PDA

View Full Version : Clutch Bleeding


Josh95SE
06-13-2003, 02:00 AM
ok ive bled the clutch flued and pumped out all of the air (i say that because no more air is comming through the line). but the clutch petal is still loose and doesnt come all the way back up. im bleeding it from under the car on the passanger side. am i doing something wrong? any help is greatly appriciated. thanks in advance.

S14Speed997
06-13-2003, 06:29 AM
I just had to replace my cylinders and bleed for the first time...If you go ahead and do a search on "clutch bleeding"..There is a post for pretty much every problem you can think of...
Hope that helps some....Eric

**The one problem I had: we had someone pushing the clutch, me under the car turning the bleeder valve, and another filling the fluid reservoir................well the clutch was pushed to the floor, AND we didnt put the cap on the master cylinder, in which case we couldnt get pressure for the clutch to pop back up....so we put on cap, pumped clutch, and bingo it worked....**