Huge garage cleanout. baller parts inside

[wantboost]

Trying to get rid of some extra stuff i dont need so I can pick a caged shell a friend of mine has.
All parts are located in GA. Will ship items at buyers expense, i would prefer the large things (exhaust, bumpers, etc) stay pickup only because shipping is cost prohibitive.
I'm open to reasonable offers for the most part, no trades unless you have something of equal value, etc.

I accept paypal as payment, please add the fee.
Any questions feel free to post or pm me

S13 Sharknose bumper, mint, painted dupont black, comes with grilles and turn signals. Has holes drilled for extra airflow to intercooler
http://img.photobucket.com/albums/v701/Wantboost/IMG_5079.jpg
http://img.photobucket.com/albums/v701/Wantboost/IMG_5077.jpg

$100

S13 Coupe rear bumper.
Painted dupont black, has small bit of exhaust staining, nothing a good cleaner wax wont remove.
http://img.photobucket.com/albums/v701/Wantboost/IMG_5080.jpg

$100

S13 Apexi GT Spec Exhaust. Exhaust is clean, small scrape on bottom of muffler and resonator. Other than that its mint.
http://img.photobucket.com/albums/v701/Wantboost/IMG_5081.jpg

$475

Trust/Greddy td05 25g downpipe
From rhd turbo kit, fits 3 bolt flange 20g/25g turbos

http://img.photobucket.com/albums/v701/Wantboost/IMG_5091.jpg

$250

Blitz/Uras Fatt DC Turbo Timer
D1 Spec, very rare
never used
http://img.photobucket.com/albums/v701/Wantboost/IMG_4975.jpg

$100

Tial 38mm outlet flange
new, cnc machined from 304ss
http://img.photobucket.com/albums/v701/Wantboost/IMG_4989.jpg

$20

JDM TBO Blow off valve.
Uber rare, you cant even find them.
Comes with stainless steel flange for a hose.
http://img.photobucket.com/albums/v701/Wantboost/IMG_4988.jpg

$150

Autometer Ultralite 2 5/16 Oil Temp gauge
electrical
http://img.photobucket.com/albums/v701/Wantboost/IMG_4995.jpg
$30

Autometer Ultralite 2 5/16 oil pressure gauge
electrical
http://img.photobucket.com/albums/v701/Wantboost/IMG_4996.jpg
$30

Autometer Ultralite 2 5/16 EGT Gauge
no probe
http://img.photobucket.com/albums/v701/Wantboost/IMG_4998.jpg
$100

B&M Shift Knob, fits nissan shifters
http://img.photobucket.com/albums/v701/Wantboost/IMG_5003.jpg
$50

Trust sr20det 25g top mount turbo manifold
Fits 50mm 4 bolt wastegates.
has 500 miles on it, over 1200 new
Does not fit LHD cars
http://img.photobucket.com/albums/v701/Wantboost/IMG_5025.jpg
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot035.jpg
$800

Garrett billet adjustable wg actuator
came off of an s14 t28
5psi-whatever you can run
http://img.photobucket.com/albums/v701/Wantboost/IMG_0065.jpg
$50

Custom built PWR intercooler core/ no endtanks
24x9x3, over 480 new, has a few bent fins from sitting around
http://img.photobucket.com/albums/v701/Wantboost/IMG_0071.jpg
$350

HKS T51-R V-Band turbo manifold
no wastegate flange
used
expensive and hard to find
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot037.jpg
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot036.jpg
$800

Turbonetic Raptor BOV
used, has removable trumpet. sounds awesome @ 14PSI
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot028.jpg
$180

HKS S14 SR20DET Top Feed fuel rail
new, comes with all hardware
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot030.jpg
$300

Nismo 60mm EGT Gauge
comes with gauge, harness and control unit, no probe
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot021.jpg
$300

Ikeya Formula sequential shifter
fits nissan 5-spd transmissions
used for one drag run
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot018.jpg
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot012.jpg
$1000

S13 NISMO 280kmh cluster
Stupid rare, only one i've come across
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot013.jpg
$500

Prof Sheepdog BOV
Rare, extremely clean. late style with the flared trumpet.
Comes with flange on 2.5" pipe
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot011.jpg
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot010.jpg
$200

Tomei boost gauge
I dare you to find another one
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot016.jpg
$125

Old School HKS EGT Gauge, no probe
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot017.jpg
$125

Origin Labs s13 sr20det coil pack cover
actual cover off of the origin silvia
http://img.photobucket.com/albums/v701/Wantboost/jdmshiot004.jpg
$100

ebay sr20det turbo manifold
top mount t3/t4/38mm
idled for 5 minutes
http://img.photobucket.com/albums/v701/Wantboost/IMG_0258.jpg
$75

[wantboost]

sr20det custom triple plate clutch
Fidanza custom flywheel
tilton 7.25" ot-ii triple plate clutch
all it needs are the nissan discs from tilton (150)
http://img.photobucket.com/albums/v701/Wantboost/IMG_0257.jpg
$800

