FS: s14.5 RHD sr20det CHEAP!!!!

[NismoFan]

Hey guys selling my S14.5 right hand drive. please read everything before you ask questions and keep negative comments to yourself.

mods:

engine:
SR20det Black top(powder coated)

part # description
cr5536503d eagle rods
cb1629p clevite rod bearings
ms201sp clevite main bearings
k556m865 wiseco .020 pistons
100-8233 valve guides
******** crank turned 10 over 10 under
arp2025402 block studs (arp)
arp1024701 head studs (arp)
*********** bored .020 and honed
********** valve job
********* resurface

was told these were the mods done to the engine when i bought however was never given the paperwork.




Greddy intake manifold(knockoff)(powder coated)
head ported and polished
xs power turbo manifold
tomei camshafts
3" straight pipe from turbo back
huge fmic(pipes powder coated)
new alternator
new coil packs(+ 2 extra)
new belts
Aftermarket clutch(forgot the brand)
hks bov
turbo spins like brand new
intake(powder coated)
Strut bar

Exterior:7/10
molded body kit
strawberry face front bumper
s15 front fenders
carbon fiber hood
s15 headlights with hid conversion
rear window spoiler
cf wrapped gas tank lid

Interior:9/10

custom interior with Silvia embroidering
brand new black carpet and floor mats
auto climate control assy in Celsius
guage cluster from japan (km/hr)
4 pod gauge cluster on rt a pillar
battery relocated to trunk( in a battery box)
tomei short shifter(have old shifter too if you want it)
nismo shifter


Electronics:
Autometer(Boost,Oil temp,Volts,A/F wide-band)
Apexi neo S-AFC
aftermarket head unit
aftermarket speakers
relocated widow switches to middle console (b/c of the rhd conversion)
viper alarm(not installed)



Footwork:
300zx Hubs
300zx brakes(calipers painted red)

300zx rear diff
350z rims and tires( brand new tires)
lowered on springs

the bad:
some electronics dont work
missing radio bezel
engine is making some noise
no e-brake cable
passenger hid bulb broke(ballast should be fine)
probably needs new throwout bearing in the tranny(makes some noise)


this car has alot of time and money invested into it and I no longer want to mess with it so here it is. o yeah i have clean title in hand
Price: $7500 (firm-ish)

you can: pm, call or txt, me
757-434-1470 Noel





http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03908.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03910.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03914.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03916.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03894.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03903.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03904.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03905.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03922.jpg

http://i369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/DSC03982.jpg



more pics at:
240sx pictures by xXhappyfaceXx - Photobucket (http://s369.photobucket.com/albums/oo133/xXhappyfaceXx/240sx/)

[xSRsil80x]

why would you do that....only 7.5k are you sure?

[NismoFan]

cuz i really wanna sell it fast, bump numba 1

[titangts]

if this thing had a stock front end. with stock interior, i would be all over it! but the way it is. just doesn't float my boat at all.

[SupaDoopa]

Read the bads and it explains the reason for the price. Knock off that body kit from being molded into the body and you'll sell that in a heartbeat.

That color is sick.

[240tuned91]

you can pull the body work get some wheels and lower it and your in businness no engine bay shots?

[silvertn350]

interested in any trades?

[sirfallsalot243]

What does "engine makes some noise" mean? For all we know, that could be rod knock.

[bkuhl]

^^ more than likely that's what's wrong. don't forget the ToB is "making some noise" as well.

[NismoFan]

you can pull the body work get some wheels and lower it and your in businness no engine bay shots?

engine bay shots are added to the photobucket

What does "engine makes some noise" mean? For all we know, that could be rod knock.

for all i know thats what it is. i have only had one other car rod knock on me and it didnt really sound like whats this is doing but who knows. right now it will sit in my driveway until someone who wants to buy it can drive it.

[bkuhl]

you said "some electronics don't work"


what electronics don't work???

[NismoFan]

sunroof and windshield wipers

[NismoFan]

drove it today and didnt hear any noise from the engine but that throwout bearing is sure making a racket

[kaneda3]

what turbo?

what clutch?

was it ever tuned?

you near any reputable shops?

[NismoFan]

stock turbo
i dont remember what aftermarket clutch was in there
i street tuned it so basically a really rough tune
and yes there are a few reputable shops near my place

[NismoFan]

bump it up

[WizardBlack]

It's funny to see decently modified SR20 swaps that all of the sudden are sitting in the F/S section and the owner claims mechanical ignorance of what knock sounds like. You wouldn't sell a car for less money with potentially bad bearings if you could have it looked at by someone and confirmed it is something else. Please post a video of the "noise".

[SxMachine]

cr5536503d eagle rods
cb1629p clevite rod bearings
ms201sp clevite main bearings
k556m865 wiseco .020 pistons
100-8233 valve guides
******** crank turned 10 over 10 under
arp2025402 block studs (arp)
arp1024701 head studs (arp)
*********** bored .020 and honed
********** valve job
********* resurface

was told these were the mods done to the engine when i bought however was never given the paperwork

So you have no idea on whether or not this motor is built. Can you at least find the shop that did the work from the previous owner.

[NismoFan]

s14.5 walk around on Vimeo (http://vimeo.com/12473254)

[GabeS14]

So you have no idea on whether or not this motor is built. Can you at least find the shop that did the work from the previous owner.

s14.5 walk around on Vimeo (http://vimeo.com/12473254)

the engine does make a strange, noise.unless its just a weird effect because the camera is so close..but def didnt sound normal
i would find out what shop did the work and confirm the mods with them.

[polo3men2]

did you custom the interior or you got it like that?
toooo flashy yet not what a s14 is to be. whats going on with these cars, people are mutilating them ;(...

[thenooblet]

^^they are turning into honduh's

[NismoFan]

bought it with the interior like that

[dookiedang]

HOLY SHIT U HAVE 4 GAUGE PODS!!!! how the fuck can you see so high?? LOL but its priced pretty nicely. glws

[Xclusive_racer]

its dosnt sound healthy, my last motor did the samething so i took the valve cover off and then bleed the lifters, it still mad the same noise after that so then i took the head off and it ended up that my valve hit my number 2 piston:( guess what? MORE MONEY INTO MY MOTOR! so i bought new pistons and went cp, then sense the 1 valve was bent bought bc set including springs and retainers! but either way it was a pain in the ass so you might wanna just take some time pull the valve cover off and look at it. you car is honestly too high priced for a motor with problems. Anybody can claim that they have this and that in the motor but pictures tell another story. either way nice looking car but just needs some work. GLWS

[NismoFan]

i done messing with this thing honestly, 7500 obo

[NismoFan]

7500 obo

s14.5 walk around on Vimeo (http://vimeo.com/12473254)

[racerx2k1]

cuz i really wanna sell it fast, bump numba 1

drove it today and didnt hear any noise from the engine but that throwout bearing is sure making a racket

bump it up

s14.5 walk around on Vimeo (http://vimeo.com/12473254)

i done messing with this thing honestly, 7500 obo

7500 obo

s14.5 walk around on Vimeo (http://vimeo.com/12473254)

2 bump limit. You can start new thread in 3 days.