What was YOUR first mod?

[exitspeed]

Mine CF momo shift knob:bigok:

Not gonna do much else until engine swap in winter 'cept fixing things here and there that are old and worn.

[Titan Locks]

a new tank of gas:p

[Dousan_PG]

s14 seats

..then coilovers
..then TC rods
..then 2way LSD

and it goes from there..

if i had to do it all over again (cough cough, 2nd car)

2way lsd
s14 seats
coilovers
etc...

[240_keyy]

I am in same boat as Dousan.

S14 Seats <-- $80 for set and wife paid :)

then I got all this at the same time...
Tein HE's
JDM VLSD
TC Rods
Whiteline Sways

and the rest is history...

However, you have to keep in mind that I have only had my car since December and it is already where it is now :boink:

[WhiteNissanS13]

lowering springs

[Steeles]

momo pedals.... cant remember if I bought them before or after I orderd the intake... definatley had them before it got it though

[nrcooled]

SR20DET

[West]

First Mod Ever was back in 1996ish and on my 89 SOHC Hatchback, I bought a Stillen FSTB and a JWT Pop Intake Charger :D Cost me like 350 some dollars too!

lol

[S14Speed997]

Rims
CF shift knob..
Springs...
and then my car swallowed my wallet, and came back with a bunch of new toys she wanted on her....

[exitspeed]

nice pics of the SR. The rest of the pics though:-/ jk.

[nrcooled]

Originally posted by WeST
First Mod Ever was back in 1996ish and on my 89 SOHC Hatchback, I bought a Stillen FSTB and a JWT Pop Intake Charger :D Cost me like 350 some dollars too!

lol

Exactly the reason I don't shop at Stillen....or should I say Stealn'
They offer the same products as everyone else just at higher prices. I asked "why do you guys charge so much?" and the answer was because of good service. I never thought the service was better than enjuku or Heavy Throttle plus Ken and Jeff actually know what they're talking about!:bowdown:

[nrcooled]

Originally posted by exitspeed
nice pics of the SR. The rest of the pics though:-/ jk.

Are you doggin' on my Family...boy I will beat you with a rubber hose!:hammer:

[019]

first mod was springs/shocks.

[exitspeed]

No I was kidding. The pic of the open mouth was kinda funny though.

[Bbandit]

my first mod..
replaced my brake pads

then..
tein HE
cusco tension bar
2 way LSD

thats it :coolugh:

[Rennen]

My first mod. As soon as I got the car, I yanked the Y-pipe and resonator off the intake.

As for real mods.
Tires
PDM poly TC bushings

-Matt

[S14TiNMAN]

kouki front end conversion

[Heartwork]

Cusco Comp Zero 2 coilovers
Cusco f/r upper strut bars
Cusco sway bars
unknown short shifter (already on teh car)
- all on the car already

....waiting for a plethora of parts to go on

:boink:

[Red]

Mine was a JWT pop charger.... Ouch paid to much.

[xS1LV1Ax]

Injen CAI

[Yoshi]

1st 240: K&N drop-in air filter
2nd 240: SR20DET

[AceInHole]

eibach sportlines and GR2's

[pruto]

after crashing my old car because of some whacked pedal situation (looong story) i got paranoid and the first mod was a set of cheap pedal add ons.

then:
GAB/prokit
z brakes/5 lug swap/z wheels/tires
subframe spacer
whiteline sways
nismo LSD
aero pieces

if i had to do it over...:
i would have saved all that $$$ and gotten a **** load of booze for my 21st bday ;)

[Got Sileighty?]

Originally posted by 240_keyy
I am in same boat as Dousan.

S14 Seats <-- $80 for set and wife paid :)



:confused: how did u get a set for $80??? i always find em for about 200-250. :cry:

my first mod: head unit and speakers. wheels are next. then lay low to get a second car for daily driving hehe

[zero.counter]

Replaced the premium sound system in its entirety.

[240_keyy]

Originally posted by Got Sileighty?
:confused: how did u get a set for $80??? i always find em for about 200-250. :cry:

Went to a junkyard and got them, I dunno why they were so cheap... :coolugh:

[SilviaDriver]

intake
kouki tails

[West]

Originally posted by nrcooled
Exactly the reason I don't shop at Stillen....or should I say Stealn'
They offer the same products as everyone else just at higher prices. I asked "why do you guys charge so much?" and the answer was because of good service. I never thought the service was better than enjuku or Heavy Throttle plus Ken and Jeff actually know what they're talking about!:bowdown:

Ya well, umm... Nothing Existed back in 96 bro :p

[91CRXsiR]

Diamond Cut H4 conversion
then - FSTRB
then - RSTRB
then - exhaust
then - sleepy eyes
then - DOHC SE WHEELS
then - crash

then - new car
then - RSTRB
then - sleepy eyes
then - exhaust

[ISTOTOSAO]

sr, ACT street & strip, and nismo engine mounts all at install, then blitz down pipe, f & r stb, wheels, apex filter kit. Still paying it off:rolleyes: .

[vapor_skank]

sr20.....hehehe:D

my wheels arent stock but they were there when i got my 240...

[Bill Roberts]

Previous owner already inserted larger injectors, port and polished the head, bored 40 over, 2.75 inch exhaust, modded the ECU, Ported the intake plentium, changed the coil, wires and colder plugs (good move on the colder plugs) reinforced the torsion rods to the rear axel, larger transmission dampner and a short throw stick. He also got a JDM intake trought that was much larger, put holes in the input canister and intalled a beefier driveshaft and doughnut.

I, Moved the 3rd intake inlet so the sleepy eye would work better, intalled a K&N air filter (good) put sticky tires all the way round and did a 3degree negative camber on the rear suspention. I installed a second transmission dampner from an 84 nissan 4X4. I replaced the cat with a free flow, got some modded o2 sensors from a buddy of mine, put a 1 ohm resistor on the injectors (to lean it out a shade more) and took that goddamned block from behind my gas pedal that kept my butterfly from opening fully. I also can run very fast for a SOHC 89. Scary fast compared to others. It came with the sport package, he added some bushings, it is tight in handling and drifting. It also has an LSD (orange tag is there).


My First real mod was the airfilter, air induction changing and the sleepy eyes.

[boro240]

Volk Mesh.

[AlligatorBling]

a cool little pine tree air freshener

[thelinja]

First and ONLY mod :
Duct tape in trunk release to keep trunk from rattling.

This will change within the next few weeks when I install a centerforce clutch, however.

[L.D. 100]

first i cleaned it...
then i modded it...so that it ran...
next is cheap *** universal intake
91 bumper (its an 89)
Apex'i RS Turbo muffler with 2.5 custom piping
paint job :bowdown: platinum blue
oh one rim...cuz it suffered from curb rash

basically im not doing any expensive mods till i get the ultimate, Rb25 or 34, i cant decide yet, most likely 34 if i have the self-control not to buy a rb25 while saving up for the 34.