"overfenders, do you regret them" thread

[kalypso123]

Ultimately:

Is it worth molesting perfectly stock metal, for the sake of baller wheels.

[tryangle]

Best mod ive done, on both my cars, wider track more room for wheels and tire and most importantly the look lol. Just make sure its done well, rewelded and not cut too high without reinforcement.


Also make sure there baller or at least extra "funktional" wheels

[kalypso123]

yeaaaahhh... but,

koguchi and all the heroes did it with out,

I feel like overfenders are more part of american style.

[wh0aitznic0]

I dig overfenders when you need them to accomodate 18x11+'s.

If you have mint rear fenders, keep it OEM pulled.

BTW, how's the best S13's thread, Kalypso? :)

[ZilviaKid]

yeaaaahhh... but,

koguchi and all the heroes did it with out,

I feel like overfenders are more part of american style.
whuttt, but koguchi makes the illest overfenders ever dude.

[nathanong87]

if they are mint, keep em. 99.9% of wheels will come and go, but once u cut up fresh metal u are never going to have that rear 1/4 panel work.... realistically.

i cannot forsee myself going widebody until the 1/4 panels get fubar'd. with wider wheels/wide tires, u need other "things" too. on the power i'm making (or lack there of) i doubt i'd be able to spin 11s or 12s with reasonable rubber, no matter how ill they would look =(

(i'm on 10.5 stock metal now)

[Quail]

I wanted overfenders for quite a while, but lack of funds meant I couldn't go ahead (painting would of killed me). In the long run, I'm happy I stuck with flared stock metal. Its so hard to get fiberglass looking perfect.

[YoungGun]

"Pulls" are the worst ever.

[airhead]

Regret dont do it

[kalypso123]

BTW, how's the best S13's thread, Kalypso? :)

:hyper:

Regret dont do it

:wan:

[ILoveMyRHS13]

I feel like overfenders are more part of american style.
Because in Japan it isn't street legal to have widened fenders. :l101:

[aa87]

cry me a 1990 $400 japanese coupe stock fender purist river

[maplejesse]

I dig overfenders when you need them to accomodate 18x11+'s.

If you have mint rear fenders, keep it OEM pulled.

BTW, how's the best S13's thread, Kalypso? :)

that thread should be limited to certain people being allowed to post.

i hate doing a long post of awesome cars and then seeing some idiot post his veilside hatchback on steelies

[Om1kron]

"Pulls" are the worst ever.

disagree................

[GSXRJJordan]

With other cars (like my FD) there's a good reason to avoid overfenders - the stock body already 'looks' aggressive/wide... these cars look better with stock bodies lightly rolled and pulled.

With my S13 and later S14, the wide fenders make the car. I ran 18x10 +0 / 18x12 +0 and made the body to fit with modded Dmax rears and modded AIT fronts, and it came out aggressive as fuck. There's certainly something to be said for a clean stock body car, but I was extremely pleased with how wild and unique mine was (neither of which can be had with stock fenders).

If I had a pristine S-chassis and wanted to keep my wheels/tires around 9.5", I'd certainly do what Wayne did and run a little roll and pull for the super clean look - his car looks fantastic. Since most S-chassis cars are beat, people have no problem spending ~$200 on some nice clean fenders. My problem is with people that run overfenders, then spacers to get their craptastic 18x8 et35 wheels to meet the fenders - like Koguchi did. That shit is homo and rice IMO.

[pignose4life]

on my second hatch i figured why not im down for some fat ass rims in the back so i cut the rear fenders and put on some over fenders. At first it seemed pretty sick that you can fit extremely huge rims but when it was all said and done i was very unhappy with it. It just makes the car look like a POS cause you can see the shinny fiberglass fenders. I dont think its worth it unless the car is strictly track, if so then beat it to shit who cares.
just do a clean roll and pull then call it a day.

[GSXRJJordan]

on my second hatch i figured why not im down for some fat ass rims in the back so i cut the rear fenders and put on some over fenders. At first it seemed pretty sick that you can fit extremely huge rims but when it was all said and done i was very unhappy with it. It just makes the car look like a POS cause you can see the shinny fiberglass fenders. I dont think its worth it unless the car is strictly track, if so then beat it to shit who cares.
just do a clean roll and pull then call it a day.

There's a thing called paint. It makes those shiny fiberglass fenders look just like the rest of the car.

My attempt to save this thread - this is with three shades of flat black, unfinished bodywork (rush to get to trackday), but shows what purposeful widebody looks like. Car was in an accident shortly thereafter, never finished it.
http://public.bay.livefilestore.com/y1pX0VyhuCUGlc1OsUEMuQsJ6vSns1M6rIChsbfFkRbC1cOQrO trW7hKtXTVSVT87lazLNxwYsoVb7ToKiOF0bEIw/11.jpg

http://public.bay.livefilestore.com/y1pp6clbxMk8Cni6sXLjWYDqQLTtKz69xTJjARL_5v9qar5mim Y6Kn-Mdfjdo402wFsffIeagPdB44lW6lGD6iimA/IMG_7535.jpg

http://public.bay.livefilestore.com/y1plOoIbS4NSG9e5Zyeg1U3EVlQsHRz05cuAHMKpQMwbp9bw91 wIYqH-_TEXfWAHU_1IL07RT8hlgTwQRPwDrcOnA/IMG_7319.jpg

http://public.bay.livefilestore.com/y1pmjYBXSSroQB7RzdTO4BQ9BGelE2G39tIIUrJDwJd5jb4ZdC A2-i6yUXK326U79oDPSxH1ElVgLUTPkignt1iOQ/36.jpg

http://public.bay.livefilestore.com/y1pU9j-y-fzZviNe4pZ8JVsfErUXi8KJdRXJyq6EZsb5mGl4PsLlGK7uZEg F1aH0XcQ1MhwINsY7kaysN6jh8J5NQ/DSC05598?download

http://public.bay.livefilestore.com/y1pBLrQQ5gQy8q5HXGXEMNaEpiHubIQXhZPqCl1xcBgNZw71g0 A_3UlFn_xUfe6tVTUNoIAV5wIu4EOMz4Q9HlsPQ/DSC05586?download

[wh0aitznic0]

cry me a 1990 $400 japanese coupe stock fender purist river

Shut the fuck up.

[Bubbles]

I'm not sure who's side you're trying to benefit.




http://public.bay.livefilestore.com/y1pX0VyhuCUGlc1OsUEMuQsJ6vSns1M6rIChsbfFkRbC1cOQrO trW7hKtXTVSVT87lazLNxwYsoVb7ToKiOF0bEIw/11.jpg

[ESmorz]

cry me a 1990 $400 japanese coupe stock fender purist river

You win the thread.

http://i39.tinypic.com/2dw6uk2.jpg

[kalypso123]

that thread should be limited to certain people being allowed to post.

i hate doing a long post of awesome cars and then seeing some idiot post his veilside hatchback on steelies

I hate it too, but

real recognize real. we cant stop others from posting... but i do drop a cool bomb once a while.

and so do you.... zilvia still doesnt have anything like that thread.

it would be better on this formus.

With other cars (like my FD) there's a good reason to avoid overfenders - the stock body already 'looks' aggressive/wide... these cars look better with stock bodies lightly rolled and pulled.


ya... and For type-X... I can see the stock fenders being a bonus.

it seems to flow better.

[ESmorz]

I hate it too, but

real recognize real. we cant stop others from posting... but i do drop a cool bomb once a while.

and so do you.... zilvia still doesnt have anything like that thread.

it would be better on this formus.

Kanagaroo shit with macaroni wheels and a folgers exhaust would be better here than there. Not that that's saying much.

