View Full Version : rear 5lug swap question
s13love-green
04-27-2010, 10:25 AM
ok so i got the front on already on s13
and so my question is for the rear 5lug i got it off an s14
came wit all it will i need the s14 axel too? i know ill need the lca
do i just swap out all s13 axal for s14 axal?
thanks
98s14inaz
04-27-2010, 10:34 AM
I already installed the front hubs on on my s13. The rear 5 lug hubs are from an s14, my question is will I need the s14 axles too? i know ill need the lca < (no idea what you said here)
thanks
^I tried to translate what you typed lol
S13 and s14 axles are the same except for length. Use your s13 axles on the s14 hubs. You'll be fine unless you don't torque them enough 150+ ftlbs.
240Zfunahollic
04-27-2010, 10:35 AM
the only thing you need for the rear is the hub, the control arm wont fit.
s13love-green
04-27-2010, 11:02 AM
the only thing you need for the rear is the hub, the control arm wont fit.
ok so just hubs?????
s13love-green
04-27-2010, 11:03 AM
^I tried to translate what you typed lol
S13 and s14 axles are the same except for length. Use your s13 axles on the s14 hubs. You'll be fine unless you don't torque them enough 150+ ftlbs.
lol oops i misspelled axles lol my bad, thanks
mazersx
04-27-2010, 11:15 AM
lca = lower control arm.
the s14 lca will not work on a s13.
its plug and play for the rear hub just remove the axle bolt is 36mm
and then go around and take off the hub is four 19mm bolts.
swap out the rotors and hub then your set to go.
roboticnissan
04-27-2010, 12:04 PM
yes this guys know what he is talking about^^^^^^^^you cant take an s14 axle and just swap it to the s13 cuz the bolt pattern for the diff is different.
DALAZ_68
04-27-2010, 12:18 PM
the only thing you need for the rear is the hub, the control arm wont fit.
ok so just hubs?????
did you really just repeat the answer in a form of a question... :bowrofl:
yes...ALL YOU NEED FOR THE REAR IS THE HUBS!
s13love-green
04-27-2010, 12:41 PM
lca = lower control arm.
the s14 lca will not work on a s13.
its plug and play for the rear hub just remove the axle bolt is 36mm
and then go around and take off the hub is four 19mm bolts.
swap out the rotors and hub then your set to go.
thanks hope its as simple as u say :)
s13love-green
04-27-2010, 12:42 PM
did you really just repeat the answer in a form of a question... :bowrofl:
yes...ALL YOU NEED FOR THE REAR IS THE HUBS!
it dont hurt to double check lol
s13love-green
04-27-2010, 12:42 PM
ok now to go do it thanks every one
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.