PDA

View Full Version : NY SR20DET Blitz Active clutch $450

yoozef
04-19-2010, 07:31 PM
This is the single plate Blitz Active clutch system. The great thing about this clutch is that it is easily upgradeable to a twin disc. Also it is lighter than stock flywheel/clutch combo. It comes with everything you see in the picture, even the bolts and washers. The throwout bearing is NOT included. This was in my car for about 3 years, but I do not know the exact mileage. The car was mostly a weekend/fair weather vehicle that was also taken to the track for about 6 total passes. There is still a good bit of life left on it unless you plan on thrashing it with drifting or other very aggressive driving. I will be honest... this is a tight, touchy clutch that grabs quickly. Even after 3 years, I found myself stalling from time to time. For about the last month that I drove the car, I began to notice a slight slip at 15 PSI of boost (on stock SR20 turbo). However, it still did great with lower boost. It holds fine and still broke tires loose anywhere from 7-11 PSI. This would be perfect for the mild daily driver or weekend racer with less than 300 HP. I would recommend resurfacing the flywheel while the clutch is out, but, its not absolutely necessary. If you have any questions, pm me. Shipping will be a fixed rate of $35.00.
http://i29.photobucket.com/albums/c276/dzerek/blitz.jpg
nzmoman
04-19-2010, 08:18 PM
I have this clutch. It chatters a little, but it is good clutch for daily. It is a great clutch if you like to put power down on the street or on the track. The kit is worth the 900+ that these cost new.
rebornS14
04-19-2010, 10:05 PM
WOW! i would have totally bought it if the replacement clutch didnt cost as much as your kit! lolz. must be an awesome kit. GLWS
nzmoman
04-19-2010, 10:35 PM
you can get these rebuilt. I will get mine rebuilt locally. Its cheaper and they can rebuild them and make them stronger than they came from the factory.

just so you know.
yoozef
04-20-2010, 10:57 AM
^^ what he said, i think it's around $100 to rebuild it?
yoozef
04-23-2010, 11:52 PM
bump to the top, i found a place where they can rebuild the clutch disc for $40 + shipping, i'll pass the info to the buyer, or just buy a new disc
Also the flywheel and pressure plate are getting resurfaced over the weekend
yoozef
04-25-2010, 04:16 PM
taking offers
yoozef
04-26-2010, 07:37 PM
pics as requested:
http://i29.photobucket.com/albums/c276/dzerek/DSCN3982.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3983.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3985.jpg

http://i29.photobucket.com/albums/c276/dzerek/DSCN3986.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3987.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3993.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3994.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3995.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3995.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3997.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN3998.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN4000.jpg
http://i29.photobucket.com/albums/c276/dzerek/DSCN4001.jpg
sorry for scratches all over the place, i wanted to clean the clutch dust off
yoozef
04-28-2010, 09:16 AM
it's still available
yoozef
04-29-2010, 11:55 AM
bump to the top
yoozef
05-01-2010, 10:26 AM
someone is picking it up thuesday
racerx2k1
05-01-2010, 10:39 AM
bump to the top, i found a place where they can rebuild the clutch disc for $40 + shipping, i'll pass the info to the buyer, or just buy a new disc
Also the flywheel and pressure plate are getting resurfaced over the weekend

taking offers

it's still available

bump to the top

someone is picking it up thuesday

2 bump limit. You can start new thread in 3 days.