neo_rambo
05-24-2010, 11:50 PM
PLEASE EMAIL ME IF YOU HAVE ANY QUESTIONS OR OFFERS: [email protected] I will respond quicker if you email me instead of pm me
JDM Nissan S13 180SX Kouki Type X Tail lights set- (NEW) - $490
Genuine Nissan Japanese domestic market factory replacement part. I bought these from Courtesy Nissan in Richardson Silvia fastback model JDM Tail Light Kit - 180SX/200SX :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com (http://www.courtesyparts.com/silvia-fastback-model-jdm-tail-light-kit-180sx/200sx-p-227648.html). I sold the car before I could put them on. My loss your Gain. Paid 600 plus tax plus I had to wait a month to get it.
The Japanese market 180SX Kouki tail light assembly for your 1989-1994 240SX fastback. The lower panel requires painting and some wiring modifications are necessary. Please note that this kit is for the fastback model only.
* All parts listed below included in the Tail Lamp Kit: Tail Light Assembly / Right Rear
* Tail Light Assembly / Left Rear
* Tail Light Assembly / Center
* Panel / Lower
* Lock Assembly (includes keys)
Didn't want to open all of the boxes cause they are still sealed. NO TRADES PLEASE.
http://www.pixelcarver.com/G35-Forsale/SDC13790.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13791.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13793.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13794.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13796.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13797.JPG
ACT Clutch Release Bearing / Throwout Bearing for SR20DET - (New) - $25
These ACT throwout bearings are the same high-quality bearings included in your ACT clutch kits. This is available separately for every kit made by Advanced Clutch Technology and are perfect for replacing lost or damaged bearings. Selling new for 50 bux shipped ebay. Half off Brand new still in packaging. Don't need I sold car.
http://www.pixelcarver.com/G35-Forsale/SDC13756.JPG
Rare - Blitz 52mm Boost Gauge - Mechanical (Used) - $50
http://www.pixelcarver.com/G35-Forsale/SDC13770.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13768.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13771.JPG
SR20det Down Pipe - (NEW) - $45
I have a Brand NEW Aftermarket Downpipe for the S13/S14/S15 Sr20det cars. I sold my car and don't need this anymore.
http://www.pixelcarver.com/G35-Forsale/SDC13785.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13786.JPG
Project Kics wheel spacers 4x114.3 240sx 25mm (Used) - $100
I used these on my old 240sx I don't know if they fit anything else as long as your lug pattern is 4.114.3 you should be ok.
Project Kics wheel spacers are high quality spacers from Japan. Wheel studs come pre-pressed so no additional work is needed. Don't mess with hammering out wheel studs and installing longer ones, when you go save time with Project Kics.
* 4 lug, 4 x114.3mm
* 25mm thickness
* 12x1.25mm Stud
* 10mm and 15mm Spacers will require space on the wheels for the original studs. 20mm and up might need space, but it depends on the original studs length. ( If it has been swapped out for extended studs, etc.)
* The pictures show a 15mm spacer and how the original stud sticks out.
* Notice how the hub face of the wheel has extra holes for the original studs to clear. Forgot to include picture of the socket that tightens the lugs. I have it in the box.
http://www.pixelcarver.com/G35-Forsale/SDC13759.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13760.JPG
Greddy Turbo Outlet Elbow - SR20DET (S13 S14 S15) - (NEW) - $200
I am selling a new Greddy Turbo outlet for the following. Brand NEW Have box and all. Never Used. Better construction then the cheap ebay ones. Bought new from projectsilvia.com for 248 plus tax.My loss your gain Reason for selling is because I sold my 240sx
* PS13 / S14 / S15 / RPS13
* Year: 1989+
* Engine:SR20DET
# 70mm
# Stainless Steel
#For Greddy TZ turbos or stock turbo
States as fit for S14, but known to fit on S13 as well.
http://www.pixelcarver.com/G35-Forsale/SDC13778.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13779.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13780.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13781.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13782.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13783.JPG
Auto Meter 4337 Ultra-Lite Water Temperature Guage (NEW) - $48
Brand New Autometer 4337 Water Temperature Gauge Silver Face. Sold Project Car don't need anymore. New it's $58 save 10 bux and pick it up.
