PDA

View Full Version : Relocated Harness Through Subframe *PICS*

Kouki_monstr
04-08-2010, 05:18 PM
Hey guys, just thought i would post up what my buddy Aarron and I have been doing these last few days. Instead of using zipties to hold the harness up and hoping that they never brake (which they do) we decided to remove the harness from the fuse box to the wheel well, drill 2 holes, and feed the harness through the subframe. It was some hard work but deff worth it. Hope this can give you guys an idea for those wondering what they should do with there harness. Thanks


Before..
http://i5.photobucket.com/albums/y200/ps13drifter44/harnessss.jpg

My buddy removing the wires from the fuse box
http://i5.photobucket.com/albums/y200/ps13drifter44/harness555.jpg

http://i5.photobucket.com/albums/y200/ps13drifter44/harness444.jpg

After
http://i5.photobucket.com/albums/y200/ps13drifter44/harness777.jpg

http://i5.photobucket.com/albums/y200/ps13drifter44/harnesss222.jpg


http://i5.photobucket.com/albums/y200/ps13drifter44/harness888.jpg
kapeta34
04-08-2010, 05:48 PM
nice job...
I LUV MY S13
04-08-2010, 06:13 PM
hook it up
mad-ass
04-08-2010, 06:23 PM
sweet, it looks super nice.

Job well done.
rollout240
04-08-2010, 06:31 PM
looks clean guys. a semi wire tuck is something if had on my agenda for a mega long time. power to you for thanks for the pics.
Homer_Simpson
04-08-2010, 07:36 PM
Nice, I like hoe you tucked that hood release cable in there as well.
Kouki_monstr
04-08-2010, 09:09 PM
Thank guys. Trying to do eveything right the first time around.
infam0us21
04-08-2010, 11:54 PM
Thats clean job!
DJPimpFlex
04-09-2010, 12:07 AM
Probably not to much of an issue, but I would maybe think about fender braces now. That part of the chassis is the weakest overall and any drilling would just make it worse. Probably not a HUGE issue though. Nice work overall. I just deleted that side all together, but my car doesn't have shit for wiring.
Kouki_monstr
04-09-2010, 11:01 AM
yea, eventually ill get some fender braces to stiffen it up a bit.
A54
04-20-2010, 02:21 AM
Nice...Thanks for posting your idea. It is always good to see a new idea.
NewfoundlandDude
04-20-2010, 07:21 AM
Sick! I'm gonna do this over the weekend when I install my harness.
Just for your future use, that's your inner fender, not subframe.
secondtonone317
04-20-2010, 09:08 AM
nice work, that fusebox is a flipping nightmare to take apart
EccentricAces
04-28-2010, 04:17 AM
Good stuff G, I was always wondering what people were doing about the harness + hood latch wire.

Bc mine has been getting eaten up even though they are both zip tied up.

Thanks for the info =)
Tearlessj
04-28-2010, 02:27 PM
That still might rub, I had it rub through at full lock.
Kouki_monstr
04-28-2010, 02:51 PM
Thanks guys, Glad i could help!

That still might rub, I had it rub through at full lock.

If by rub you mean on the sheet metal. I punded all the that sheet metal down pretty good, but i do rub mid turn on the fender. Im ganna raise the front just a tad because i know itll rubb full counter. Still waiting for my PBM set up so i can get more camber in the rear and lower the rear a lot more..