In any event if you are thinking you might regret it, you probably will... and for some 2006 lingo "real talk homie".

[Om1kron]

pics of my car
http404:Paint not found....

Is anyone else getting this damned error???

[InlineS13]

Boo overfenders.
http://i44.tinypic.com/szxt2p.jpg

[kalypso123]

http404:Paint not found....

Is anyone else getting this damned error???

brutal :rofl:

[GSXRJJordan]

I'm not sure who's side you're trying to benefit.

Showing that the lines compliment the car, looks aggressive, and not like a mid 90s shitbox like the stock S14 does. I don't give a shit what any of these guys do lol. I love that car's lines.

http404:Paint not found....

Is anyone else getting this damned error???

Love you. Wayne's been giving me shit about flat black for years now.

[az_240]

Not usually a fan of overfenders... a good pull is best IMO

[thestreetzking]

i did it because it looked like 2 people backed into my car at the same time on each side. But 30s not 50mm

[PoorMans180SX]

I think there are cars that look good both ways...

But I feel like I would hate fiberglass front fenders. Always getting notched and broken by the tires rubbing.

If I ever go widebody, I'll be having custom metal front fenders made. Really.

[Om1kron]

I think there are cars that look good both ways...

But I feel like I would hate fiberglass front fenders. Always getting notched and broken by the tires rubbing.

If I ever go widebody, I'll be having custom metal front fenders made. Really.

I don't mind the fiberglass front fenders I have (which are wider, duh) but I wish someone would design some impact absorbent mounting hardware for them.

[tryangle]

Shut the fuck up.
Damn bro you mad? Question here is are you making a racecar or are you building a cruiser outta mostly race parts? If it wasn't for us these thing would be in the trash.

http://i24.photobucket.com/albums/c26/turbomigo/DSC_0034.jpg

[FusionR240sx]

i'm doing it cuz the rear has crusty rusty spots.

[wh0aitznic0]

Damn bro you mad? Question here is are you making a racecar or are you building a cruiser outta mostly race parts? If it wasn't for us these thing would be in the trash.

Shut the fuck up.

[Csomme]

Shut the fuck up.

lol

PREMIE SMASH!

[fishhouse]

kinda wish i stuck with stock metal. my drivers quarter was pretty fucked up but still kind of wish i fixed it instead of doing the overs. oh well. and that s14 looks like ass. bad example

[lflkajfj12123]

overfenders are pointless

buy wheels with correct offsets and you wouldn't have any problems in the first place

s13 can fit a 10 inch wide rim on stock body with a little bit of work

s14 can fit ridiculous sizes

only car i think that ever looked good in over fenders is prob Siizzzoooo or Chmercer

http://i21.photobucket.com/albums/b260/sizzo2/Paint%20Job/IMG_0982.jpg

http://img.photobucket.com/albums/v479/chmercer/IMG_0720.jpg

[Csomme]

personally, I like the look of widebody. So that's why I'll do it. I don't give a shit about "ruining" good stock panels on my 240. If something happens I'll just pick up another shell and do it all over again.



I should clarify that I mean if something happens to the car itself, not fucking it up putting fenders on. (for the less intelligent)

[saruz]

very nice, love how clean it looks with rolled fenders
http://i44.tinypic.com/szxt2p.jpg

[widebodyseven]

On a 240 i wouldn't regret going widebody but i did kinda regret doing it on my old car a FD.

[kris]

I think there are cars that look good both ways...

But I feel like I would hate fiberglass front fenders. Always getting notched and broken by the tires rubbing.

If I ever go widebody, I'll be having custom metal front fenders made. Really.


You can pull stock fenders about 15mm without it looking much different at all, I have done it. Heat and patience. Was kinda chapped when I put on my 20mm front overs and the wheels fit about the same.


I could give a crap less about my 20yr old car--it was 50 bucks to begin with so why not cut the crap out of it, plus the way i put it to use its obvious its not gonna stay pristine for very long.

If i had a pristine s14 kouki I would probably not hack it all up--unless of course i got it for an initial cost of 100 bucks or less. turns out i have a shitty S13

[sidewaysil80]

it's a pita and since going to fiberglass front fenders i still can only get my bumper to line up like 98% perfect BUT imo a full widebody on hatchs make them time less. it completley rejuvinates the car...so with that being said no, i dont regret them at all!

[NSR250]

Boo overfenders.


X2

http://jackchou.com/underconstruction/s14GMR01.jpg

[nathanong87]

dont get me wrong, i actually like the look of cars with widebody, but it will take alot of convincing to cut the panels i have now =(

[GripTerror]

Boo overfenders.
http://i44.tinypic.com/szxt2p.jpg

hello my secretary, have you gotten the papers ready for my meeting? No, okay if you don't I will report your womenly car to security and ban it from my company's parking lot. People already complain about your lack of parking skills. Now get to work woman!

X2

http://jackchou.com/underconstruction/s14GMR01.jpg
Hello bob, how's hitting 50 feel? I heard you got a car that you tried to run along with them younglin's? I guess it helps with the lack of manhand with man-o-pause and ed. Viagra always helps but a secretary's car with boyhood wanabeness doesn't help.

See ya around bob

[GripTerror]

oh hai,

i like over fenders and wyyyde

http://jonsibal.com/bpimages/s14dub_3.jpg

[YucA]

Pfft who wants cheesy FG fenders!? Transparent aluminum is where its at!

http://www.gamefeil.com/uploaded_images/scotty-767813.jpg

[GripTerror]

lol those were great classics man

[lflkajfj12123]

hello my secretary, have you gotten the papers ready for my meeting? No, okay if you don't I will report your womenly car to security and ban it from my company's parking lot. People already complain about your lack of parking skills. Now get to work woman!


Hello bob, how's hitting 50 feel? I heard you got a car that you tried to run along with them younglin's? I guess it helps with the lack of manhand with man-o-pause and ed. Viagra always helps but a secretary's car with boyhood wanabeness doesn't help.

See ya around bob

Not funny.

[rhd_sw20]

Overfenders are practical.

I have em on my s13 because I bought it with damage on the rear 1/4s. It was an easy fix, and looks great.
My s14 on the other hand, Had nice fitment on stock body, until my buddy backed into my rear 1/4 panel now. Now, Ill probably end up doing overfenders in the back because to me, It makes more sense to buy new rear fenders for $300 than spend $1000 at a body shop to fix the dents. Of course I would need to get new wheels to fit, which is the dilemma.

It comes down to look in the end tho.

Do you want the look of widebody and widened fenders?
Then get over fenders
If you like stock look?
Keep your stock fenders.

I like em both depending on chassis.

Overs:
http://i83.photobucket.com/albums/j304/itsasoldasme/IMG_2977.jpg
Stock Body: not an s-chassis but you get the idea.
http://i83.photobucket.com/albums/j304/itsasoldasme/SANY1120.jpg

[BustedS13]

hmm
which is more attractive to you:
this clean s14

http://i44.tinypic.com/szxt2p.jpg

or this garbage scow

http://public.bay.livefilestore.com/y1pX0VyhuCUGlc1OsUEMuQsJ6vSns1M6rIChsbfFkRbC1cOQrO trW7hKtXTVSVT87lazLNxwYsoVb7ToKiOF0bEIw/11.jpg


anyway, i really don't see why you all think you need 11" tires for 200 horsepower.

[sidewaysil80]

hmm
which is more attractive to you...
anyway, i really don't see why you all think you need 11" tires for 200 horsepower.

ok to be fair though, i can find a bunch of shitty stock bodied 240's and compare them to dope wide body ones and obviously its a no brainer which looks better. but what it comes down to is personal preference...i prefer the wide body look and you might not. but i really see ABSOLUTLEY no down sides to going widebody. all in all it increases the looks of the car and seperates it from the run of the mil stock bodied 240's you see everywhere.

