Speedometer = o & Odometer = not moving

[RD_240]

My speedometer and odometer arent working. Everything else in my gauge cluster works fine. I've checked to the VSS and everything is connected. Even tried different VSS but still no luck..

Any of you guys have this problem?

I have redtop SR20det swap

[slider2828]

Did you splice the white plug that is to the side of your glove box correctly?

[RD_240]

Can you elaborate on that? Sorry for not knowing so much.

[slider2828]

Well the right plug goes from the haress to that white plug, kinda flat with about 8 wires you were supposed to cut off from the old harness into the SR20 harness and then it goes down to your ecu....

SR20DET Swap Engine Harness Wiring Diagram Guide SR SR20 (http://www.frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html)

The first harness in the picture off the ecu blue one....

[Om1kron]

my odometer doesn't work, nor my temp needle. but the spedo is good I think I have a bad cluster, all wiring checks out. probably a wiring break on the firewall under the dash =(

hope you solve your problem. I hope you also used your speed sensor off of your previous transmission.

[lightsource]

are you using a single or dual cam cluster...

if you need to know how to identify, look @ redline, singlecam redline is at 6500, dualcam redline is at 7500.

[RD_240]

Well the right plug goes from the haress to that white plug, kinda flat with about 8 wires you were supposed to cut off from the old harness into the SR20 harness and then it goes down to your ecu....

SR20DET Swap Engine Harness Wiring Diagram Guide SR SR20 (http://www.frsport.com/SR20DET-Swap-Engine-Harness-Wiring-Diagram-Guide-SR-SR20_t_26.html)

The first harness in the picture off the ecu blue one....

Honestly i dont know as i didnt wire the harness. But looking from the carfax, it seems like the odometer/speedometer stopped working even when it still had the stock motor in it.

[RD_240]

are you using a single or dual cam cluster...

if you need to know how to identify, look @ redline, singlecam redline is at 6500, dualcam redline is at 7500.

Looks like the redline is at 6900 rpm?? Its a digital cluster with HUD.

http://memimage.cardomain.com/ride_images/3/1489/2001/28721000004_large.jpg

[RD_240]

no one has this issue?

[blueshark123]

did u try a new cluster they do go bad

[Soup Nazi]

My speedometer just bounces back and forth, and works when it wants to. My Odometer doesn't work either. I think it may just be a bad Cluster. I think mine is too

[RD_240]

Have not tried a new gauge cluster yet.