

coils are already pending

zeta II is pending


The Z32 brake calipers are BRAND NEW, I just picked up the other remanufacured one this morning. They still have the plugs in them!!!!

http://i214.photobucket.com/albums/cc171/JoeTalmont/015-5.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/016-4.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/014-5.jpg

calipers will inlude stell braided lines and hawk pads there brand NEW
http://i214.photobucket.com/albums/cc171/JoeTalmont/009-12.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/008-15.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/006-28.jpg

z32 maf comes with filter adapter
http://i214.photobucket.com/albums/cc171/JoeTalmont/004-38.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/003-46.jpg

brand new Dang drifter moose knuckles never driven on. They use s14 inners and outers
http://i214.photobucket.com/albums/cc171/JoeTalmont/002-56.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/001-57.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/005-31.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/013-3.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/012-4.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/011-6.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/017-3.jpg

under side of front bumber no cracks! base coat clear coat aztec red
http://i214.photobucket.com/albums/cc171/JoeTalmont/018-3.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/020-3.jpg

[skvngr]

pm'd for z32 brake package

[Chrisq0904]

Anything missing from the TIAL? And is it in working condition?

[joecar]

the tial is 100% perfect

coilovers are sold

[Chrisq0904]

SOLD. LOL pm me plz

[kyle_s13]

Let me know on the 5lug pm me.

[xsublimefrekx]

does the front mount come with piping?

[joecar]

i can do 385 shipped front mount with cold pipe apexi bov, couplers and t bolt clamps. all you would need is to use a greddy or project silvia hot pipe if your using a bottom mount. I paid 600 for this setup without the bov If you dont believe me call 240sxmotoring and ask the owner Jeff rica how much he charged joe from D-Faction to do his mid mount setup. It was a blank core with custom end tanks

[Gsxrrider7500]

Pm'd about injectors

[nathanong87]

sad to see this car getting parted =(

i really really really really really am tempted to make a road trip from MD for that brix lmao!

[SWAT Team S14]

PM sent about the brix....

[joecar]

the entire motorset, injectors turbo mounts everything is pending until monday night. I will let you know if it falls through.

[Gsxrrider7500]

boo there goes my chance of getting into racewars :D

[jk26]

Would the oil cooler and filter relocation work on an rb25?? Also what brand is it??

[joecar]

responded to all the pm's, sorry for the delay its been a crazy week


knuckles are sold***

injectors are sold***

[silvertn350]

$150 shipped for the wideband? pm me

[coupekidz13]

Pictures of 3" exhaust ? Will it fit my coupe? Pm me

[Pipit_Slapper]

Bump for clean CAR!!!

[silvious]

interested in 5lug pm me

[joecar]

5 lug is sold
aem uego sold
apexi boost gauge sold
exhaust sold
bride brix is pending

[joecar]

motor and trans sold
sexy style front and sides sold
enthalpy ecu sold

[IIIXziuR]

darn this was such a cool car.
I remember seeing it years ago.
Best of luck with future endeavors man

[PauloMKV]

hey im really interested in ur coilovers.
email me [email protected]

[joecar]

hey im really interested in ur coilovers.
email me [email protected]


coils are long gone


nismo buttttttt plug 30 shipped

http://i214.photobucket.com/albums/cc171/JoeTalmont/005-32.jpg


odyssesy dry cell battery 90 shipped

http://i214.photobucket.com/albums/cc171/JoeTalmont/002-60.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/003-49.jpg

[Nicelyphe]

Im interested int he Nismo tranny mount? You still have? How many miles on it?

[jk26]

Does the oil cooler and filter relocation work on rb25, also what brand is it??

[handinpants]

i wanna see the pics of the real 180sx front markers/blinkers
$80 shipped, cause i think i will buy them, and the side clear marker lights too, but i wanna make sure they are the correct things, i have paypal ready to go
also interested in that piece of pipe that comes from your turbo to your z32 maf with the couplers, pm me

[joecar]

all lights are sold
oil cooler sold
turbo kit is gone
ecu is gone



still getting way to many pm's about the coilovers they are LONG GONE



heres pics of the cusco mounts and nismo tranny mount

160 shipped for the set


http://i214.photobucket.com/albums/cc171/JoeTalmont/001-61.jpg

http://i214.photobucket.com/albums/cc171/JoeTalmont/002-61.jpg

[onevia drift]

read through thread, didnt see if seats were sold? interested in both

[Nicelyphe]

Im interested in the Nismo tranny mount, sorry i do not need the engine mounts, would you be willing to sell sperate? How much shipped to 18103? How many miles on it?

[joecar]

Im interested in the Nismo tranny mount, sorry i do not need the engine mounts, would you be willing to sell sperate? How much shipped to 18103? How many miles on it?


Sorry trans mount is sold

[w.tungsten]

Joe I want that sexy style kit. I'll send you a text.

[WholeGrainS13]

man im glad i got them coils from you when i did. sorry fellas

[drift_s13]

bride Zeta 2 NEW knock off with seat rail

Sold to me!

Buy his stuff!!