PDA

View Full Version : FL $6000 in parts sale! haltech/3071r/top mount/Blitz/DIF/Greddy/etc


greenman100
03-23-2010, 01:32 PM
Lots of parts have been piling up....

Pictured:
Brand new, never used Garrett GT3071r with polished compressor housing, 4" inlet - $1100
Brand new, never used Haltech Platinum Sport 1000 w/ manual, USB cable, and sticker - $1050
DIF fan controller, with all harness and spade connections. Ready for install. $110
Blitz FATT turbo timer, with all harness and spade connections. Ready for install. $60 SOLD
Cobra ESD-9550 Radar Detector w/suction cups and harness - $50
SAFC Harness - $10
HKS SSQV on hotpipe - $100 SOLD
Various hot/cold pipes - $10 each SOLD
S13 SR Exhaust cam - $20
Wiper Motor - $20
Window motor - $20
S14 door handle - $20
S14a kouki corner light, one tab broken - $20
S13 SR Alternator - $100
S13 SR Starter - $100
S13 SR Starter in need of rebuild - $30
S14 door locks (pair) with key - $20
S14 trunk lock w/o key - free with purchase of anything
S14 ignition lock w/key, you will need to save the non-keyed half of the assembly, i cut mine to get it off. - $20
S14 ignition switch, uncut pigtail - $20
20 Gorilla locks, key has gone missing but I have the code. New keys are $5. set of 20 - $50
Greddy SR20 88mm x 1.2mm headgasket, never used - $150
OEM SR20 HG, never used - $50
DEFI BF boost gauge, with sensor. reads in PSI. $200
DEFI BF EGT gauge, without sensor, reads in degF. $120
Full set of DEFi gauges with sensors, control unit, and seven 60mm gauge pod - Boost, EGT, Oil press, Oil temp, Water temp, Fuel press. All sensors are loomed and protected. With fiberglass molded gauge housing, $1200

http://i41.tinypic.com/5fqik2.jpg
http://i43.tinypic.com/33orx2c.jpg
http://i46.tinypic.com/2w6a2iu.jpg
http://i49.tinypic.com/35mqjyx.jpg

Not Pictured: (still installed on car, will remove when purchased, or in 1 month)
Top mount turbo setup - includes ramhorn style heat-wrapped manifold, synchronic wastegate, heatwrapped downpipe and dump tube. Downpipe has two O2 sensor bungs - $1200
Enthalpy tuned ECU - tuned for 740cc injectors, Z32 mafs, WC S14SR ECU/engine code - $300
Z32 MAFS - $100


Grand total: $6250. Buy it all, I'll give it to you for $6000, lol.

Don't waste my time with lowballs. I'm not itching for cash, and have plenty of time to wait for these parts to sell for what they're worth.

K_style
03-23-2010, 03:05 PM
woah.. that is a lot of gauges...

glws

ie3.0
03-23-2010, 04:04 PM
haltech for S14 w/ S14 SR?

greenman100
03-23-2010, 04:27 PM
haltech for S14 w/ S14 SR?


The haltech is universal - it will fit any 4, 6, or 8 cylinder engine. You will need to pick up a harness from haltech, around $200.

speedgod^s13
03-23-2010, 05:07 PM
I may be interested in some of those gauges, if you do later on decide to part out.

mpjustchilln
03-23-2010, 05:17 PM
price for drivers side window motor shipped to 92677?
email pls [email protected]

SWAT Team S14
03-23-2010, 05:52 PM
Yea...wow, how do u see out ur window? BF link gauges are really nice tho. & I would be interested, too if u decide to part them out...particularly the oil press gauge :P . Anyways, GLWS!!

greenman100
03-23-2010, 06:07 PM
I may be interested in some of those gauges, if you do later on decide to part out.

PM me an offer for what you want.

greenman100
03-23-2010, 06:10 PM
Yea...wow, how do u see out ur window? BF link gauges are really nice tho. & I would be interested, too if u decide to part them out...particularly the oil press gauge :P . Anyways, GLWS!!


I'm really tall and can see over them just fine. It was temporary while tuning my Haltech.

greenman100
03-24-2010, 12:04 PM
bump numero uno

copmagnet
03-24-2010, 12:34 PM
pm on ecu incoming

g-via
03-24-2010, 01:38 PM
do you have s13 sr20det intake pipe?

greenman100
03-24-2010, 02:55 PM
do you have s13 sr20det intake pipe?


All pipes are pending.

Krave
03-24-2010, 11:31 PM
I know you did not mention it but, do you have, by any chances, some 550cc or more injector that have been pilling out too?

greenman100
03-25-2010, 10:12 PM
I know you did not mention it but, do you have, by any chances, some 550cc or more injector that have been pilling out too?

nope! sorry.

greenman100
03-29-2010, 06:25 PM
bump numero dos

nissanman22
03-30-2010, 08:25 AM
priced shipped to 12919 for the turbo timer

greenman100
03-30-2010, 10:59 AM
priced shipped to 12919 for the turbo timer


Just sold.

sidewaysil80
04-02-2010, 05:39 AM
tried to pm you regarding haltech, but your inbox is full :/

greenman100
04-02-2010, 12:45 PM
inbox cleared.

greenman100
04-05-2010, 10:10 AM
bump numero dos

racerx2k1
04-05-2010, 01:59 PM
PM me an offer for what you want.

bump numero uno

bump numero dos

bump numero dos

2 bump limit. You can start new thread in 3 days.