[GSXRJJordan]

anyway, i really don't see why you all think you need 11" tires for 200 horsepower.

You don't. You need it when you build a RB25 and buy a 66mm turbo and twin scroll manifold for it.

In all honesty I bought the wheels first, went widebody next, then built the motor, but I really enjoyed the car as a whole. Great package, just needed paint.

[FusionR240sx]

hmm
which is more attractive to you:
this clean s14



or this garbage scow


that was the worst comparison you could do.
i would post mine up and then post a clean over'd s14.

honestly that was stupid as hell.
if that car was painted it would look just as good.
even better to me cuz i don't like TE's.
even if i could afford them i wouldn't get them.
the wheels on the unpainted missmatched flat black s14 looks better to me.

[dato]

hmm
which is more attractive to you:
this clean s14

http://i44.tinypic.com/szxt2p.jpg

or this garbage scow

http://public.bay.livefilestore.com/y1pX0VyhuCUGlc1OsUEMuQsJ6vSns1M6rIChsbfFkRbC1cOQrO trW7hKtXTVSVT87lazLNxwYsoVb7ToKiOF0bEIw/11.jpg


anyway, i really don't see why you all think you need 11" tires for 200 horsepower.

dude, common... I know u are trying to make a point. It's like saying u want to drive a Ferrari or a Honda??? It's obvious that the 2 cars are for different styles of driving... But I bet if he has his car painted, that thing would look very nice!!!!! And ur comparison will be useless

[Om1kron]

You don't. You need it when you build a RB25 and buy a 66mm turbo and twin scroll manifold for it.

In all honesty I bought the wheels first, went widebody next, then built the motor, but I really enjoyed the car as a whole. Great package, just needed paint.

Dont waste time defending the s14, I have super cock envy over your rx7 sir. If I didn't love my s14 so much I'd honestly consider a trade lol.

[yabeet]

My left rear quarter panel is rusted so Ive got 30mm Tatakidashi Origins on the way.
I originally pulled em, one side worked out great and the other side... well thats how I discovered the rust. :'(

[rb25crazy]

oh hai,

i like over fenders and wyyyde

http://jonsibal.com/bpimages/s14dub_3.jpg


any more info on this car? i love how it looks. would love to get a better look at it thanks!

[udon!]

overfenders look good on coupes

http://www.violentrunning.squidd.org/news/wp-content/uploads/2009/06/img00167-666x500.jpg




stock metal looks good on hatchbacks
http://ll.speedhunters.com/u/f/eagames/NFS/speedhunters.com/Images/Mike%20Garrett/1December/NZ%20Drift/nz2.jpg



s14 can pull both off

http://ll.speedhunters.com/u/f/eagames/NFS/speedhunters.com/Images/Jacco%20Willemsen/Top%20S14/S14%20Harte.jpg

http://farm3.static.flickr.com/2594/4111716756_bfd70a2178_o.jpg

[Om1kron]

oh hai,

i like over fenders and wyyyde

http://jonsibal.com/bpimages/s14dub_3.jpg

error http:404 : overfenders not found.

Those are called "FENDER FLARES"

[udon!]

lol. wtf kind of licence plate is on that car anyways?

[InlineS13]

Oh yea, that grey S14 has 10.5" wide TEs and 265's in the back. Also, a 500hp 2J

[rb25crazy]

Oh yea, that grey S14 has 10.5" wide TEs and 265's in the back. Also, a 500hp 2J

any idea on offset? or how much he pulled? i love the stance of that car as well.

[InlineS13]

I'm pretty sure it's +12 or +15. The fronts are just rolled with 9.5" +12 and the rears don't have a crazy pull. S14's have a nice flare from the factory, much different from S13's.

[zorak]

this thread reads like some Johnathan Swift.

[BustedS13]

just so we're clear

11" wheels + 200 whp sr20 = makes sense

[ILoveMyRHS13]

just so we're clear

11" wheels + 200 whp sr20 = makes sense
Only when you run 8* of camber. :ghey:

[Kouki_monstr]

I like overfenders, but im glad i was able to make my setup work otherwise i know i would have been posting in here for a diffrent reason..

18x10.5 -14 on stock
http://i5.photobucket.com/albums/y200/ps13drifter44/Picture096.jpg

[C-unit]

stock fender > cheapo FG overfender.

This is why I start my project from a GTR instead of a GTS..FG suck shit

[bl3ujay07]

overfenders look good on coupes

http://www.violentrunning.squidd.org/news/wp-content/uploads/2009/06/img00167-666x500.jpg
]

yeah, but the exhaust/muffler tip makes it look gay as hell.

[kalypso123]

kyle picked a great color,

metallic paint, ( like joshes 180 ) show the ripples in the fiber glass more.

[svensko]

Overfenders look tacky but that's never stopped anyone here before.

[svensko]

lol. wtf kind of licence plate is on that car anyways?

Looks to be arabic. It's probably somewhere in UAE.

[udon!]

just so we're clear

11" wheels + 200 whp sr20 = makes sense

it looks cool.

[Avante]

http://img.photobucket.com/albums/v299/ted_ni/etc/DSC_3187.jpg

over fenders are awesome!

[Om1kron]

lol wtf Ted your car has rear overs?

[s13dan]

It seems there are two styles here. You like body kits and over fenders, or you dont. Two very diff tastes here. I prefer the more stock look with baller wheels.

[Avante]

lol wtf Ted your car has rear overs?

Lol yeah man... How do you think I was able to fit 18x10 -16s in the rear? Not on stock metal fenders!

I actually molded mine on... So you can't really tell anywaysss.

<3

[Om1kron]

I have +13's under mine. 10 inches wide... =P but your shit is clean, I like how the paint stayed on your front bumper haha.

[Kouki_monstr]

Lol yeah man... How do you think I was able to fit 18x10 -16s in the rear? Not on stock metal fenders!

I actually molded mine on... So you can't really tell anywaysss.

<3

It can be done.. Im 18x10.5 -14 on stock. Never the less your shit looks good.

[lazysk8er2]

ok so do people dislike the widebody FG because its not as durable as the stock metal. i personally like it if they do it nicely no lame shortcuts.

ive never ran any kits but lots of pics always show the front bumper cracked and ziptied. ive never seen a Rear cracked overfender. how would you go about replacing it anyway?

[GSXRJJordan]

ok so do people dislike the widebody FG because its not as durable as the stock metal. i personally like it if they do it nicely no lame shortcuts.

ive never ran any kits but lots of pics always show the front bumper cracked and ziptied. ive never seen a Rear cracked overfender. how would you go about replacing it anyway?

Cracked rears happen when you drift into things, like other cars. Or when a rear tire gets too hot and the tread separates and eats your sideskirt, rear bumper, and overfender.

You drill out the rivets and rivet a new one on.

[lazysk8er2]

haha in my head i just think about those asshole that let the shopping carts fly into your cars.

also i think about the saturn commercials where everyone beats the shit out of them and no dings occur.

[kalypso123]

overfenders are pointless

s13 can fit a 10 inch wide rim on stock body with a little bit of work


yup... 18 x 10 -9 in the back.

http://www.rimtuck.com/photos/1244960739.jpg

http://www.rimtuck.com/photos/1244960832.jpg

[kalypso123]

If I could do pulls like this, I would never buy overs...

