320hp caged white s13. The works--$10,000

[tdcxalexander]

NEWEST PICTURES*****

http://www.flickr.com/photos/[email protected]/sets/72157624175139039/

******

http://4.bp.blogspot.com/_cfs6GYiZkoo/S3nUp9W1OWI/AAAAAAAAAD0/NeJP0UzpUJs/s400/4152872773_9d89a3c505_o.jpg

http://2.bp.blogspot.com/_cfs6GYiZkoo/S3nUaxin4kI/AAAAAAAAADs/teUw4gzC4YY/s400/hin5.jpg

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/wtbAEFD9ZLI&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/wtbAEFD9ZLI&color1=0xb1b1b1&color2=0xcfcfcf&hl=en_US&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="640" height="385"></embed></object>

All the information and more can be found here: www.greatwhite180sx.blogspot.com (http://zilvia.net/f/www.greatwhite180sx.blogspot.com)

Excerpt from blog:

Specs (http://greatwhite180sx.blogspot.com/2009/05/specs.html)

Engine:

Rebuilt Blacktop s13 sr20det
86.5mm bore
Line bored for ARP main stud kit
Shaved, Balanced, and Polished Crankshaft
Rotating assembly balanced
Engine Blueprinted
-ARP main hardware
-ARP rod hardware
- OE Nissan main bearings
- OE Nissan rod bearings
- CP forged pistons 8.5:1 86.5 overbore
- Apexi 1.6mm headgasket
- Ported/polished head
- Angled valve job
- Bronze valve guides
- BC valve springs
- BC titanium retainers
- Greddy rocker arm stoppers
- HKS step 1 264 cams
- Greddy intake manifold
- Nismo/Tomei 740cc injectors
- Aluminum high capacity baffled oil pan
- Oil pump
- water pump

Turbo and other components:

-AMS Precision gt3251e t3 flanged .63 exhaust housing
-Tial 38mm external wastegate
-BLU808 custom top mount manifold (currently in R&D)
-Custom turbo bracing
-Custom V band flange downpipe w/ flex pipe
-HKS intercooler with custom intercooler piping
-HKS ssqv bov
-Koyo Radiator
-Samco radiator hoses
-Dual flex-a-lite fans
-Power FC d-jetro engine control management
-Greddy oil catch can
-Oil cooler (coming soon)
-SARD Fuel pressure regulator

Drivetrain:

-Nismo engine mounts
-Nismo transmission mount
-Twin plate exedy clutch
-Nismo hardened clutch actuator pivot
-Welded differential
-Short shifter

Suspension:

-Tein super drift 10k/8k
-Modified steering knuckles
-SPL parts tension rods
-SPL parts outter tie rod
-300zx inner tie rod + steering angle spacers
-Crossroads rear sway bar
-SPL parts rear toe rods
-SPL parts rear traction rods
-Powered by max RUCA's
-Nismo subframe bushings
-Powered by max aluminum subframe inserts

Wheels and Brakes:

-Work cr kai 17x9 + 17 polished w/ 15mm spacer 215/40/17 dunlop star spec z1
-Work cr kai 18x9.5 +12 polished w/ 3mm spacer 255/35/18
-Grenade wheels 17x9 +15 Gold 245/40/17
-300zx front brakes
-axis ultimate brake pads front and rear
-stainless steel braided brake lines
-spin knob

Interior:

-6 point rollcage with side bars, vinyl'd white
-cd player
-momo monte carlo steering wheel with quick release
-boost gauge
-water temp gauge
-oil pressure gauge
-oil temp gauge
-wideband
-sick shift knob
-Bride ZETA II
-Bride low seat rail
-s14 passenger seat
-Carpet

Exterior:

-OE kouki 180sx kit w/ lip
-Kouki wing
-Kouki tailights
-Rear window lip spoiler
-JDM Drop Vented fiberglass hood

320HP
Tuned on a Dynapack by Frank @ Garage Boso.
Runs perfect.
Leak down test and compression test is good.
Brand new turbo 0 miles.
Built with 6 years experience.
Oil changed for every event.
Transported with Trailer

$10,000

Located in Oakland, CA.

