Part out S13 - Z32 brakes - Ka24de motor and parts- STUFF MUST GO!!!

[Gorilla Unit 33]

Name: LJ
Contact: 484 995 8188 or Email Gorilla4design-AT-gmail.com

The best way to reach me is on my cell. Any questions PLEASE feel free to ask, i think that makes everyone feel better doing a transaction with one another so i encourage you to question whatever you feel.

I LOWERED SOME OF MY PRICES FROM MY LAST THREAD, PLEASE IF ITS SAYS FIRM THATS MY BOTTOM LINE PRICE DONT ASK ME TO GO ANY LOWER BECAUSE I WONT. ALSO I WILL NOT PART OUT THE MOTOR OR ANYTHING LISTED WITH THE MOTOR, unless other wised listed.


Engine, Radiator setup and Drivetrain
BRAND NEW Mishimoto 14'' fan
BRAND NEW Mishimoto Radiator
BRAND NEW Red OBX Rad hoses
Dual 248 Cams
COMPLETE Full Emissions Removal
BRAND NEW Sard Thermostat
Complete Engine and Transmission Harness INCLUDED
(with ps pressure sensor eliminated and egr resistor eliminated)
MSD Coil AND IM INCLUDING THE OEM ONE ASWELL
ECU
New Clutch slave cylinder
New Belts
New Xcessive Thermal Intake manifold gasket
New Felpro intake manifold middle gasket
New Felpro Valve cover gasket
New OEM Valve cover hardware
New OEM Oil Pan gasket
New OEM Shifter plate gasket
NEW PCV VALVE
NEW OIL FILTER (Includes an extra one aswell)
Recently rebuilt starter 1 month old
Water pump replaced 8,000 miles ago
Distributor and wires replaced 6,000 miles
INCLUDES ALTERNATOR, PS PUMP, Injectors, Fuel Rail and New Z32 Fuel Filter
(will include OEM clutch fan and shroud)

$900 with EVERYTHING - This is everything, every component you need to have a complete running motor swap except for a header, with lots of fresh brand new parts installed.

*if someone wants the header when buying this whole setup i will give them the best price.

http://i90.photobucket.com/albums/k253/gorillaunit33/DSC_0057.jpg

http://i90.photobucket.com/albums/k253/gorillaunit33/DSC00899.jpg

__________________________________________________ _______________

Z32 26mm Aluminum Front & Rear calipers + Z32 MC + BRAND NEW SPL brake lineshttp://images.intellitxt.com/ast/adTypes/mag-glass_10x10.gif (http://zilvia.net/f/#) + used pads with LOTS of life left- $400 FIRM PICKED UP ***WILL NOT SHIP***

__________________________________________________ _______________

BRAND NEW Mishimoto 14'' fan price, BRAND NEW Mishimoto Radiator price & BRAND NEW Red OBX Rad hoses WITH TBOLT CLAMPS - $275 for it all Will not part

__________________________________________________ _______________

Hot Shot Header 4-2-1 w/ the optional Jet coating - $325 OBO BRAND NEW you wont find a new one anywhere RARE (MSRP on this header was in the $400+ range, and its been discontinued for a couple years now)

http://i90.photobucket.com/albums/k253/gorillaunit33/DSC_0016-1.jpg

http://i90.photobucket.com/albums/k253/gorillaunit33/DSC_0012.jpg

http://i90.photobucket.com/albums/k253/gorillaunit33/DSC_0014.jpg

__________________________________________________ _______________

HKS Hi-Power Exhaust - Header back with Magnaflow Cat - $270 OBO WILL NOT SHIP

http://i90.photobucket.com/albums/k253/gorillaunit33/IMG_01221.jpg

__________________________________________________ _______________

JDM Climate controll unit - $ 40

http://i90.photobucket.com/albums/k253/gorillaunit33/-3-1.jpg

__________________________________________________ _______________

Personal Neo Grinta Steering wheel w/horn button (black suede with red stiching) - $200 FIRM

Works Bell BOSS Hub - $50 FIRM

NRG Short Quick Realease RED - $75 FIRM

***DEAL*** BUY ALL 3 FOR $300 PICKED UP! ***DEAL*** **** PENDING TRANSACTION****

http://i90.photobucket.com/albums/k253/gorillaunit33/photo2-1.jpg

__________________________________________________ _______________

New OEM 3M poly filled engine mounts -$40

New Nismo 3M poly filled Trans mount - $50

http://i90.photobucket.com/albums/k253/gorillaunit33/filledmountscopy.jpg

__________________________________________________ _______________

Stealth fab Front Strut Tower bar (powdercoated chrome) $110 FIRM
Stealth fab Rear Strut Tower bar (powdercoated chrome) $70 FIRM
Stealth fab Lower Tension bar brace - $75 FIRM

***DEAL*** ^ PICK THEM ALL UP FOR $250 ^ ***DEAL***

BRAND NEW Ka24de Powdercoated Wrinkle red valve cover with polished letters - $80 obo
S13 Radiator Brackets Powdercoated Wrinkle red - $20 obo

http://i90.photobucket.com/albums/k253/gorillaunit33/11111.jpg

http://i90.photobucket.com/albums/k253/gorillaunit33/DSC00590.jpg

__________________________________________________ _______________

DSM 450cc injector Clips with harness- $25
DSM 2g MAF w/pigtail and oem intake pipe - $50

[Rb20detboy]

Hey bro I'm really interested in the brake set up and radiator combo. If you decide to ship let me know my zip is 94566 or email me at [email protected] so we can set something up

[Gorilla Unit 33]

Hey bro I'm really interested in the brake set up and radiator combo. If you decide to ship let me know my zip is 94566 or email me at [email protected] so we can set something up
I will not ship the brake setup, unless your willing to pay a hefty shipping charge. Even though they are aluminum, they are not light. If your $100% intrested and paypal me the money covering the purchase price +3% for paypal, id be willing to try the new offer USPS is having, where they have a standard size box and whatever you ship in it no matter how much it weighs ships for $10 ANYWHERE in the US. Sounds like a deal and if they fit should work to your benefit especially since your on the opposite coast. PM me if your ready.

[ILoveMyRHS13]

Yo, me and my buddy are down for the Steath Custom brace deal. Cash in hand, let me know.

[Gorilla Unit 33]

Yo, me and my buddy are down for the Steath Custom brace deal. Cash in hand, let me know.


Your in luck im on my way to lancaster right now if you want to meet up with me. CALL ME ASAP 484 995 8188

[Gorilla Unit 33]

Or not... that sucks cause it would have saved you the ride out here im about an hour away from paradise lancaster, pa

[Gorilla Unit 33]

Bump#2!!!!!

[Gorilla Unit 33]

Ok bump #3

[Gorilla Unit 33]

Bump#4 bahahahaha

[TurboSE]

How much to ship the Stealth Fab tension bar brace to 17331?

[ms!3]

you willing to sell your acc harness?

[beatd]

yo i'm interested in the motor.. can i take a look at it? i'm located in cherry hill nj..

[smelly240]

i can vouch for him and his motor ;)

[racerx2k1]

Or not... that sucks cause it would have saved you the ride out here im about an hour away from paradise lancaster, pa

Bump#2!!!!!

Ok bump #3

Bump#4 bahahahaha

2 bump limit. You can start new thread in 3 days.