3bar_dc2
03-25-2010, 09:14 PM
I'm selling my Precision T4/GT35R .68ar turbo. I bought this used. The tip of the exhaust blades are bent but I'm told it still works fine. I was told it was from running high egt's; however Precision believes it's from a foreign object. I've also read on other forums of people running them this way with no problems. No signs of any leaking seals and very minimal shaft play. The compressor housing is polished. The turbo outlet is cut and I'm including a elbow with it so you can have it welded up for whichever way you need (since fmic piping setup may be different from car to car).
Turbo is being sold as is.
PRICE IS OBO!!!!
Selling a couple different ways-
$475 shipped for Turbo with fittings (-4 an oil feed fitting, 5/8th oil return flange, 2 banjo water fittings)
$425 shipped for Turbo without fittings
If you don't want the exhaust housing I'll take $50 off of either of the above prices.
I sent an email to Precision asking how much it would be to repair the turbo in the event someone wanted to.
Here is his response
Sean,
It is not very likely that your turbine wheel melted do to high egt's. It sounds like you had some type of foreign object go through your exhaust. In order to fix it you are looking at around $330. That is to just for the Turbine wheel and labor. If there are any other issues with the turbo the price can go up.
Thanks,
Wes Born
Precision Turbo Service Technician (http://zilvia.net/f/sale-items/309306-fs-precision-gt35r-t4-68ar-cheap.html)
(219) 996-7832
So essentially, someone could pick this up for $475 + $330 to repair. That would equal out to $805 for a GT35r with a fresh exhaust wheel and balance.
http://hondamarketplace.com/attachment.php?attachmentid=113900&stc=1&d=1268497073
http://hondamarketplace.com/attachment.php?attachmentid=113901&stc=1&d=1268497073
http://hondamarketplace.com/attachment.php?attachmentid=113901&stc=1&d=1268497073
http://hondamarketplace.com/attachment.php?attachmentid=113905&stc=1&d=1268497073
Thanks
Sean
Turbo is being sold as is.
PRICE IS OBO!!!!
Selling a couple different ways-
$475 shipped for Turbo with fittings (-4 an oil feed fitting, 5/8th oil return flange, 2 banjo water fittings)
$425 shipped for Turbo without fittings
If you don't want the exhaust housing I'll take $50 off of either of the above prices.
I sent an email to Precision asking how much it would be to repair the turbo in the event someone wanted to.
Here is his response
Sean,
It is not very likely that your turbine wheel melted do to high egt's. It sounds like you had some type of foreign object go through your exhaust. In order to fix it you are looking at around $330. That is to just for the Turbine wheel and labor. If there are any other issues with the turbo the price can go up.
Thanks,
Wes Born
Precision Turbo Service Technician (http://zilvia.net/f/sale-items/309306-fs-precision-gt35r-t4-68ar-cheap.html)
(219) 996-7832
So essentially, someone could pick this up for $475 + $330 to repair. That would equal out to $805 for a GT35r with a fresh exhaust wheel and balance.
http://hondamarketplace.com/attachment.php?attachmentid=113900&stc=1&d=1268497073
http://hondamarketplace.com/attachment.php?attachmentid=113901&stc=1&d=1268497073
http://hondamarketplace.com/attachment.php?attachmentid=113901&stc=1&d=1268497073
http://hondamarketplace.com/attachment.php?attachmentid=113905&stc=1&d=1268497073
Thanks
Sean