Contact: [email protected]

Thank you for checking it out.

[FETUStheCAT!]

GLWS. That shits beast!

[MTalon]

interior pictures? engine bay pictures?

[tdcxalexander]

Some more pictures

http://i58.photobucket.com/albums/g260/xhatesdriving/hin9.jpghttp://i58.photobucket.com/albums/g260/xhatesdriving/HINSM09_3161.jpghttp://i58.photobucket.com/albums/g260/xhatesdriving/DSCF3006-1.jpghttp://i58.photobucket.com/albums/g260/xhatesdriving/3958821635_0fb7946f7d.jpg

I'll have more, better 'for sale' pictures when I get the chance.
I am very busy.

[EATSL33PDRIFT]

^^ Do you have those white wheels on the rear still? :)
:bump: car looks tits

[Marcus]

how was spinning the 255s with 320?
buttery huh?

also how did you like the setup with 215 and 255 stagger?

anyway, sick car.

[240sx...YAY!]

GLWS, badass car!

[ZX88]

would you part the 18" works.

[tdcxalexander]

My bad for not replying, I was engaged with a potential buyer but it ended up not working out because he found another car before he had the chance to check mine out.

Marcus: Yes, very buttery. Thanks

ZX88: Not at the moment, but If I part out I will let you know.

The car is still for sale, now with a BRAND NEW turbo center section. The turbo rebuild didn't go so well, so I ended up shelling out $500 to buy a new center section!

$10,000
Ready to go!

[JuJubes]

fAlken d1 rx-7?

[creyes13491]

dang. this car is sexy!!! straight up sexyyyy! haha GLWS

[tdcxalexander]

Yeup, That's Calvins FD. We did a few HIN demos together.

Thanks for the sexiness.

[pink godzila]

Nice car...... but why still on welded diff...?

[CleanAndLegit]

fuckin clean my dream :] except with diff wheels bump and lucky mofo who buys :]

[tdcxalexander]

Was planning on purchasing a 1.5way, but never got around to it.

Thanks again, I hope some lucky mofo does buy it.

[tdcxalexander]

would anyone be interested in the rolling caged shell or sr engine set?

[tdcxalexander]

I'd be stoked if someone bought the car!

More detailed pictures are on their way...

Open to trades also. Interested in daily drivers, motorcycles, jetskis, and boats.

[CleanAndLegit]

ill give u my car and ill do payments!
or id take your shell for my running sr hatch! :D

[tdcxalexander]

I'd be down for payments, with $7,500 down.

[flybye]

Same turbo I run...except I just had Presicion put in a GT3271 CHRA for me. Im shooting for 400rwhp though.

Nice car man GLWS!

[sadairk2]

Sick build. GLWS.

[Weedm]

good shit.

[s14gj]

sick ass car!!!! im in th market for a s13. but don't have that kind of cash to spend. hit me up if you go down on the price or if u take some stuff off.

[tdcxalexander]

Bobby, I just e-mailed you. I think we may be able to work something out if I take some parts off.

Thanks for the compliments guys, I'm sad to let her go but it must be done.

NEW PICTURES!

Great White 180sx - a set on Flickr (http://www.flickr.com/photos/[email protected]/sets/72157624175139039/)

[doublestitch180]

Sweet car bro. Why U sellin?

Tuned by Frank @ BoSo huh? Good guy. You know it was done RIGHT.
GLWS

[tdcxalexander]

No doubt, Frank is a Master Tuner! Highly recommended.

Selling because I'm fresh out of college and trying to focus my energy towards building my career. I currently have a internship that pays me in peanuts, so i'm in need of some living money. I'm liquidating!

[tdcxalexander]

$8,500 without work wheels