GeneStarWindGSW
03-21-2010, 11:48 PM
Vehicle Description:
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/Cars/89%20Cress/IMG_0287.jpg
Miles: 60-70k on the motor
Price: 4.5k obo..Trades or Partout
Title Status: Clean
Location: Miami, FL
Contact: PM, 305-984-5103, AIM:XxT88SupraT88xX
-----------------------------------------------------
Vehicle Description:
Got a new car, don't have the time or money to finish this :(
It needs TLC and little things for it to be done and running once again like before :)
Engine/Drivetrain
1JZ-GTE /w 70k miles (block painted gold & Front sump)
JZX81 OEM mount brackets & 2JZ mount mounts
ARP head studs & new genuine Toyota 1JZ head gasket
2JZ-GTE waterpump conversion /w waterpump pulley
2JZ-GTE alternator /w lightweight pulley
Deleted A/C & P/S.
R154 Transmission (No Grinds)
1JZ Bellhousing & 1JZ resurfaced flywheel
Stage 3 - 6 Puck Sprung XTD Clutch
ARP flywheel bolts
2JZ JDM 440cc injectors
Walbro 255 fuel pump
NGK Iridium spark plugs
Divided T4 Manifold
Hybrid GT45 Turbo
Stainless Steel -4AN Turbo Feed Line
Stainless Steel -10AN Turbo Return Line
Stainless Steel Clutch Line
Stainless Steel Fuel Bypass Dampener Line
4" Downpipe (V-band)
3" FMIC (31x12x3")
HKS knockoff 50mm Wastegate (4 bolt)
3" IC Piping /w 4-ply silicon couplers
7M-GTE radiator
Gates Racing Radiator Hoses
New Fuel Filter
New Mobil1 Oil Filter + Water cooled
New Timing Belt
New Serpentine Belt
New Thermostat & Seal
ALL brand new gaskets & seals have been changed (Genuine Toyota 1JZ gasket Kit)
Suspension/Brakes
One-off Nissan Front spindle fabrication and rear strut mount modification to accommodate S13 240SX suspension. (Has KYB shocks /w H&R Springs.)
Welded Diff
Tein Tie-rod ends
Front 2 piston Q45 brake conversion /w slotted rotors
Stainless Steel Brake Lines
Electronics
1JZ Supra harness /w all electronics (MAP, Ignitor, IAT, TPS)
1JZ Supra Avance Tuned Auto ECU (Rev Limiter, Boost Cut and Fuel Cut removed)
Interior/Exterior
Sparco Sprint Bucket seat (Driver, Its Ripped and has a seat cover on)
Sound deadening removed & floor painted white
No Carpet (still have the old carpet though)
No Passenger seat (Have seat bracket if you buy a sparco seat)
A/C removed behind dash
Back seats are Installed
Custom welded harness bar
Cleaned up engine bay & painted white
Custom 4pc body kit
Panda 2-tone paint (Factory white with House of Color light gold flake on top, Nissan Super Black on the bottom)
(Things that needed for it to be finished and make the car run.)
BOV
Battery relocation
Electric Fan
Wastegate adapter (4bolt to 2bolt, since manifold is 2 bolt)
Fusebox wiring clean-up & Engine harness (Would suggest new supra harness because the one i currently have has been cut/chopped up)
Motor/Tranny/Diff Fluids
*Optional if wanted*
LHD Black Dash
16x7 gold meshie wheels
16x7 ARE wheels
18x8.5 zenneti wheels (pair)
1JZ/2JZ engine parts
Will not be included
SAFC
RHD swap
PLX Wideband
Prosport Oil Temp, Water Temp & Oil Press gauges
Coolant Filter /w lines & fittings
HKS SSQV BOV
Aeromotive AFPR /w Custom Fuel line Return
------------------------------------------------------
Additional Photos:
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/PICT0361-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/PICT0362-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/PICT0363-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0137-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0138.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0140.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0141.jpg
------------------------------------------------------
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/Cars/89%20Cress/IMG_0287.jpg
Miles: 60-70k on the motor
Price: 4.5k obo..Trades or Partout
Title Status: Clean
Location: Miami, FL
Contact: PM, 305-984-5103, AIM:XxT88SupraT88xX
-----------------------------------------------------
Vehicle Description:
Got a new car, don't have the time or money to finish this :(
It needs TLC and little things for it to be done and running once again like before :)
Engine/Drivetrain
1JZ-GTE /w 70k miles (block painted gold & Front sump)
JZX81 OEM mount brackets & 2JZ mount mounts
ARP head studs & new genuine Toyota 1JZ head gasket
2JZ-GTE waterpump conversion /w waterpump pulley
2JZ-GTE alternator /w lightweight pulley
Deleted A/C & P/S.
