ughhhh turn signal woes! no signal or hazards

[nathanong87]

this may be really trivial, but my turn signal situation has me going crazy

1. driving down the road and i noticed signal blinking fast , so that means that a bulb is out or something.... but i DID have hazards
2. go to check and indeed bulb is broken (left unplugged due to event, and neglected to replug)
3. driving again, and then noticed that i have no turn signals at all and also NO hazards

i have since replaced the broken bulb and nothing. no signal noise or hazards.... any ideas? is there even a separate turn signal fuse that may* be blown? both my R and L city and headlights work.

thanks in advanced!

[supreme_1]

look into your hazard signal button. mines was bad. my symptoms were hazards would work when it wants to, turn signals wouldnt work at times, when i hit bumps it would flash but then fail quickly there after. it would blink fast and dim at times.

[nathanong87]

figured it out.

1. checked to see if power was present to bulbs....it wasn't
2. checked to see if hazard button was good. it was
3. checked to see if the combination flasher unit was good...it was
4. checked to see if the fuses for the hazard AND turns were blown....BOTH WERE BLOWN.

i thought it was rare to see both go out simultaneously , but i replaced the fuses and indeed i have turns and hazards once again.

FSM helped alot!

hope this thread could* help someone who needs help too