Panasport G7 c5c2 17x8 +18 17x9 +12 5x114.3

[gprb25]

Looking to see what interest there is in my spare wheels. $1000 obo + shipping

I bought a set of G7's about two years ago, then came across another set on here with similar(but slightly better) sizes a few months ago. The lips are a little different, but isn't too noticeable. Only two centercaps are available.

I used the rears from my original set and the fronts from the new set.

Soooo, for sale is a set of (2)17x8 +18 and (2)17x9 +12 5x114.3. offsets are approximate, there are no stickers on the barrels.

note: fronts need spacer to clear coilovers/z brakes in most situations. I used a 15mm PBM and had zero issues.

Pictures:
from left to right - 17x8, 17x8, 17x9, 17x9
http://img179.imageshack.us/img179/7135/gregzilviasell.jpg (http://img179.imageshack.us/i/gregzilviasell.jpg/)
http://img43.imageshack.us/img43/6691/gregzilviasell025.jpg (http://img43.imageshack.us/i/gregzilviasell025.jpg/)

17x9 lip
http://img199.imageshack.us/img199/3098/gregzilviasell018.jpg (http://img199.imageshack.us/i/gregzilviasell018.jpg/)

17x8 lip
http://img265.imageshack.us/img265/9800/gregzilviasell019.jpg (http://img265.imageshack.us/i/gregzilviasell019.jpg/)

My set on my car(not the set for sale) -- just for reference
http://img683.imageshack.us/img683/327/gregzilviasell030.jpg (http://img683.imageshack.us/i/gregzilviasell030.jpg/)

Thanks for looking, more detailed pics available for serious buyers

[gprb25]

bump to the top

[Lovely Idol Inc.]

Seen these in person, they are fucking awesome.

[Crazyirish]

A definite offset measurement would help. 17x8 +18 Should clear coilovers by a mile.

[drift_limo]

i hate you.... jp
fudge!!!

these are 2 piece or 3 piece right? either way they can be re-barrel'd if I might be interested.

[lflkajfj12123]

so awesome

[RJs13]

pmed you offer

[gprb25]

A definite offset measurement would help. 17x8 +18 Should clear coilovers by a mile.

Sorry for the late response, but I took the time to do some research and measurements.

The front wheels are 8 inches which equals 203.2mm

So, the center line is 101.6mm

Measuring the backspace, I came up with 3 5/16 inches, which equals 84mm

Which equates to 101.6mm
-84.0mm
_______
17.6mm offset

So, the fronts are confirmed +18mm offset.

Picture to show backspacing

http://img249.imageshack.us/img249/4587/gregzilviasell051.jpg (http://img249.imageshack.us/i/gregzilviasell051.jpg/)

I took the time to measure the rear wheels as well.

The wheels are 9 inches, so that is 228.6mm.

Centerline is 114.3mm

The backspacing measured was 4 1/8inches, or 104.775mm

So, 114.3mm
-104.775mm
__________
9.525 offset

So, the rear wheels seem to me ~ +10 offset

Picture of back spacing

http://img180.imageshack.us/img180/13/gregzilviasell055.jpg (http://img180.imageshack.us/i/gregzilviasell055.jpg/)


I hope that clears any confusion over the offsets.

i hate you.... jp
fudge!!!

these are 2 piece or 3 piece right? either way they can be re-barrel'd if I might be interested.


They are a true 3 piece wheel that can be re-barrel'd no problem.