S13 problems :(

[S13 IN MY BLOOD]

hey peoples i have a 1992 s13 hatch with the stock ka24de. Ok the problem is that i was driving my car and i heard a loud sound in my engine like if the belts where glazed os something and about 30 seconds after my car started hesitating and then stalled.well i pulled over and soon came to find out that my wiring harness in the front of the engine got cought in the fan and obviously it got rapped around. Well i reconnected the cables back to the same way they where except for the maf sensor plug it got destroyed and since is my only way of transportation i kept driving it without the maf sensor ofcourse it hesitated and only reved up to 3500rpm but it ran so rich that my bumper turned black. Everything was fine for about a week and then i finally got the maf sensor plug from a 1996 nissan altima cus i couldnt find the four pin plug on any other 240sx or nissan. So i plug it in and it worked fine but it felt like sluggish like if something was wrong but i kept driving it like that to work and now it keeps idling rough and sometimes when i try to start it it wont start and when i let go of the switch it stalls and blows blue air through my intake. Im so pissed of cus i love my s13 and now i cant drive it. If any one can help me with this problem i would really appreciate it! Thanks

[91white_ka]

GET THE RIGHT MAF CLIP.....double check all your wiring again. Remove and clean spark plugs, O2 sensor, and even maf for that matter with the blue air your are describing, then report back.

[S13 IN MY BLOOD]

Thanxx for the help! Ill be checking all of those sensors this weekend and even fuel pressure and ill let you know results . I had a feeling it had something to do with a sensor cus i rechecked everything in the wiring like 10 times and everything was good. Keep you posted thanx again

[S13 IN MY BLOOD]

Ok i checked everything and i got the car to run right it turned out to be the spark plugs they where black, thanks for that! And also the fuel was dirty so i cleaned it and now is running fine but only without the maf. So i said to my self the maf is bad so i went on ebay and bought a used one for about 59 bucks and i installed it and still the same problem it just wont run right with the maf. The thing is now that i dont know if its the maf or something else thats causing this problem??????