View Full Version : rear brakes smoking
dogdrinkincoffee
05-19-2010, 07:05 PM
I just changed my rear left brake pads(hawks HP+ on brembo blanks) now they make smoke and they smell like overheated brake pads. Any Ideas how to fix this problem
Sileighty_85
05-19-2010, 07:39 PM
ummmmm verify the calipers are seized and replace them.
Maybe the Ebrake is locked up.
SinGarage
05-21-2010, 12:17 PM
Wait...you just changed the rear left brakes? What about the rear right?
aznpoopy
05-21-2010, 12:21 PM
mech fail: caliper seize or e-brake mech fail
or
install fail: didn't reset piston position sufficiently
dogdrinkincoffee
05-24-2010, 02:28 AM
umm i did reset the piston all the way i replaced my brake pads all around only thing i did different is the left rear i took it off because my bleeder stripped. i got it off replaced it and took it for a run and started to smoke and smell
Slammed Assassin
05-24-2010, 03:25 AM
since you took out the bleeder. did u make sure there was no air in the system?
dogdrinkincoffee
05-24-2010, 03:30 AM
i bled my brakes
Hxc_Nismo
05-24-2010, 03:46 AM
calipes sound like there siezed
dogdrinkincoffee
05-25-2010, 01:54 AM
nvm i fixed it but another problem when i push my car on the mountain pass my brakes get mushy and they smell like if their over heated should i be using dot 4 brake fluid for the HP+ pads
murda-c
05-25-2010, 02:05 AM
i'd get dot 5.1 fluid.
stock brakes can easily overheat if it's a fast course. I did it with my hp+ pads and i have 5.1 fluid and stainless lines.
Really you're gonna wanna upgrade, stock 240sx brakes are shitty.
shiftdrift
05-25-2010, 03:04 AM
Really you're gonna wanna upgrade, stock 240sx brakes are shitty.
this, my friends stock brakes overheat on runs too.
dogdrinkincoffee
05-26-2010, 01:43 AM
i herd dot 5 corrodes your brake lines
soreballz
05-26-2010, 11:41 AM
i herd dot 5 corrodes your brake lines
Dot 5 is bad. Dot 5.1 is good.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.