* Includes 1/8 NPT sender, 3/8 and ½ NPT adapter fittings
* Size of the short sweep electrical water temperature gauge is 2-1/16 (52.4mm)
* Ultra-Lite short sweep electrical water temperature gauge reads from 100 degree to 250 degree F
* Electric sending units keep hazardous fluids in the engine
* Air-Core movement with silver dial face, orange pointer, silver bezel, and black lettering and increments
http://www.pixelcarver.com/G35-Forsale/SDC13789.JPG
JDM Nissan S13 180SX Kouki Type X Tail lights set- (NEW) - $490
Genuine Nissan Japanese domestic market factory replacement part. I bought these from Courtesy Nissan in Richardson Silvia fastback model JDM Tail Light Kit - 180SX/200SX :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com (http://www.courtesyparts.com/silvia-fastback-model-jdm-tail-light-kit-180sx/200sx-p-227648.html). I sold the car before I could put them on. My loss your Gain. Paid 600 plus tax plus I had to wait a month to get it.
The Japanese market 180SX Kouki tail light assembly for your 1989-1994 240SX fastback. The lower panel requires painting and some wiring modifications are necessary. Please note that this kit is for the fastback model only.
* All parts listed below included in the Tail Lamp Kit: Tail Light Assembly / Right Rear
* Tail Light Assembly / Left Rear
* Tail Light Assembly / Center
* Panel / Lower
* Lock Assembly (includes keys)
Didn't want to open all of the boxes cause they are still sealed. NO TRADES PLEASE.
http://www.pixelcarver.com/G35-Forsale/SDC13790.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13791.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13793.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13794.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13796.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13797.JPG
ACT Clutch Release Bearing / Throwout Bearing for SR20DET - (New) - $25
These ACT throwout bearings are the same high-quality bearings included in your ACT clutch kits. This is available separately for every kit made by Advanced Clutch Technology and are perfect for replacing lost or damaged bearings. Selling new for 50 bux shipped ebay. Half off Brand new still in packaging. Don't need I sold car.
http://www.pixelcarver.com/G35-Forsale/SDC13756.JPG
Rare - Blitz 52mm Boost Gauge - Mechanical (Used) - $50
http://www.pixelcarver.com/G35-Forsale/SDC13770.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13768.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13771.JPG
SR20det Down Pipe - (NEW) - $45
I have a Brand NEW Aftermarket Downpipe for the S13/S14/S15 Sr20det cars. I sold my car and don't need this anymore.
http://www.pixelcarver.com/G35-Forsale/SDC13785.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13786.JPG
Project Kics wheel spacers 4x114.3 240sx 25mm (Used) - $100
I used these on my old 240sx I don't know if they fit anything else as long as your lug pattern is 4.114.3 you should be ok.
Project Kics wheel spacers are high quality spacers from Japan. Wheel studs come pre-pressed so no additional work is needed. Don't mess with hammering out wheel studs and installing longer ones, when you go save time with Project Kics.
* 4 lug, 4 x114.3mm
* 25mm thickness
* 12x1.25mm Stud
* 10mm and 15mm Spacers will require space on the wheels for the original studs. 20mm and up might need space, but it depends on the original studs length. ( If it has been swapped out for extended studs, etc.)
* The pictures show a 15mm spacer and how the original stud sticks out.
* Notice how the hub face of the wheel has extra holes for the original studs to clear. Forgot to include picture of the socket that tightens the lugs. I have it in the box.
http://www.pixelcarver.com/G35-Forsale/SDC13759.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13760.JPG
Greddy Turbo Outlet Elbow - SR20DET (S13 S14 S15) - (NEW) - $200
I am selling a new Greddy Turbo outlet for the following. Brand NEW Have box and all. Never Used. Better construction then the cheap ebay ones. Bought new from projectsilvia.com for 248 plus tax.My loss your gain Reason for selling is because I sold my 240sx
* PS13 / S14 / S15 / RPS13
* Year: 1989+
* Engine:SR20DET
# 70mm
# Stainless Steel
#For Greddy TZ turbos or stock turbo
States as fit for S14, but known to fit on S13 as well.
http://www.pixelcarver.com/G35-Forsale/SDC13778.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13779.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13780.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13781.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13782.JPG
http://www.pixelcarver.com/G35-Forsale/SDC13783.JPG
Auto Meter 4337 Ultra-Lite Water Temperature Guage (NEW) - $48
Brand New Autometer 4337 Water Temperature Gauge Silver Face. Sold Project Car don't need anymore. New it's $58 save 10 bux and pick it up.
* Includes 1/8 NPT sender, 3/8 and ½ NPT adapter fittings
* Size of the short sweep electrical water temperature gauge is 2-1/16 (52.4mm)
* Ultra-Lite short sweep electrical water temperature gauge reads from 100 degree to 250 degree F
* Electric sending units keep hazardous fluids in the engine
* Air-Core movement with silver dial face, orange pointer, silver bezel, and black lettering and increments
http://www.pixelcarver.com/G35-Forsale/SDC13789.JPG