PDA

View Full Version : Anyone know about truck z24 engines?


burnz24
07-07-2003, 12:09 AM
Does anyone know anything about z24 truck engines? I seen a guy driving a 1987 pick-up with a z24 4 cyl. engine, and it hauls balls! I think he runs like 13's. I have the same truck and was wondering if anyone knew what things I can do to adda few HP to my puppy.

Bill Roberts
07-07-2003, 06:15 AM
I'd ask him what he did..

First of all, a 4 cyl 8 valve 8 sparkplug engine with 103 horsepower pushing an aerodynamically challenged truck ain't gonna happen without some super mods.

Even with boring, port and polish, intake , headers, exhaust, and a 4 barrel with manifold...you are only up to like 180hP and you will need close to 340 at the rear wheels to get that. It is not a high rever, 4800 RPM is the useable ceiling. Touquey it is but stock only a shade over 130 ft lbs.

You should ask him for an extensive list of mods and come back and report it to us. I suppose he has some sort of nitros.

The engine is a good low end torquer but not a high rever. Mid 13's seems rather impossible unless something major league has been done.

I had the 84 king cab with 4X4 and mine took almost a min to go from 70 to 95.

Tidony
07-07-2003, 11:42 PM
I don't know much about the z24 engine but I know who ever said you would need 340 horse power to push a truck that weighs about two thousand pounds to run thirteens is horribly mistaken, considering a stock ls1 powered z28 ss will run a 12.98 in the quater! think about power to weight ratio there! I've seen some modded z24 nissans and 22r toyotas run thirteens and not be putting anywhere near 300 to the ground.

Bill Roberts
07-08-2003, 06:04 AM
A base model hardbody in 1995 weighs 2805 and is aerodynamic as a sheet of plywood.




2000 LBS?


Are you talking 1/8th mile?

legendarysnail
07-08-2003, 12:05 PM
Was it an engine for '88 - '94? Those years had the 3.1L V6 in the Z24. I had a '93 Z24 Convertible... Very torquey, but absolutely no top end. With an automatic, my best time in the quarter was a 16.991

DuffMan
07-08-2003, 12:14 PM
Z24 has a lot of similarities to the KA24. A lot of the same dimensions, and are related designs.


Maybe that truck was turboed? They are pretty beefy, like the KA.

EDIT: also that engine was used in racing and I think there are parts from nismo to make it fast NA too.