R154 Transmission (No Grinds)
1JZ Bellhousing & 1JZ resurfaced flywheel
Stage 3 - 6 Puck Sprung XTD Clutch
ARP flywheel bolts
2JZ JDM 440cc injectors
Walbro 255 fuel pump
NGK Iridium spark plugs
Divided T4 Manifold
Hybrid GT45 Turbo
Stainless Steel -4AN Turbo Feed Line
Stainless Steel -10AN Turbo Return Line
Stainless Steel Clutch Line
Stainless Steel Fuel Bypass Dampener Line
4" Downpipe (V-band)
3" FMIC (31x12x3")
HKS knockoff 50mm Wastegate (4 bolt)
3" IC Piping /w 4-ply silicon couplers
7M-GTE radiator
Gates Racing Radiator Hoses
New Fuel Filter
New Mobil1 Oil Filter + Water cooled
New Timing Belt
New Serpentine Belt
New Thermostat & Seal
ALL brand new gaskets & seals have been changed (Genuine Toyota 1JZ gasket Kit)
Suspension/Brakes
One-off Nissan Front spindle fabrication and rear strut mount modification to accommodate S13 240SX suspension. (Has KYB shocks /w H&R Springs.)
Welded Diff
Tein Tie-rod ends
Front 2 piston Q45 brake conversion /w slotted rotors
Stainless Steel Brake Lines
Electronics
1JZ Supra harness /w all electronics (MAP, Ignitor, IAT, TPS)
1JZ Supra Avance Tuned Auto ECU (Rev Limiter, Boost Cut and Fuel Cut removed)
Interior/Exterior
Sparco Sprint Bucket seat (Driver, Its Ripped and has a seat cover on)
Sound deadening removed & floor painted white
No Carpet (still have the old carpet though)
No Passenger seat (Have seat bracket if you buy a sparco seat)
A/C removed behind dash
Back seats are Installed
Custom welded harness bar
Cleaned up engine bay & painted white
Custom 4pc body kit
Panda 2-tone paint (Factory white with House of Color light gold flake on top, Nissan Super Black on the bottom)
(Things that needed for it to be finished and make the car run.)
BOV
Battery relocation
Electric Fan
Wastegate adapter (4bolt to 2bolt, since manifold is 2 bolt)
Fusebox wiring clean-up & Engine harness (Would suggest new supra harness because the one i currently have has been cut/chopped up)
Motor/Tranny/Diff Fluids
*Optional if wanted*
LHD Black Dash
16x7 gold meshie wheels
16x7 ARE wheels
18x8.5 zenneti wheels (pair)
1JZ/2JZ engine parts
Will not be included
SAFC
RHD swap
PLX Wideband
Prosport Oil Temp, Water Temp & Oil Press gauges
Coolant Filter /w lines & fittings
HKS SSQV BOV
Aeromotive AFPR /w Custom Fuel line Return
------------------------------------------------------
Additional Photos:
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/PICT0361-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/PICT0362-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/PICT0363-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0137-1.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0138.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0140.jpg
http://i21.photobucket.com/albums/b268/GeneStarWindGSW/DSCN0141.jpg
------------------------------------------------------