( assuming I ever buy 11 or 12" wheels)

http://i614.photobucket.com/albums/tt228/kalypso345/superneat180a-2.jpg

[str33tprintz]

I donno i'm in love with MOLDED overfenders I think it achieves that wide look while still looking somewhat oem.

http://i321.photobucket.com/albums/nn377/RPS13-604/SPT_37251.jpg

[str33tprintz]

yeah I just quoted doyle4281 (http://zilvia.net/f/members/doyle4281.html)

http://origin-lab.com/blog/wp-content/uploads/2009/06/oam2009_ph009b.jpg

http://origin-lab.com/blog/wp-content/uploads/2009/06/oam2009_ph013b.jpg

http://origin-lab.com/blog/wp-content/uploads/2009/06/cip11.jpg

http://origin-lab.com/blog/wp-content/uploads/2009/06/mikes14.jpg

http://origin-lab.com/blog/wp-content/uploads/2009/08/mks1.jpg

http://origin-lab.com/blog/wp-content/uploads/2009/08/mks7.jpg

[kalypso123]

...that still doesn't champion you're cause.

http://driftwolrd.com/dw/1162.jpg

[RB24_S14]

Here it goes, if you want to drift it go with over fenders. If your into show pull them. I think molded over fenders are baller when you have sick wheels.

[punxva]

lol

PREMIE SMASH!

ummmm yeah premie smash right back guys... thats my roommate both cars running overs and no regrets...

http://i24.photobucket.com/albums/c28/punxva/body%20work/DSC_0003-1.jpg

http://i24.photobucket.com/albums/c28/punxva/Devos%20shoot/DSC_0032.jpg

http://i24.photobucket.com/albums/c28/punxva/Devos%20shoot/DSC_0024.jpg

[roboticnissan]

i vote pulled ftw!!!!

[illvialuver]

well I think either can look good, just like any car can look good if you do it write, depending on your taste. I think Ill end up going with overs just because I love the way the dmax rears look on 14s, and I think with a major rolln pull it makes the little buldge right above the rear wheel look like it does not belong. That is just my opinion, but then again I like stock body 14s a lot, about as much as I like moded body work on 14s. I want to see pics of both rolled and pulled and overs, but the best examples, like the car has to have paint. And I used to hate molded fenders, but I think some of the examples shown here, are growin on me.

[kalypso123]

fuck molding,

I love the look of metal rivets after fresh paint!

http://i103.photobucket.com/albums/m154/hyperlemondc2/DSC_0073.jpg

raw

[Avante]

looks cheap, imo.

spend all that cash on nice wheels, nice paint, all the doo-dads...

and then rivet on over fenders?

...

if you drift your car, cool, i understand. quick fix.

but if you dont...

it just looks like homo.

[Avante]

It can be done.. Im 18x10.5 -14 on stock. Never the less your shit looks good.

yowzer. i adore you. really. thats pretty gangster.

but i have 19x10 +5s on the rear now, so i guess the over fenders came in handy, no?

[kalypso123]

overfenders look good on coupes

stock metal looks good on hatchbacks



I think the oppositte holds true also.

http://fatlace.com/lacedup/wp-content/uploads/2008/07/illest_chi2.jpg


http://i614.photobucket.com/albums/tt228/kalypso345/DSC00077-3.jpg

even w/ the quarter panel dent

[kalypso123]

looks cheap, imo.

spend all that cash on nice wheels, nice paint, all the doo-dads...

and then rivet on over fenders?



cars with over fenders look thick and juicy.

especially when the rim still meets the fender.

[tricky_ab]

It seems there are two styles here. You like body kits and over fenders, or you dont. Two very diff tastes here. I prefer the more stock look with baller wheels.

I'm just waiting for the "team body kits" and "team stock body" pictures and chants...For me, either options can look amazing if the TOTAL package is there...

[fckillerbee]

fuck molding,

I love the look of metal rivets after fresh paint!

http://i103.photobucket.com/albums/m154/hyperlemondc2/DSC_0073.jpg

raw

that is a gorgeous color! what is it?

[lflkajfj12123]

^ its a secret lol

i think rivets look like shit

mold em charlie mercer style

[RurouniMidnight]

personally im a fan of stock rolled fenders gives that clean look but still aggressive, but sometimes i think my car looks skinny in some picstures haha, ive been contemplating getting front and rear overs but i think im going to just stay with stock metal cause i don't want to have to deal with front fenders cracking while drifting and having to repair them, also i dont want to cut up my rear quarter panels right now, maybe later down the road i dunno well see.

[ILoveMyRHS13]

^ its a secret lol

i think rivets look like shit

mold em charlie mercer style
I haven't seen too many pictures of his car but they look to be rivited/screwed on in this picture.
http://img.photobucket.com/albums/v479/chmercer/IMG_0720.jpg

[Homer_Simpson]

oh hai,

i like over fenders and wyyyde

http://jonsibal.com/bpimages/s14dub_3.jpg
Those are custom metal fenders fronts as well as rears. Not fiberglass overfenders.

[MavericStephenc]

Those are custom metal fenders fronts as well as rears. Not fiberglass overfenders.

are there any more pictures of that car though?



Overs FTW

[Homer_Simpson]

are there any more pictures of that car though?



Overs FTW
Yes, there's a whole thread that he made over at Nissanroadracing.com.

IMHO, that's ^^ is the only way it should be done.

[lflkajfj12123]

I haven't seen too many pictures of his car but they look to be rivited/screwed on in this picture.
http://img.photobucket.com/albums/v479/chmercer/IMG_0720.jpg

that picture is from like 06

so is this one

http://img121.imageshack.us/img121/6403/img05834yl.jpg

his car is black/dark green with 18x13 18x11 equips and front flares

the rear overs and front flares are molded

http://gallery.me.com/corey.elliott/100161/IMG_3498/web.jpg?ver=12434833510001

[Bubbles]

That rear wheel looks awesome.

[wh0aitznic0]

Honestly, do you NEED a 13" wide wheel?

No, but shit looks pretty HOT.

[boost]

yeah, because all of our cars should look the same, you guys should really figure out the rules of how a 240 should look. :ghey:

[SxMachine]

Sorry but im not sold on the overs. I keep hearing this word "aggressive" thrown around but I dont see it. I see fragile fiberglass parts barely hanging on to frames that every1 and their mom swears by. Not that ALL of em look bad but alot of em look like shit. I'd rather waste money on my performance and spew aggression at the crank. Just my 2 cents

[lflkajfj12123]

yeah, because all of our cars should look the same, you guys should really figure out the rules of how a 240 should look. :ghey:

Everyone's car should look like Charlie Mercers.

[Bubbles]

yeah, because all of our cars should look the same, you guys should really figure out the rules of how a 240 should look. :ghey:


He's right.

All along I've been so sure that I never noticed it.



13 inch chrome equips look like shit compared to stock steelies.

[wh0aitznic0]

Sorry but im not sold on the overs. I keep hearing this word "aggressive" thrown around but I dont see it. I see fragile fiberglass parts barely hanging on to frames that er1

I stopped reading here.

[kalypso123]

sometimes molding looks wavey tho...

thats why i like the rivets to just hang out @[email protected]

[95KA-Turbo]

I have a pull for now....but I could go way crazier with my lips and run widebody. I can't make my mind up.

Current pull:
http://knoop.sumospeed.com/wp-content/uploads/2010/02/blog-pull7.jpg

When it was running last:
http://farm3.static.flickr.com/2589/3948969057_33273ba72a_o.jpg

http://farm4.static.flickr.com/3460/3949742774_b0b4ff9db7_o.jpg

17X10 +7 and 17X11 +12 if you don't frequent the wheel whore thread.

[wh0aitznic0]

If you wanna go crazier, get 18's in the rear!

[95KA-Turbo]

Haha, I want to build a set of 18s....but they're about 4 times what I paid for my 17s at a base price, I don't think anyone makes lips so I'd have to get extra custom ones - since the lips on there are custom already, haha.

