horsepower limit on stock kade fuel injectors

[wild_bill240]

i have a 92 dual cam and im staying n/a for now untill i get better at drifting, i have headers, 2 and a quarter catless exhaust, and a custom built step intake 2 inch off the maf and 3 inch into the manifold and the whole egr system is gone, and im about to get a whole cometic head gasket set and rebuild most of the motor, im hoping to get to 175 whp but i would like a little bit more, im planning on buying a jim wolf computer than runs n/a and turbo maps, i was wondering for n/a if i should upgrade the fuel injectors to get a the most power possible or if it would just be a waste of money without a turbo, and i was wondering if anyone has a z32 maf for sale to get better airflow, any suggestions??

[project-D180]

wow..no reply's eh..well imma see if i can help out..u can use 370cc sr injectors/300zx..i think 190 is pushin the stock injectors to its limits but im not quite sure (double check it).and for maf u can use z32/q45 (n62 or n60)will work fine.make sure u get a wiring diagram to wire up your signal,ground,power wires up correctly..which isnt hard.one thing i will tell u since u wana be n/a is get rid of the stock intake mani.either get a custom make your own with a plenum or buy one,u will definitly notice a difference in how it revs n reacts...on my n/a build i made 181 on jus high comp pistons n 264 cams wit a shit tune and xcessive intake mani n stock injectors..oh u can use the injectors from the newer kade (altima00-04,frontier98)check advance auto n auto zone online..

[project-D180]

hope that helps