Custom built sr20det t3 top mount tubo manifold
not some cheap manifold, 16g tubular manifold, no wg flange.
new
http://img.photobucket.com/albums/v701/Wantboost/IMG_0256.jpg
http://img.photobucket.com/albums/v701/Wantboost/IMG_0255.jpg
$500

GT series return line flange
new, never used
http://img.photobucket.com/albums/v701/Wantboost/IMG_0254.jpg
$20

Z32 maf with pigtail, screens intact
http://img.photobucket.com/albums/v701/Wantboost/IMG_0248.jpg
$125obo


Authentic s13 sr20det greddy intake manifold
greddy sticker was removed when painted
used, lightly
http://img.photobucket.com/albums/v701/Wantboost/IMG_0239.jpg
$450

SAFC 1, comes wih stand and complete harness
http://img.photobucket.com/albums/v701/Wantboost/IMG_0243.jpg
$180

IHI RX8 Ballbearing turbo
Off of the oldschool IRL/CART cars, you cant even buy these... anywhere
the compressor cover and backplate are made from magnesium and hard anodized
the comp wheel is investment cast and is ptfe coated( teflon)
inducer is 74mm,exducer is 91mm
a/r is 1.0
turbine housing is investment cast from titanium
it uses v band clamps for manifold and outlet.
the turbine wheel is a super alloy inconel 738.
inducer is 89mm,exducer 79mm
the a/r is 1.2

dual ceramic ball bearing, weighs only 12lbs
capable of numbers in excess of 1200hp and 55psi
IHI charged race teams 20,000 EACH for these
photos show a z32 t25 for size comparison
was used for one qualifier, been in storage since
own a piece of racing history..

http://img.photobucket.com/albums/v701/Wantboost/IMG_0250.jpg
http://img.photobucket.com/albums/v701/Wantboost/IMG_0251.jpg
http://img.photobucket.com/albums/v701/Wantboost/IMG_0252.jpg
$5,000 obo

[epics13]

thats a nice cluster man seen one for an s14 never knew it came for the s13 as well, too bad its so much i would have copped, GLWS

[XnTroubleX]

Bump for baller parts!! GLWS bro!!

[TurboSE]

Any idea if the Ikeya shifter will fit RB25DET? Does it include the fork and everything to make it work?

[a-s-silvia]

If you could do $300 and some change shipped i will get the exhaust.

[1gr8bar10der]

A lot of cool parts here indeed.

[SickS13RB26]

pm sent this morning

[EndLeSS8]

I 99% of the time never bump for people, but man, bump for INSANE parts.

[Paul2x]

FYI u can get the ikea shifter for $700ish brand new.

I'd buy it to try it out if your price comes down

[wantboost]

Any idea if the Ikeya shifter will fit RB25DET? Does it include the fork and everything to make it work?
if it uses the same pattern spacing as the s13 sr trannies it might, but i dont know for sure

If you could do $300 and some change shipped i will get the exhaust.

theres no way, shipping that thing will cost atleast 150 to the west coast

A lot of cool parts here indeed.

thanks

pm sent this morning

I will call you here in a bit
I 99% of the time never bump for people, but man, bump for INSANE parts.

thanks

FYI u can get the ikea shifter for $700ish brand new.

I'd buy it to try it out if your price comes down

well I'm open to offers, but i picked this up from IF and it was like 1200 plus shipping. pm an offer and i'll see what i can do

[mau5trap]

oil temp and oil pressure gauge $40 shipped to 90638?

[ka24det92]

is the origin lab coil cove made of plastic or metal

[MitchellBade]

300 for the cluster?

[wantboost]

pm's replied
SAFC sold
Wastegate sold
Fuel rail pending
Nismo cluster pending
Origin Labs coil pack cover pending.

[MitchellBade]

Hey clear your pm's. Tell me how much for the cluster and origin cover with the paypal fee to send you please. Also tell me your paypal name so I can send it. It takes forever to scroll back up on my phone so I don't know if it's listed up there. Thanks man

[wantboost]

Nismo cluster sold
Fuel rail sold
Ebay mani sold
Coil pack cover sold

open to ALL reasonable offers, get this crap out of my way

[TheWayItGoes909]

I have That same Tomei boost gauge

[SWAT Team S14]

Man, I always wanted to try out one of those IF shifters....I just can't rationalize spending that much on a shifter, esp when my car needs sooo many other parts. But it is def a BALLER piece. GLWS bro, some nice parts here!!!

[rioredstang]

Hey, I'm interested in the shifter, and maybe the clutch. Sent you a PM, haven't heard back. Send me PM.

[seanforney]

free bump for sweet parts!!!!

[Fullboost99]

how much shipped for the SR turbo exhaust that you have for 75 bucks, to 28269?
and were their any issues leaking etc.... Thanks bro!

[thrasher324]

hey is that turbo next to the big one on sale? was it off sr20? or rb25?

[broncos97]

bump. very nice parts

[WorkInProgress]

I'd really like to get the front bumper from you. I pm'ed you already. Awaiting response.

[kabukie]

PM'ed you about the Oil Pressure and Temp Gauages. Do they include working sending units? Very interested. LMK

[racerx2k1]

Last Activity: 04-15-2010 09:20 AM