[Avante]

Everyone's car should look like Charlie Mercers.

...negative

no one's car should look like charlie mercer's.

...unless you're into rolling around in a garbage pile.

[kalypso123]

3 things...

- bare rivets ftw. (molding sucks )

- stock metal fronts ftw.

- 30mm > 50mm

[kalypso123]

the lips on there are custom already, haha.

Kodiak? {msg}

[SxMachine]

I stopped reading here.

Huh? I dont get it

[OBEEWON]

Fenders should be made out of metal because fat people like leaning on cars.

I would buy some metal overs.

[Om1kron]

no one's car should look like charlie mercer's.
no one's car should look like charlie mercer's.
no one's car should look like charlie mercer's.
no one's car should look like charlie mercer's.
no one's car should look like charlie mercer's.


LY5DbN1riWQ

church!!!

[Om1kron]

Honestly, do you NEED a 13" wide wheel?

No, but shit looks pretty HOT.

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-12-16/2009-12-16016.jpg (http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-12-16/2009-12-16016.jpg)

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-12-16/2009-12-16017.jpg (http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-12-16/2009-12-16017.jpg)

http://farm4.static.flickr.com/3643/3416609904_83434d3911_o.jpg

coolest wheels i've ever seen, but they didn't even fit under the massive over fenders on this car, the stretch was godamned ridiculous. The owner GABES14 said the car handled like dog balls... and it has since been totaled since I've taken these pics in december.

[Corbic]

http://farm4.static.flickr.com/3643/3416609904_83434d3911_o.jpg

coolest wheels i've ever seen, but they didn't even fit under the massive over fenders on this car, the stretch was godamned ridiculous. The owner GABES14 said the car handled like dog balls... and it has since been totaled since I've taken these pics in december.


Yeah, that shit belongs on a H2.

[Om1kron]

if they had them in smaller sizing and still were made, i'd rock them.

[PoorMans180SX]

the rear overs and front flares are molded

http://gallery.me.com/corey.elliott/100161/IMG_3498/web.jpg?ver=12434833510001

Bodywork looks like a butthole full of dicks.

[Om1kron]

Bodywork looks like a butthole full of dicks.

with dicks spilling out...

example of doing it right.

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-08-27%20-%20it%20begins/2009-08-27-015.gif (http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-08-27%20-%20it%20begins/2009-08-27-015.gif)

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-08-27%20-%20it%20begins/2009-08-27017.jpg (http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-08-27%20-%20it%20begins/2009-08-27017.jpg)

the reason why the bridge metal is small sectionals is so it makes the gap stronger from the metal I had to remove to pull the fender.

then body smooth that bitch with filler. I also put weather sealant over the welding once everything was cleaned up, then I put undercoating on both sides as well so it's rust free and no water in my car.

end result.

pre spacers
http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2010-01-04%20-%20spacers/2010-01-04002.jpg (http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2010-01-04%20-%20spacers/2010-01-04002.jpg)

post spacers
http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2010-01-07%20done/2010-01-07012.jpg (http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2010-01-07%20done/2010-01-07012.jpg)

[RurouniMidnight]

^Damn thats lovely

[reccakun08]

om1kron that looks nice. looks like a pita though. retaining metal fenders is cool though.

[Homer_Simpson]

Bodywork looks like a butthole full of dicks.
Saw it in person and it was indeed a buthole full of dicks.

[lflkajfj12123]

...negative

no one's car should look like charlie mercer's.

...unless you're into rolling around in a garbage pile.

YOU TAKE THAT BACK ASSHOLE.

mercers car's body work isn't done last time i talked to him

one of the overfenders cracked when the car fell off the jack

so it needs to be finished and painted

WORD UP DICKHEADS

[soreballz]

^You're slacking, s0ap.

[lflkajfj12123]

dude i can't call anyone f*****s i'm going to get banned again

[ESmorz]

I feel like it's been years since that summer we spent holding hands and drawing unicorns.

The times have changed you.

[lflkajfj12123]

damn 　　　　　　　　　　

[kalypso123]

new summer on the way!

this guy, skipped the pull and overs all together.... ?

http://www.rimtuck.com/photos/1230095200.jpg

[Om1kron]

I don't understand what you're saying.

[bradass]

yea, i pretty much cried when i chopped up my nice stock body when i was building my car...it was a painful process and i wish i could've had a nice roll and pull instead...but at the end i was happy when i finished my car...

http://img718.imageshack.us/img718/1889/zdsc0022.jpg

http://img190.imageshack.us/img190/8048/zdsc0034.jpg

http://img41.imageshack.us/img41/7108/zdsc0077.jpg



http://img168.imageshack.us/img168/6816/zdsc0981.jpg

http://img705.imageshack.us/img705/7885/zdsc1115.jpg

[X2daC]

Please refer to post #138 how to do this the right way.

Please refer to post #123 how to do this the wrong way.

[illvialuver]

indeed that looks nice. good work. That bag full o dicks looked pretty good too. wow that just sounds bad.

[TurboSE]

Nice work Bradass, did you just fold those metal "tabs" up over the fender and weld them there? Can't quite see in the bottom pic...very nice though...

PS - I vote for overs.

[hailandkill]

bradass -- more pics of that car please.

i don't like rpf1's much but your car looks fucking great with em

[OBEEWON]

Sunken gas door is so cool.

Reminds me of thicky thick girls with bird chests. :eek3:

[fckillerbee]

Sunken gas door is so cool.

Reminds me of thicky thick girls with bird chests. :eek3:

what????? lol....picture to reference maybe?

[kingkilburn]

post #123 is fine as long as a panel was welded back in underneath the over fender.

[bradass]

Nice work Bradass, did you just fold those metal "tabs" up over the fender and weld them there? Can't quite see in the bottom pic...very nice though...

PS - I vote for overs.

yes, the tabs were folded over....hammered flat and welded.

http://img12.imageshack.us/img12/6140/zdsc00488.jpg

http://img179.imageshack.us/img179/6547/zdsc0051.jpg

http://img12.imageshack.us/img12/7900/zdsc00566.jpg

bradass -- more pics of that car please.

i don't like rpf1's much but your car looks fucking great with em

thanks man...

http://img716.imageshack.us/img716/2694/zzdsc0639.jpg

http://img199.imageshack.us/img199/1568/zzdsc0590.jpg

here's my friend's car...50mm origin rears

http://img405.imageshack.us/img405/6738/jared003a.jpg

http://img214.imageshack.us/img214/9503/jared092a.jpg

[kingkilburn]

There are some great cars on both sides.

http://i72.photobucket.com/albums/i170/tdi520/240sx/132.jpg

http://www.turbotimelounge.us/albums/shane/agq.jpg

http://img.photobucket.com/albums/v344/gsracer/VH%20POWER/IMG_5404.jpg

Same car as the emerald zenki. You can see a good pull and well done overs on the same car with the same wheels.

http://img.photobucket.com/albums/v403/kingkilburn/IMG_7017.jpg

http://img.photobucket.com/albums/v403/kingkilburn/IMG_7014.jpg

http://img.photobucket.com/albums/v403/kingkilburn/IMG_3588.jpg

[franklin93zx]

new summer on the way!

this guy, skipped the pull and overs all together.... ?


Anyone else wondering what the hell he's trying to say here?

[wh0aitznic0]

The black hatch on RPF-1's and Blue hatch on VSKF's are shitting on this thread.

[PRADOgy]

i think they look good only on certain cars. Cars that aren't as wide . Ae86,sa22c/fb,s13. Cars that come/look a little wider already don't need them fc,fd,s14/15 etc.

