oil feed question

[idamaster]

I bought turbo lines from a member but I am not sure what else I need to buy to get everything right for the feed. I want to use stock location on the sr20 block and the turbo will be a journal bearing garrett t3. If you can please show me what fittings I need to buy for the block and turbo side. I "think" I need a banjo fitting for the motor side and a restrictor for the turbo side but I have no idea what kind..
http://i288.photobucket.com/albums/ll184/idamaster/240sx/IMAG0105.jpg
http://i288.photobucket.com/albums/ll184/idamaster/240sx/IMAG0106.jpg
http://i288.photobucket.com/albums/ll184/idamaster/240sx/IMAG0107.jpg

[j20accord00]

you just need straight fittings. I ordered mine off jegs or summit racing. they were earl fittings. I dont remember the size but you can search and find them.

the thread for the block is 7/16-24 i believe. i just did a quick google search.

the other end is probably 1/8th npt

[idamaster]

Ok i just found that it is 12x1.25 on the block. Is the fitting I have -3 AN? Whats the size of the fitting for the turbo?

[idamaster]

So I will need a 12x1.25 or 7/16-24 for the block on one side for the block and 1/8th NPT for the side of the hose? What is the size on the garrett t3?

[japslapsilvia]

block is M12-1.25.

[idamaster]

The turbo is 1/8th NPT. What size is the line itself though? -4AN? Also I am only able to find 12x1.5 fittings not 12x1.25

[japslapsilvia]

cant tell from the pic if ur line is -3an or not but if it is...here is the fitting u need for the block

Pegasus - Male 12 x 1.25mm Metric Convex Seat to 3AN Male, Steel (http://www.pegasusautoracing.com/productdetails.asp?RecID=5936)