Help!! in San Diego

[RoyalFortune]

Hey I was just wondering if there was anyone Knowledgeable and willing in San Diego to help a guy out with my SR20 swap. I have the engine installed and there is no spark. I have already tried a few thing like swap the ignitor chip, if there is anyone out there with a multimeter that can check voltage while crank, let me know.

Thank for the help

[fcdrifter20]

check ur wiring at the chasis plug. most likely ur problem is there. usual the problem i have when ppl bring me there cars after doing there own swaps

[payne219]

i might be able to help... I have a DMM and im in Sd. where you at exactly?

[RoyalFortune]

Im located in the college area.

[payne219]

have you hooked up your ground for the coilplugs?? Its at the back of the motor and bolts to the firewall i think. if thats not hooked up you dont get fire.

[RoyalFortune]

have you hooked up your ground for the coilplugs?? Its at the back of the motor and bolts to the firewall i think. if thats not hooked up you dont get fire.

Are these the grounds you are talking about ?
BTW thanks for the help.

[payne219]

there are some grounds that should be hooked to the intake runner. there is also another ground directly behind the engine close to the rear of the valve cover. pretty sure it needs to be connected to the firewall of the engine bay.

[SDS13COUPE]

sent you a pm.