[ESmorz]

Anyone else wondering what the hell he's trying to say here?

I think it was some attempt at being funny in response to this...

I feel like it's been years since that summer we spent holding hands and drawing unicorns.

The times have changed you.

Could be wrong.

[lflkajfj12123]

could be penis

[ESmorz]

Shut up chicken nugget.

[Bubbles]

I ain't cutting up my car to fit some RPF1's.

[franklin93zx]

Hmm so it's between penis, chicken nuggets, and a failed attempt at being funny....

[Avante]

YOU TAKE THAT BACK ASSHOLE.

mercers car's body work isn't done last time i talked to him

one of the overfenders cracked when the car fell off the jack

so it needs to be finished and painted

WORD UP DICKHEADS

NO!

lol.

still looks like a butthole full of dicks.

i stand by my statement.

[kalypso123]

I don't understand what you're saying.

I meant... this guy said fuck-it to the whole debate, and let hang out regardless.

http://www.rimtuck.com/photos/1230095216.jpg

[eds13]

The black hatch on RPF-1's and Blue hatch on VSKF's are shitting on this thread.


yes, yes it is. i <3.

i've thought about going widebody but, i dont feel that need to ruin me quarter panels that much...

[kalypso123]

The black hatch on RPF-1's and Blue hatch on VSKF's are shitting on this thread.

not quite bro, slow down.

http://www.matejblahut.com/gallery/d/1169-1/typechicago1.jpg

http://i219.photobucket.com/albums/cc167/kalypso678/18x1010r.jpg

http://carview-img02.bmcdn.jp/carlife/images/user/406699/p1.jpg

http://img01.carview.co.jp/minkara/blog/000/017/252/212/17252212/P1.jpg

stock fender metallics

[OBEEWON]

Those first two need buff jobs so hard.

[franklin93zx]

I meant... this guy said fuck-it to the whole debate, and let hang out regardless.


Well actually if you look close enough right above the rear wheel it appears that he pulled his fenders....

[soreballz]

^No shit. What he meant was that that car NEEDS them, but he skipped them in favor of Mexicali-spec fitment.

[OBEEWON]

http://i704.photobucket.com/albums/ww50/Theokhoth/rightoveryourhead.gif

[s14unimog]

looks cheap, imo.
spend all that cash on nice wheels, nice paint, all the doo-dads... and then rivet on over fenders?...if you drift your car, cool, i understand. quick fix. but if you dont... it just looks like homo.

And how might one install overs instead? Props for keeping the rivets un-painted... Painted always looks terrible...

I vote rolled/pulled b/c I know my S14 can take big tires. Either way, the only reason to regret doing either is after one does a half ass job... I've seen terrible pulls and terrible overs..and the opposite

[franklin93zx]

^No shit. What he meant was that that car NEEDS them, but he skipped them in favor of Mexicali-spec fitment.
Well that makes more sense then how he was trying to make people figure out

[fckillerbee]

I have rolled fenders, but I prefer the wide body look....I think it looks more "race" appropriate. But for daily driving, rolled fenders=flushness.

[kalypso123]

I think using stock fenders is more tasteful.... that's what i've gotten out of this thread.

I'll avoid over fenders throughout the lifespan of my car.

[Bubbles]

WTF.

I quit.



http://img01.carview.co.jp/minkara/blog/000/017/252/212/17252212/P1.jpg

[tryangle]

I see everyone has a opinion on "look" but when it comes to the point your wheels are to wide with too much offset to ever work without overs is where they come into play. Spacing out wheels just for the "widebody" look is kinda uncalled for, but to each there own. Whatever you do. if you do a great job itll look good either way you go to me.

[kalypso123]

respect {msg}

[FusionR240sx]

only use em if you need em.
my s14 has crusty fucked up rear qtrs.
so i'm gona use em.

[Om1kron]

And how might one install overs instead? Props for keeping the rivets un-painted... Painted always looks terrible...

I vote rolled/pulled b/c I know my S14 can take big tires. Either way, the only reason to regret doing either is after one does a half ass job... I've seen terrible pulls and terrible overs..and the opposite

http://img.photobucket.com/albums/v299/ted_ni/etc/DSC_3187.jpg

over fenders are awesome!

Lol yeah man... How do you think I was able to fit 18x10 -16s in the rear? Not on stock metal fenders!

I actually molded mine on... So you can't really tell anywaysss.

<3

baaaaaaaaaaaaaaaam.... reading > you.

if that didn't make your dick hard enough, then...

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/vertex%20lang/0319081019-00.jpg
http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/vertex%20lang/0319081019-01.jpg

Ba ba ba ba baaaaaaaaaaaaaaaaaaaaaaaaaaaaaaam...

and I will vouch that his car looks twice as awesome in person, than it does in pictures as I saw it in front of vertex's usa offices when I went to pick up my front fenders.

[Agamemnon]

Roll and pull FTW.
http://www.nissansilvia.com/forums/uploads/post-2-1122901232.jpg

[wh0aitznic0]

not quite bro, slow down.

stock fender metallics

I think you misread my post. What I meant was:

The black hatch on RG-2's and red hatch on SA70's are shitting on this thread.

[TurboSE]

I see a lot of beautiful roll/pulls...is it as easy as it looks?

[lflkajfj12123]

NO. Look at om1kron's pull... his is the best in this thread and look how much work he put into that.

[Om1kron]

NO. Look at om1kron's pull... his is the best in this thread and look how much work he put into (FIXING SOMEONE ELSES MESS.

there fixed that for you... If you're going to pull the stock metal and shove wider wheels down there and not make any support for the fender, it will buckle as soon as the wheel hits your fender lip. Mine wont buckle and you would need a sledge and fair ground strength to bend it the opposite way now.

[kalypso123]

I think you misread my post. What I meant was:

The black hatch on RG-2's and red hatch on SA70's are shitting on this thread.

:hug: {msg}

[tacotacotaco]

pull the fenders and do it right http://i3.photobucket.com/albums/y53/doohopark/DSC02091.jpg

[Om1kron]

did that car ever get finished or did it get a lean put on it? lol

[tacotacotaco]

cars done shops gone

[Tantwoforty]

pull the fenders and do it right http://i3.photobucket.com/albums/y53/doohopark/DSC02091.jpg
and also paint your car right, just like that..
sexxay

[d*star180]

This thread is so stupid. Its OPINION. Do what you WANT.
Its like having a thread about whether blue shirts are better than red shirts.

[soreballz]

^Blue shirts are better than red shirts. Crips fo lyfe, y0.

[kalypso123]

This thread is so stupid. Its OPINION. Do what you WANT.
Its like having a thread about whether blue shirts are better than red shirts.

this thread is for people who bought over fenders or did a pull. and for whatever reason wish they hadn't.

seems coherent to me, :goyou:

its winding down anyway....

[d*star180]

this thread is for people who bought over fenders or did a pull. and for whatever reason wish they hadn't.

seems coherent to me, :goyou:

its winding down anyway....

And ive done both a bunch of times. Never regret anything. Do whatever the fuck you feel like. Were not building NSX's or FD's. Zilvia sucks so hard.

http://i94.photobucket.com/albums/l94/chicagoarea240sx/IMG_8599r.jpg

http://i68.photobucket.com/albums/i23/dstar180/081409190605.jpg

http://i68.photobucket.com/albums/i23/dstar180/030810122122_01.jpg

http://i68.photobucket.com/albums/i23/dstar180/031710160722_01.jpg

[GT Motion]

240's look flat from the side without over fender. Widebody gives them character and pulls off more of a sports car look. Even being flat from the side though they still look sick with negative camber low offset wheels tucked nicely under the fender.

I don't know why you guys are forcing yourselves to pick sides, both can look great.

