Specific RB25 fitment question

[Paulpen]

Me again Zivilians :D

With all my RB onevia wiring all working now I just need to make it all tidy and to the right lengths but without the engine in its prving a tad tricky

Are there any engine bay pics of a S13 with a RB25 using Syko mounts with a front facing inlet as I need to know if the fuse box fits where it is as standard or if it needs moving elsewhere

[Ghost240]

needs to move elsewhere

[Paulpen]

needs to move elsewhere

Any idea what direction and by how much ?

Im guessing its more the throttle body that will catch rather than the inlet ?

Id like to keep it neat if I move it :)

[96Turbo]

http://i272.photobucket.com/albums/jj187/crazyhazey33/My%20S13/CIMG3625.jpg

mine is just floppin around there until I take the time to relocate it

[Paulpen]

Hmmmmmmm

I was just thinking of going closer to the battery but after seeing that maybe I should think about going closer to the bulkhead although that will affect oil filter access....

Its all going to be quite a squeeze :cry:

[96Turbo]

if you're gonna take the time to extend all the wires and relocate you should just relocate to inside the cabin (behind the glovebox is a good spot)

Otherwise, even with my piping connected it works...it's just not the best location for it

[drift freaq]

ah here are a couple of shots.

with Koyo before changing out to a Griffin Radiator, prototype stage of the Syko mounts as well. http://i705.photobucket.com/albums/ww52/driftfreaq/P6240021.jpg

http://i705.photobucket.com/albums/ww52/driftfreaq/leftRB25.jpg

Before anyone goes asking. I do not work with Syko anymore. I used but I wanted to do my own thing.

My car was the car used for the prototype kit and no I no longer own that car anymore either. In fact it was stolen from a shop Azusa just after I sold it and stripped to the bone. Turned up in Chino 2 days later. Minus all the parts of course.

[Paulpen]

if you're gonna take the time to extend all the wires and relocate you should just relocate to inside the cabin (behind the glovebox is a good spot)

Otherwise, even with my piping connected it works...it's just not the best location for it


I hear what your saying but ive got enough stuff inside the car already so im trying to keep things in roughly the same area and pratical at the same time. I was thinking under the slam panel cooling panels but dont think id be able to get the cover off then :ghey:

At least now I know it wont work in the standard location I can start exploring ideas :)