PDA

View Full Version : OK 1997 ls14


Gjohnson7
05-14-2010, 05:53 PM
Ok, well I'm taking a new job that will require little more travel and a lot more packing my 3 kids around, so after a long talk with the wife I am considering trading my newly swapped S14.
Agian, no lowballs. I"m still just considering parting with her, I would really love to complete this project.
Also, she's never seen a dyno but should be putting down around 350 to 375 hp.

Email: [email protected]

Location: Broken Arrow, OK
Price: $10,500 firm.
Title: The car has a Clear, Green Oklahoma although I do see on the title that there was some sort of loss on the vehicle around 2005.

Would consider trading for 4 door cars. ie: STI, IS300, CTS-V, ES300 etc...


1997 240sx with around 160k on the chassis,
2005 L33 with 55k miles (all aluminum 5.3L with LS6 heads. Flat top pistons and higher compression)
2001 T56 (6 speed)
2004 GTO PCM
2001 LS1 intake
LS6 Cam and springs
96 Q45 LSD 3.54 gears
custom drive shaft
custom engine mounts
custom tranny mounts
c5 corvette Manifolds, 3" y-pipe, no cats, Thrust muffler
2005 G35 17" wheels

Swap was just completed in December and has about 3000 miles on it right now. Sorry about the dirty pics, I still haven't had time to detail her.


I still have a few things to complete.
Have Z32 calipers to put on the car.
Coilovers or springs
Then she's off to paint and body work.
Oh, and A/C lines. I already have the Compressor and brackets.

http://img168.imageshack.us/img168/7720/dsc04255t.th.jpg (http://img168.imageshack.us/i/dsc04255t.jpg/)

http://img201.imageshack.us/img201/2595/dsc04254w.th.jpg (http://img201.imageshack.us/i/dsc04254w.jpg/)

http://img140.imageshack.us/img140/5530/dsc04356w.th.jpg (http://img140.imageshack.us/i/dsc04356w.jpg/)

http://img100.imageshack.us/img100/5560/dsc04357d.th.jpg (http://img100.imageshack.us/i/dsc04357d.jpg/)

http://img230.imageshack.us/img230/9274/dsc04358bg.th.jpg (http://img230.imageshack.us/i/dsc04358bg.jpg/)

http://img405.imageshack.us/img405/283/dsc04359re.th.jpg (http://img405.imageshack.us/i/dsc04359re.jpg/)

http://img190.imageshack.us/img190/7402/dsc04355z.th.jpg (http://img190.imageshack.us/i/dsc04355z.jpg/)

http://img217.imageshack.us/img217/2047/dsc04317b.th.jpg (http://img217.imageshack.us/i/dsc04317b.jpg/)

http://img188.imageshack.us/img188/2581/dsc04366h.th.jpg (http://img188.imageshack.us/i/dsc04366h.jpg/)

http://img412.imageshack.us/img412/985/dsc04367a.th.jpg (http://img412.imageshack.us/i/dsc04367a.jpg/)

Gjohnson7
06-03-2010, 06:20 PM
Bump!!! Still Available

Syncade
06-04-2010, 06:43 AM
Very good deal. Free bump.

sirfallsalot243
06-04-2010, 06:49 AM
Keeeep it! Throw it in the garage for a year, rock a $1000 4 door civic, and finish her up when the time is right!

Ill never kick myself so hard as I do for abandoning projects halfway through. At the very least, finish it and sell it for the 14-15k it'd be worth.

96rbs14
06-04-2010, 03:10 PM
i know you want a 4dr car but i have a fully finished s14 rb25 car thats very dependable and can drive anywhere with no problem, i live in tn and as of right now typing this reply in daytona beach florida and drove the rb down to cruise the strip and save on gas.... i would love to finish your ls1 project... my car is really clean and no short cuts were takin high dollar timer, and boost controller and guages. please pm me what you think or reply to [email protected]
thank you for taking your time reading my post

Gjohnson7
06-06-2010, 12:30 PM
Time will tell at this point. If it sells for my asking price then that's, that. If it doesn't sell then I will finish her up and hopefully hold on to her for a while.

Keeeep it! Throw it in the garage for a year, rock a $1000 4 door civic, and finish her up when the time is right!

Ill never kick myself so hard as I do for abandoning projects halfway through. At the very least, finish it and sell it for the 14-15k it'd be worth.

Pm sent!

i know you want a 4dr car but i have a fully finished s14 rb25 car thats very dependable and can drive anywhere with no problem, i live in tn and as of right now typing this reply in daytona beach florida and drove the rb down to cruise the strip and save on gas.... i would love to finish your ls1 project... my car is really clean and no short cuts were takin high dollar timer, and boost controller and guages. please pm me what you think or reply to [email protected]
thank you for taking your time reading my post

simonsays
06-11-2010, 02:07 AM
i know this question has nothing to do with your sale but i'm very curious on where you bought the mounting kit for your swap.

Gjohnson7
06-12-2010, 08:16 PM
It has been a while but I used this kit and welded the t shaped mounts to 1/4 steel so that you could easily remove the engine.

CAR SHOP 2350 LS1 LS6 GEN 3 UNIVERSAL MOTOR MOUNTS STREET ROD $89.95 BUY ONLINE (http://carshop.carshopinc.com/product_info.php/products_id/86960/2350)

I made my own tranny mount out of 1/4 inch steel as well.

quickline23
07-04-2010, 07:06 PM
u still have this?

Gjohnson7
07-04-2010, 08:43 PM
Yeah, I still have her. Been getting things lined up to install AC.

quickline23
07-05-2010, 05:13 AM
does it need any work done to it? does it come with any extras? would u be willing to ship it? any rust?

Gjohnson7
07-05-2010, 07:16 AM
It still needs some cosmetic work. I've been working on the rear quarter panel and I also have another rear bumper to replace the broken one. As you can see from the pics the paint has seen better days. Also, I have noticed that under hard acceleration the clutch is starting to slip some, so the plans are to replace the clutch with a LS6 unit for around $350. It comes with front and rear Z32 calipers, that haven't been installed yet. And all A/C components to getting the system running, just need to have the lines made.
I could ship, but you would have to work out the details.
I found a couple of spots around around my rear window where paint had chipped off and a little surface rust had started, but those spots have been sanded down and shot with primer. No, big rust issues. Oklahoma is usually pretty hot and dry, so that's not really a big problem here or atleast it hasn't been on any of the 30+ cars that I've owned.

quickline23
07-05-2010, 07:47 AM
Ok sounds good I'm def interested if I get rid of my wrx soon I'll be in contact

RhdRicheeee
07-05-2010, 11:03 AM
nice car good luck