S15 turbo problem

[Spaceboy]

Ok I got a low mileage s15 t28. I ran it for about a week or so it was fine then the car has been parked for 7 months and now im burning a ton of oil. Im 99% sure the seals are gone on the turbo. It has no shaft play and boosts great. I know you cant rebuild a BB turbo but can you just replace the seals in it??

[[email protected]]

yes, seals can be replaced(I think)
BUT I'm here to tell you that I'm sure you didn't use an oil restrictor. repair turbo and use an oil restrictor

[240_fun]

yeh make sure to use an oil restrictor... i have extras if you need to buy one

[Spaceboy]

Ya I didnt use an oil restrictor. Im new to the BB turbo game and the shop I got it from didnt tell me I needed one. Ill get on that. Do I need to get any special seals or will just a t28 rebuild kit have the seals I need in it?

[fliprayzin240sx]

BB turbos are NOT rebuildable...well not by you atleast. They need to be rebalanced and everything once you tear them down. You're better off buying another turbo or even yet, upgrade to a GT2871.

Anytime you go from journal bearing turbos to a BB turbo, you need a restrictor.

[chayo]

i need to be sure, this is the oil restrictor that is needed for the s15 turbo???

[cotbu]

I use the .035 -3

[chayo]

Turbo Oil restrictor Garrett Ball Bearing GT28R GT30R: eBay Motors (item 150472904669 end time Aug-26-10 16:58:42 PDT) (http://cgi.ebay.com/ebaymotors/Turbo-Oil-restrictor-Garrett-Ball-Bearing-GT28R-GT30R-_W0QQcmdZViewItemQQhashZitem2308e24fddQQitemZ15047 2904669QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)

this one works????

[cotbu]

DO you have a -4AN oil line if so, direct bolt on. If not, you probably have a -3an line you'll need an adapter or get a fitting that fits you line.

-3AN oil restrictor (http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-OIL-036&Category_Code=BCS)

[volkrps13]

lol yeh they are deffinitly not rebuildable.. you have to buy a new chra