TRAYZ06
04-29-2010, 06:34 AM
Alright. I'm throwing this out here as a feeler. I'm not sure if I want to sell it and go LS1 set up or just have fun with the SR20det motor.
I would like to sell the motor as a whole for $6200.00. I'll sell it without the Full-race Manifold for $5000.00 I would rather not part out a bunch of individual parts. The motor was built right for road racing purposes. ***Turbo is not available anymore that is in the picture.***
http://i14.photobucket.com/albums/a325/TRAYSTi/Project%20240sx/photo3-1.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/Project%20240sx/photo4-1.jpg
SR20det Black top:
- Full Race T3 Manifold
- Greddy Knock off Intake manifold. (Cleaned up, ported etc)
- Moroso Oilpan
- Light weight Pulley
- Polished silver fittings
- JE Pistons 86mm
- Eagle Rods (measured checked, and Balanced)
- ACL Bearings
- Cleaned, Honed, Machined, Balanced & Blueprinted)
- New oil pump
- New Waterpump
- Head cleaned, and Surfaced
- Head Fully ported, and Polished
- 3 Angle Valve Job.
- ARP Headstuds
- Cometic Head gasket
- BC 264 camshafts
- BC Intake & Exhaust valves
- BC Springs retainers, seats, seals, etc
- Biglen V2 Solid lifters
- Spec Clutch
- Cleaned up Wiring harness.
- Sr20det Ecu
Everything in the engine and on the engine has been installed by a professional master tech. The parts are all new, except my Spec Clutch. The longblock came from the machine shop cleaned, bored, services, etc and has been on my engine stand in my garage.
I am wanting to go LS1 /LS6 etc Motor swap so I'm sure there is going to be a lot of turbo parts I won't need anymore. If I decide on not going Turbo I have some extras for sale
- Q45 MAF - $45.00
- Aeromotive A1000 Fuel pump (Brand new) - $250.00
- Front mount intercooler kit with piping - $175.00
- Tial 50mm BOV kit - $150.00
- SR20det 5 speed - $200.00
If you have any questions feel free to give me a call on my cell or send me an e-mail. If I don't anwser the phone during the day it is because I am at work and I'll call you back after 6pm. Tray 770-597-2227. My e-mail is [email protected]
I would like to sell the motor as a whole for $6200.00. I'll sell it without the Full-race Manifold for $5000.00 I would rather not part out a bunch of individual parts. The motor was built right for road racing purposes. ***Turbo is not available anymore that is in the picture.***
http://i14.photobucket.com/albums/a325/TRAYSTi/Project%20240sx/photo3-1.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/Project%20240sx/photo4-1.jpg
SR20det Black top:
- Full Race T3 Manifold
- Greddy Knock off Intake manifold. (Cleaned up, ported etc)
- Moroso Oilpan
- Light weight Pulley
- Polished silver fittings
- JE Pistons 86mm
- Eagle Rods (measured checked, and Balanced)
- ACL Bearings
- Cleaned, Honed, Machined, Balanced & Blueprinted)
- New oil pump
- New Waterpump
- Head cleaned, and Surfaced
- Head Fully ported, and Polished
- 3 Angle Valve Job.
- ARP Headstuds
- Cometic Head gasket
- BC 264 camshafts
- BC Intake & Exhaust valves
- BC Springs retainers, seats, seals, etc
- Biglen V2 Solid lifters
- Spec Clutch
- Cleaned up Wiring harness.
- Sr20det Ecu
Everything in the engine and on the engine has been installed by a professional master tech. The parts are all new, except my Spec Clutch. The longblock came from the machine shop cleaned, bored, services, etc and has been on my engine stand in my garage.
I am wanting to go LS1 /LS6 etc Motor swap so I'm sure there is going to be a lot of turbo parts I won't need anymore. If I decide on not going Turbo I have some extras for sale
- Q45 MAF - $45.00
- Aeromotive A1000 Fuel pump (Brand new) - $250.00
- Front mount intercooler kit with piping - $175.00
- Tial 50mm BOV kit - $150.00
- SR20det 5 speed - $200.00
If you have any questions feel free to give me a call on my cell or send me an e-mail. If I don't anwser the phone during the day it is because I am at work and I'll call you back after 6pm. Tray 770-597-2227. My e-mail is [email protected]