Z32 BMC upgrade, which lines where?

[aardvark]

About to do the Z32 brake master cylinder upgrade on a s14 (non-ABS). I know I have to bend the lines, but which brake lines go where on the new MC?

[projectRDM]

Same place they did on the old one. F, F, R. It's marked too.

[aardvark]

damn, i'm an idiot. i just looked at it and saw the F and R. should've looked before posting. thanks.

[g6civcx]

If I remember correctly, on the BMC, the rear lines go on the front port, and left/right are on the ports towards the rear of the car.

It's just like your stock BMC. Compared with your stock one to be sure.

[aardvark]

actually, its flipped around. stock is R, F, F (going from back to front). Z32 is F, F, R.
so the rear most line needs to come all the way to front of the Z32...

[g6civcx]

actually, its flipped around. stock is R, F, F (going from back to front). Z32 is F, F, R.
so the rear most line needs to come all the way to front of the Z32...

The FSM for S13/S14 says going from front of the car to back of the car on the BMC: Rear, Front Right, and Front Left. I also checked this on both of my S13s.

On the Z32 BMC, the front port towards the front of the car is labeled "R". I presume this is for the rear lines.

The middle and rearward ports on the BMC says "F", which I presume are the front lines.

So it would be safe to say that they are the same layout.

[dato]

Yes, same layout