Set of Drift Freaq custom Urethane KA/SR Engine mounts, Brand NEW!!

[drift freaq]

I have sold over the years. Lots of track time with people running these mounts. Lots of daily drivers. For KA/SR or CA.
They are Custom Urethane Engine mounts I have made.

These are high durometer polyurethane engine mounts. The mount bolts do not run straight through the Urethane .

This is done so as to prevent vibrational transfer that you would get with straight through side to side stud.

On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot aka the industrial window caulking stuff which is inferior!

These can lower you engine up to 3/4 of inch depending on how you position them.

The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top.



It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo!

These are $120 a pair with $15 shipping so thats $135 shipped!
http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0662.jpg

[drift freaq]

back on up

[2fast4y0u]

do u have any better pics. i would like to see them on a car and see other pics of the mounts

[slider2828]

I'll put em up next week, but these are awesome....

[2fast4y0u]

i would love to see them.
i have 1 peak solid mount and i HATE it!!! everything in my car sounds like its gonna break off.
not the feel im going for

[slider2828]

I have nismo's and it makes the car rattle like crazy cause the engine is raised and my theory the 1 pc driveshaft is NOT aligned with the diff....

[alpha180sx]

good quality.


dave you should name this mounts "freaqmounts"

hehe bump!

[2fast4y0u]

well i dont think i have a driveshaft alignment issue...i think i have a "my motor is literally bolted to the chasis and i can feel every piston cycle and valve movement issue"
i want to be able to drive my and enjoy it and its not enjoyable right now.

[drift freaq]

do u have any better pics. i would like to see them on a car and see other pics of the mounts

I do not at this time, but I can tell you it will lower your engine in comparison to Nismo mounts.You will not get any vibration as well.

[slider2828]

I have nismo's right now and it blows.... freaq, maybe you can make some tranny mounts too!

[Lumos]

would these work for a ca also? If so I'm very interested.

[TerminalSamurai]

Anyway to make these in different colors? I'm just not a fan of yellow..... :hide:

[drift freaq]

Anyway to make these in different colors? I'm just not a fan of yellow..... :hide:

LOL no, It would cost a fair amount of money to make a large run, which is what is needed to change the color. Unless people start magically buying them by the shit ton its not going to happen.

Plus seriously the yellow is not that bad and its underneath your engine. LOL its not that horrific looking. LOL

[2fast4y0u]

maybe drift freaq and i could work something out...i run a vinyl shop, we could wrap these mounts in vinyl and make then ANY color u want :D

i dont know if that would work with the heat though.

anyway, i will be picking up a set of these next pay day.

[Gold Zenki]

trade a set for my new delrin solids?

[drift freaq]

trade a set for my new delrin solids?

lol are you talking to me or the guy above you? LOL

[Gold Zenki]

lol are you talking to me or the guy above you? LOL

to you lol.

[drift freaq]

to you lol.

no I do not trade mounts. I sell mounts. LOL

[drift freaq]

back on up again for the final official bump and not question answered.

[drift freaq]

would these work for a ca also? If so I'm very interested.

how did I miss this question? Yes they will work with a CA as well.

[2fast4y0u]

free bump!
i cant afford these yet, but i will keep it going for ya

[Z33dori]

still have any?

[drift freaq]

still have any?

yes I have a set right now.