s14 parts

[FusionR240sx]

s14 5spd parts - LONG LIST
5 speed Driveshaft front and rear sections ABS+LSD
M/T flywheel bolts (A/T bolts are too short)
Throwout bearing, Pressure Platehttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/#), alignment tool)
Shifter assembly (plate, lower rubber boot, upper leather boot, finisher plate)
5 speed Crossmember
Clutch Master cylinder
Clutch Slave cylinder
Clutch hardlines
Clutch rubber line and dampener line
Clutch pedal assembly
Bellhousing bolts for a 5 speed bellhousing
Bolts to hold Pressure Plate to Flywheel

***i already have the ecu, tranny, clutch, flywheel***

s14 roof spoiler - i see them for $100 bux on ebay, the last one i bought was from a vendor for $65 shipped (i wish i could get that again)
don't really want the dmax style spoiler but if it's a good deal i'll think about it.


s14 jdm window visors

all parts with prices shipped to 60018

[MiSuNdErStOoD]

s14 5spd parts - LONG LIST
5 speed Driveshaft front and rear sections ABS+LSD
M/T flywheel bolts (A/T bolts are too short)
Throwout bearing, Pressure Platehttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/#), alignment tool)
Shifter assembly (plate, lower rubber boot, upper leather boot, finisher plate)
5 speed Crossmember
Clutch Master cylinder
Clutch Slave cylinder
Clutch hardlines
Clutch rubber line and dampener line
Clutch pedal assembly
Bellhousing bolts for a 5 speed bellhousing
Bolts to hold Pressure Plate to Flywheel

***i already have the ecu, tranny, clutch, flywheel***

s14 roof spoiler - i see them for $100 bux on ebay, the last one i bought was from a vendor for $65 shipped (i wish i could get that again)
don't really want the dmax style spoiler but if it's a good deal i'll think about it.


s14 jdm window visors

all parts with prices shipped to 60018

I have flywheel bolts, pressure plate bolts and bell housing bolts all for $60 shipped. Used clutch kit and throw out bearing for $50 lower boot for $20, cross member for $50, master and slave for $30, rubber lines and hardlines for $30. Let me know, I have paypal ready to go.

[FusionR240sx]

get some1 to vouch for you and i'll get everything but the clutch kit and throw out bearing.. ^^

[MiSuNdErStOoD]

get some1 to vouch for you and i'll get everything but the clutch kit and throw out bearing.. ^^

I don't really have anyone to vouch for me but I am papal verified for years now and I also am currently a eBay seller. I could list it all there for you on eBay as a package but I would have to charge a little more for the fees. Let me know

[FusionR240sx]

bumpity bumpperr