FS: Precision GT35R T4 .68ar - CHEAP

[3bar_dc2]

I'm selling my Precision T4/GT35R .68ar turbo. I bought this used. The tip of the exhaust blades are bent but I'm told it still works fine. I was told it was from running high egt's but Precision believes it's from a foreign object. I've also read on other forums of people running them this way with no problems. No signs of any leaking seals and very minimal shaft play. The compressor housing is polished. The turbo outlet is cut and I'm including a elbow with it so you can have it welded up for whichever way you need (since fmic piping setup may be different from car to car).

Selling a couple different ways-
$400 shipped for Turbo with fittings (-4an oil feed fitting, 5/8 oil return flange, 2 banjo to 3/8 hose water fittings)

If you don't want the exhaust housing I'll take $50 off.

I sent an email to Wes at Precision. He thinks a foreign object created the bent fins. It is repairable and I'm pretty sure that is all that is wrong. The turbo spins freely with very minimal (probably within specs) shaft play.

Here's the email he sent
Sean,
It is not very likely that your turbine wheel melted do to high egt's. It sounds like you had some type of foreign object go through your exhaust. In order to fix it you are looking at around $330. That is to just for the Turbine wheel and labor. If there are any other issues with the turbo the price can go up.
Thanks,

Wes Born
Precision Turbo Service Technician
(219) 996-7832

Someone could pick this up, send it off, and get a fresh gt35r for $700. Like I said, I was going to run this as is.

Thanks,
Sean

http://hondamarketplace.com/attachment.php?attachmentid=113901&stc=1&d=1268497073

http://hondamarketplace.com/attachment.php?attachmentid=113905&stc=1&d=1268497073

http://www.honda-tech.com/attachment.php?attachmentid=120960&stc=1&d=1270923860

http://www.honda-tech.com/attachment.php?attachmentid=120962&stc=1&d=1270923860

[david200095367]

nvrmind..........