z32 stuff, garage cleanup

[upsdude]

yet another garage sale :) help me clear some room!

z32 uprights $45 or trade for s14 rear uprights.

http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1039.jpg
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1040.jpg

z32 stock rear rotors $30
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1037.jpg

drilled/slotted front z32 rotor (i only have one) $40 **fits 30mm caliper**
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1036.jpg

z32 rear axles: $45 for the pair-only problem is the driver's side has a ripped boot. but they come with the output shafts still attached.

http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1041.jpg
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1042.jpg
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1043-1.jpg

short shifter from Bings, has new shifter bushing $30
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_1038.jpg
i cut it down about an inch from what it was originally.

oil pan with the bung welded in $50
the bottom has a dent...don't know if it affects/hinders performance. it needs a good cleaning.
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_0574.jpg

n60 MAF $40
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_0641.jpg
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_0643.jpg

z32 17/16" bmc. $30
don't know if it works, but can be rebuilt, cannabalized for the fittings...
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_0765.jpg
http://i558.photobucket.com/albums/ss23/ekfanatic/IMG_0766.jpg

[LOUD240]

Hey jason I'll take the shifter!! give me a buz

[jayrawr]

does the shifter have the infamous rattle noise?

[pallnet]

Sir
I'm interested in the shafts. Can you give me a shipping quote to 70458?
Thanks
pallnet

[upsdude]

shippin on the axles? ewww sure but you'll have to cover the cost them suckers are heavy...gotta find a box for em i'll pm ya when i get that squared away:)

as for the shifer-honestly i don't know about the rattle since i've never installed it.

[pallnet]

I'm really in need of only the inner CV assemblies, boots and the stub shafts. You wanna cut the axels right after the inner boots and ship the inner goods in a flatrate box and pitch the rest? Is that a possible option?
Thanks going to bed, I will check tomorrow.
pallnet

[Prez]

shifter still here?

[upsdude]

negative sorry