[GT Motion]

Do whatever the fuck you feel like. Were not building NSX's or FD's. Zilvia sucks so hard.


:stupid:...

[lflkajfj12123]

i'm still sticking by...

buy wheels with correct offset for your car so that you don't need overfenders or some crazy ass pull

[d*star180]

i'm still sticking by...

buy wheels with correct offset for your car so that you don't need overfenders or some crazy ass pull


People dont put overfenders on cars because they bought some ridiculous americanista wheels all the time. People get overs because cars look fucking ROWDY with filled out fatass overs sometimes. Fuck your oem aero, stock metal preaching. That shit aint for everybody. You ever drive behind a car with wheels poking out of giant fucking fenders?
Stock metal is cool and I can appreciate some random jland kouki 180 tucking blitz03's or whatever on mint stock metal just as much as the next guy can, but that shit is just not for me. I need my shit to look like a caricature when im rolling party camber down the highway.

[BustedS13]

pull the fenders and do it right http://i3.photobucket.com/albums/y53/doohopark/DSC02091.jpg

how about a remotely decent picture

http://i3.photobucket.com/albums/y53/doohopark/DSC02120.jpg

http://i3.photobucket.com/albums/y53/doohopark/DSC02098.jpg

http://i3.photobucket.com/albums/y53/doohopark/DSC02101.jpg

[lflkajfj12123]

People dont put overfenders on cars because they bought some ridiculous americanista wheels all the time. People get overs because cars look fucking ROWDY with filled out fatass overs sometimes. Fuck your oem aero, stock metal preaching. That shit aint for everybody. You ever drive behind a car with wheels poking out of giant fucking fenders?
Stock metal is cool and I can appreciate some random jland kouki 180 tucking blitz03's or whatever on mint stock metal just as much as the next guy can, but that shit is just not for me. I need my shit to look like a caricature when im rolling party camber down the highway.

seems like you forgot about your own blog post glorifying the same shit

.: '01 = '09 (http://dorisquad.blogspot.com/2008/09/01-09.html)

i'm not preaching anything, its just that most people are just getting into s chassis immediately think they need huge wheels or extremely low offsets to be cool and resort to over fenders or piss poor fender pulls

both are cool in their own respects i like both but i don't like the look of rivets and i don't like it when the fiberglass cracks from the wheels hitting it

if i were to do overfenders i would mold them

good day edgar

[d*star180]

I didnt forget that post. I love cars like that. I grew up on cars like that. But its just not FOR me anymore. When I WAS going to build an 01-02 car, it was going to have overs on it. I do see eye to eye with you on the idiots obliterating their shitboxes immedieately with horrible zilvia style though. However, if I see one more car with Battle/CST, kouki aero sagging off their faded ass gold/maroon/etc. car with jimmy up, bh world, PG, stickers on it, pretending they have the '01 stock metal style downpat, im gonna claw my fucking eyes out. They should just save everyone some time and market a "Zilvia starter kit" and update it every year.

GROSS.

[kalypso123]

http://i3.photobucket.com/albums/y53/doohopark/DSC02101.jpg (http://zilvia.net/f/view-source:http://i3.photobucket.com/albums/y53/doohopark/DSC02101.jpg)


could be sick, with proper wheel and tire.

[kalypso123]

.: '01 = '09 (http://dorisquad.blogspot.com/2008/09/01-09.html)



01 :love:

http://driftwolrd.com/dw/750.jpg

[d*star180]

Yeah, because we havent seen that and all those other pictures a billion times over. Recyclers are the worst.

[lflkajfj12123]

hahahahaha word up edgar

i totally agree

[3tier240]

http://i76.photobucket.com/albums/j25/TOXiN420/jon240.jpghttp://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs185.snc3/19236_104622936225441_100000332043405_115216_43615 68_n.jpg molded overfenders ftw

[FusionR240sx]

i'll never run front overs ever again.
they suck.

[PoorMans180SX]

molded overfenders ftw

Yeah cool car bro. :rl::down:

[kingkilburn]

OVERS FTW!

http://www.jacquemond.com/t35.jpg




j/k

[s13_jesse]

i love the way 30mm rears look.
http://farm3.static.flickr.com/2770/4468691920_bd8d584d64_o.jpg

but metal for the fronts all day.
http://farm3.static.flickr.com/2731/4473997099_bce9ca11b5.jpg

[lflkajfj12123]

^ i scanned that

[3tier240]

Yeah cool car bro. :rl::down:
hiiii hatersss

[240sxdriftin]

yeah I bought a wrecked chassis, so I did front and rear wide body and I couldnt be happier with how it turned out, I love the look of the wider fenders and rivets, maybe I'm just a ricer fag but fuck it.

http://i7.photobucket.com/albums/y264/onecrew300zx/IMG_0014.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/IMG_0373.jpg

then to this
http://farm3.static.flickr.com/2505/4013047167_06532cc103_b.jpg
http://farm3.static.flickr.com/2641/4013806084_bafc1862aa_b.jpg

I'm happy with my overs

[PoorMans180SX]

hiiii hatersss

Hey molded front bumper boy, welcome to 1997.

[K_style]

yeah I bought a wrecked chassis, so I did front and rear wide body and I couldnt be happier with how it turned out, I love the look of the wider fenders and rivets, maybe I'm just a ricer fag but fuck it.

http://i7.photobucket.com/albums/y264/onecrew300zx/IMG_0014.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/IMG_0373.jpg

then to this
http://farm3.static.flickr.com/2505/4013047167_06532cc103_b.jpg
http://farm3.static.flickr.com/2641/4013806084_bafc1862aa_b.jpg

I'm happy with my overs


looks really good. !!!!

is that 30mm ?

[240sxdriftin]

Tnank you!!!

yes its on the AIT b-magic 30mm front and rear.

[wh0aitznic0]

http://i76.photobucket.com/albums/j25/TOXiN420/jon240.jpghttp://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs185.snc3/19236_104622936225441_100000332043405_115216_43615 68_n.jpg molded overfenders ftw

That looks like shit. Why would you even post that to try to prove a point?

[PoorMans180SX]

That looks like shit. Why would you even post that to try to prove a point?

Thank you. Someone else agrees.

[R Drifter]

In my case it was preety much the only option. When you have a giant dent on the quarter pannel just best to toss on some oversfenders its a quick fix and much better looking than a smashed up quarter pannel , i dont regret it but if i would of gotten it with dent free metal fenders of course i would of stuck with that.

here how it looks as of right now

http://farm5.static.flickr.com/4059/4463693099_df1ae9b0b6_b.jpg
(im taking the picture)

[yingiang]

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs385.snc3/23552_110082579010534_100000263764317_185020_24598 11_n.jpg
NOPE

[reccakun08]

Molded side skirts look EWwWW

[ILoveMyRHS13]

Molded FTW. :jerkit:
http://i47.photobucket.com/albums/f180/kismo14/calpoly240.jpg

NOT. :ghey:

[Chernobyl]

Steel fenders for life. Unnecessary pulls are pretty gross as well. I'd rather do overs than pull the stock rears.

[beardo]

Molded FTW. :jerkit:
http://i47.photobucket.com/albums/f180/kismo14/calpoly240.jpg

NOT. :ghey:


That sunfire is looking dizzoppppeeeee.

[yingiang]

Molded side skirts look EWwWW

mine are not molding if you are referring to mine.
http://hphotos-snc3.fbcdn.net/hs385.snc3/23552_110082575677201_100000263764317_185019_39161 27_n.jpg

[WISH ONE]

Im pretty happy with my fiberglass rears and fronts.
IMO theyre disposable and I try not to stress on them so much or the whole car for that matter.
I do have some metal fronts id like to throw on but i want to play around with them a bit first.
no regrets.
http://i20.photobucket.com/albums/b243/mikeishellafresh/6d03f9e2.jpg

[reccakun08]

mine are not molding if you are referring to mine.
http://hphotos-snc3.fbcdn.net/hs385.snc3/23552_110082575677201_100000263764317_185019_39161 27_n.jpg

not referring to your car. i like your car :coold:

[reccakun08]

http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond6.jpg
http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond1.jpg

[GabeS14]

are there any more pictures of that car though?



Overs FTWhttp://jonsibal.com/bpimages/s14dub_1.jpg

[GabeS14]

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-12-16/2009-12-16017.jpg[/IMG][/URL]
http://farm4.static.flickr.com/3643/3416609904_83434d3911_o.jpg

coolest wheels i've ever seen, but they didn't even fit under the massive over fenders on this car, the stretch was godamned ridiculous. The owner GABES14 said the car handled like dog balls... and it has since been totaled since I've taken these pics in december.

Lol, I dont remember saying the car handled badly..I do remember saying that that day was the day I got the car out of the shop and it was rubbing like crazy everywhere and I didnt want to tear anything up.
I actually ended up tracking it one day with adam, from drift social.

by the way, wheels are almost done repairing, I have the fronts at my house already and the rears are getting retouched up.
I will definitley fit them again, and make it even better.

[kalypso123]

rears are 50mm or 30?

http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond6.jpg

[GripTerror]

i was asking about the HOOD lol

[510-SR20DET]

That looks like shit. Why would you even post that to try to prove a point?

Your face looks like shit. That's the point.

[Black240Ct]

nope i really like over fenders

http://assets.speedhunters.com/Images/Rod%202010/Editorial/June/4.jpg

and my old car

http://farm3.static.flickr.com/2616/3674497371_8805068ab7.jpg

[ILoveMyRHS13]

nope i really like over fenders
I wish Origin made 30mm with that aggressive line on them... I would have bought those.

Anyway, these are just ChaserAero "30mm"
http://i82.photobucket.com/albums/j259/RPS13Doug/240sx%20Build/139.jpg

I only got them to cover up all of the dents on both of my quarters. :naw:

[kalypso123]

I wish Origin made 30mm with that aggressive line on them... I would have bought those.

Anyway, these are just ChaserAero "30mm"



that car's lookin nice bro.

Im also wondering who makes the fenders with the line on them... those are nice.

http://i614.photobucket.com/albums/tt228/kalypso345/yello-1.jpg

[FusionR240sx]

origin type 2 50mm.
maybe they're made for s14's and custom cut to fit better?

[kalypso123]

maybe, but it fits too nicely around the tail light.

those are def nice.

[s142jzkillav10]

wow love the overs

[doublestitch180]

Overfenders or pulled factory metal. I wouldn't regret it eitherway, as long if it's done CLEAN and it fits reasonalbly well.
Everyone to there own.
But for now, pulled factory metal is my choice.

http://www.rspec.org/images/simon/simon2.jpg

[gallo]

fuck molding,

I love the look of metal rivets after fresh paint!

http://i103.photobucket.com/albums/m154/hyperlemondc2/DSC_0073.jpg

raw

what brand are these over fenders, i tried emailing the owner but emails are blocked

[kOOpA]

what brand are these over fenders, i tried emailing the owner but emails are blocked
Origin type 2 and chargespeed both cover the entire quarter, so rule those out. It's a Chicago car, so i'm still assuming Origin. Type 1, maybe?

To answer the question of the thread: I can't "regret" getting overs, coz my car got hit by a truck, and it was the easiest fix. I do wish I could run skinnier wheels sometimes, though; there are SO many cool 9" wheels. Also, I don't prioritize car stuff enough anymore to even think about getting any more wheels that actually fit the 50mm overs; so that's kinda lame.

My stupid thing, Origin Type 2 50mm rears.
http://cfdrift.files.wordpress.com/2012/05/redkarlightson.jpeg

[SamsonS4]

http://image.modified.com/f/features/17371231%2Bw799%2Bh499%2Bcr1%2Bar0/sccp_0211_20_z%2Bc_west_tuning_performance_parts%2 Bs14_silvia.jpg

[SamsonS4]

http://www.carontrack.com/nissan/silvia/silvia027.jpg

[SamsonS4]

http://drift.skayltd.jp/files/D1%20S.L.%20West%202009%20Bihoku%20Rd.1Outstanding %20S14%20widebody.JPG

[SamsonS4]

http://farm6.staticflickr.com/5279/7179480875_dcc8101340_h.jpg

[SamsonS4]

http://i335.photobucket.com/albums/m465/froggman23/2widebodyS14.jpg

http://i335.photobucket.com/albums/m465/froggman23/3widebodyS14.jpg

http://i335.photobucket.com/albums/m465/froggman23/widebodyS14.jpg

[Munki]

rears are 50mm or 30?

http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond6.jpg
http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond1.jpg



That's my old hatch.

Msport vented hood
Msport 30mm wide flare front fenders
Msport 50mm wide flare rear fenders
Msport Front bumper

All legit Msport parts. The Rear bumper and sides are just some cheap knock-offs though. I think the rear was a B-magic bumper and the sides are bn knock-off. cant remember...

[shogun!]

I don't regret installing these Chargespeed front and rears. The ride height is in its highest position during shifting to a new garage.

http://i60.tinypic.com/2m7o0.jpg

http://i58.tinypic.com/2rwb9n5.jpg

http://i61.tinypic.com/2znn3h5.jpg

[pablito_s13]

I had 50mm over fenders...i was super close to cutting my stock fenders...

but last minute i couldn't do it..so i sold them

[Munki]

I had a vertex ridge kit. Took the fronts and rear and added about 25MM more width on each fender. I think the rears ended up being like 60mm... Cant remember what we measured...

I also molded the rears and never saw a single crack! hahaha


http://www.fiber-concepts.net/upload/up/d93ee3b3c1a29132635a92ce61c4ae63.jpg

[Munki]

I had 50mm over fenders...i was super close to cutting my stock fenders...

but last minute i couldn't do it..so i sold them


I actually completely removed my rear quarters before I molded my over fenders, only left a 2-3" lip for the new overs to sit on. I also sealed everything up and poured a few pounds of floatation foam for extra support and noise reduction.

[REVGASM]

So over years. I ended up with Metal up front and FRP in the back. Metals up front handle a beating really well in terms of wheel/tire/fitment abuse(they dont crack)... For the rear, its just too damn expensive to repair metal quarter panels.

In a perfect world, metal all around.

http://revgasm.files.wordpress.com/2012/05/20120502-124707.jpg

[skrouse28rs]

Munki - what color is this ? I just painted mine a couple months ago and they look very similar .


http://www.fiber-concepts.net/upload/up/d93ee3b3c1a29132635a92ce61c4ae63.jpg[/QUOTE]

[Munki]

I think it was just a gunmetal grey from some 2003ish Nissan. Let me see if I can find the paint code.

[TMW]

oh ho, youre gonna regret that

stock body looks better than overs most of the time

just dont pull stock metal because it looks terrible

[240SXK]

i got backed into my driver side quarter sometime last year summer, got money and ended up getting rocket bunny 30mm.. i do miss my stock metal and the big rivets are getting annyoing, need to switch to the smaller.

my quarters were rusty anyways, new england life.

http://imagizer.imageshack.us/v2/1024x768q90/856/gdy2.jpg
.
http://imageshack.com/a/img534/6839/fge2.jpg

[gbaby2089]

Those rivets look HORRIBLE. I can't get into stock metal front and rear overs. Just seems backwards to me.